• Corrosion Science and Technology
• /
• 제9권4호
• /
• pp.143-146
• /
• 2010

For the issue of flaking of the hot-dip galvanizing coating during drawing, the microcosmic characteristics of the coatings have been analyzed and experiments have been done to investigate the influence of coating thickness, Al content and steel substrate strength on its flaking-resistance. The results show that the fact of flaking is that the coating partially flaked off at the position far away from interface of steel substrate and coating, and not entirely flaked off from steel substrate because of poor adhesion. The flaking-resistance of coating decreases with the increasing of coating thickness and steel substrate strength, and increases with the increasing of Al content in coating at the same experimental conditions.

• Journal of Welding and Joining
• /
• 제5권2호
• /
• pp.27-34
• /
• 1987

The characteristics of arc sprayed layer were studied with hardness test and microstructural observation. The erosion resistance of arc sprayed layer was also evaluated using a method of steel ball blasting test which was proposed in this study as a test method for measuring the erosion properties in the impact wear condition. By an impact of the molten droplets on the redeposited substrate, lamella structure was formed which contains laminated oxide layers, fissures, and porosities. As a result of mechanical tests, it was shown that the sprayed specimen showed higher hardness than the substrate, but it resulted in higher erosion rate than the substrate. The poor erosion property obtained with a sprayed coating was considered to be attributable to easy flaking off the the layers laminated with brittle oxide layers.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1575-1578
• /
• 2005

As GA(Galvannealed sheet steel, GA) has good corrosion resistance, weldability and paintability as well as excellent stamping formability it's demand is rapidly increasing for automotive panel. But the layer of the Galvannealed sheet steel is easy to have a coating layer such as powdering and flaking in the press process because it is composed of Fe-Zn alloy. Therefore, the process condition is properly required to form the surface treated sheet steel. The frictional characteristics with dies are changed according to the annealing temperature, $505^{\circ}C,\;515^{\circ}C\;and\;540^{\circ}C$ during the process. To obtain the frictional characteristics of GA sheet steel in this study, on flat friction test is conducted. The friction coefficient is compared with the variation of pressure and velocity, viscosity of lubricant at the various galvannealed temperatures.

• 한국지반환경공학회 논문집
• /
• 제17권5호
• /
• pp.17-25
• /
• 2016

지표에 노출되는 암석은 기상작용 등의 영향으로 풍화가 가속되며, 풍화작용은 광물의 성질을 변화시켜 암석의 안정성을 저하시키게 되므로 암석의 풍화에 대한 저항은 광물의 조성을 파악하는 것이 중요하며 이는 풍화 민감도 분석을 통해 이루어진다. 따라서 본 연구에서는 시추된 시료에 대한 현미경 박편 시험을 실시하고 모드분석을 통해 풍화 취약광물의 구성비를 측정하였으며, 이를 통해 대상사면의 암석학적 광물학적 풍화요인을 평가하였다. 또한, X-Ray 회절분석을 이용하여 암석을 구성하는 실제적인 광물조성을 정량적으로 측정하고 주사현미경관찰을 통해 이차광물을 동정하여 풍화의 진행 정도를 파악하였다. 이러한 풍화 민감도 기법을 통하여 풍화 저항도를 판단할 수 있는 적절한 지시자를 결정할 수 있으며 화학적 풍화속도를 이용한 풍화등급의 예측이 가능할 것으로 분석되었다.