• Imaging Science in Dentistry
• /
• 제35권3호
• /
• pp.121-125
• /
• 2005

Purpose : The purpose of this study was to investigate whether the fractal dimension of successive panoramic radiographs of bone after implant placement is useful in the characterization of structural change in alveolar bone. Materials and Methods. Twelve subjects with thirty-five implants were retrospectively followed-up from one week to six months after implantation. Thirty-six panoramic radiographs from twelve patients were classified into 1 week, 1-2 months and 3-6 months after implantation and digitized. The windows of bone apical and mesial or distal to the implant were defined as periapical region of interest (ROI) and interdental ROI; the fractal dimension of the image was calculated. Results There was not a statistically significant difference in fractal dimensions during the period up to 6 months after implantation. The fractal dimensions were higher in 13 and 15mm than 10 and 11.5mm implant length at interdental ROIs in 3-6 months after implantation (P<0.01). Conclusion : Longer fixtures showed the higher fractal dimension of bone around implant. This investigation needs further exploration with large numbers of implants for longer follow-up periods.

• 품질경영학회지
• /
• 제23권4호
• /
• pp.128-147
• /
• 1995

An accelerated life testing(ALT) for aluminum electrolytic capacitors is conducted and analyzed. A testing equipment, which consists of part fixtures, relay board, controller, video bridge and microcomputer, is made for the ALT. Load factors are temperature with four levels and voltage with three levels. Base on 'optimized 4:2:1 plan', 2,000 electrolytic capacitors are allocated at 12 experimental conditions(; 4 levels of temperature ${\times}3$ levels of voltage), and the ALT is conducted. From the experimental results, an acceleration model is derived and acceleration factors are estimated. A discussion on the experimental results is included.

• 한국전자파학회논문지
• /
• 제25권12호
• /
• pp.1228-1235
• /
• 2014

UHF RFID 태그를 설계하기 위해서는 태그 칩의 입력 임피던스 값이 필요하다. 입력 임피던스 산출에는 직접측정 방법이 보편적으로 사용되고 있다. 본 연구에서는 이 방법을 사용할 경우, 칩을 측정장치에 연결하기 위해 도입되는 픽스쳐에서 발생되는 문제점을 분석하고, 그 결과를 확인하였다. 이 문제를 근본적으로 피해갈 수 있는 대안으로 모델링 방법을 제안하고, 실험을 통해 타당성과 정확도를 확인하였다.

• 전기학회논문지
• /
• 제60권6호
• /
• pp.1178-1182
• /
• 2011

The best methods for distribution controled of LED lighting fixtures is control to designed LED chip array, lens and reflector. However, lens design need distribution design to reflector for low-wattage LED lighting because of difficulty of production and reduction of light efficiency. In addition, it needs maximize of thermal performance to improve the efficiency and reliability of device. As a result, for the height of reflector 40[mm] and Inclination 25[$^{\circ}$], we can see the best distribution properties, and, in the thermal properties, junction temperature MCPCB 62.9 [$^{\circ}C$], FR4 PCB 89.6 [$^{\circ}C$], FR4 PCB from Via-hole is 63.1 [$^{\circ}C$]. it may improve for thermal properties for makes the Via-hole.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 학술대회 논문집
• /
• pp.163-168
• /
• 2004

The improvement of perspectives on dark and limited underground space could be an important factor in successful underground space development. Current trend in the apartment underground parking lot requires not only quantitatively energy efficient design and operation, but also qualitative improvement of the space. For this, we need to consider two factors: Firstly, to understand the characteristics of the fluorescent lamp. Secondly, to improve the uniformity ratio of illuminance. In winter season, a way to keep the uniformity and a method not to lower the indoor illuminance level by cold ambient air. Therefore, a change in interval and arrangement of the lighting fixtures is required. Also, in their operation, current time-fixed control method needs to be changed into the control that method considers the use pattern.

• 한국주거학회논문집
• /
• 제16권2호
• /
• pp.1-10
• /
• 2005

The purpose of this study is providing useful information for consumer-friendly house plan by investigating remodeling apartments according to the area type and size. In order to achieve this aim, case study was applied. The case study was conducted of five small, medium, and large size apartments through depth-interviews, actual survey, and questionnaires on the remodeling behavior, interior design, and interior atmosphere. The results of the study are as follows: Structural alterations were frequent in communal area, and then in private and household areas. Changing lighting fixtures was frequent in all area types, and especially, in communal areas installing extra decoration was frequently observed. Besides, alterations of doors and window frames were carried out in communal, private, housework and service areas by using wood, aluminum sashes, double-glazing, and paint coating. Finally, in housework areas the material and color of counters were changed into wooden and achromatic.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2002년도 학술대회논문집
• /
• pp.181-185
• /
• 2002

This paper gives an assessment criteria and reliability improvement for high frequency power supply of high efficacy electrodeless fluorescent lamp. The electrodeless fluorescent lamp system consist of electrodeless fluorescent lamp, high frequency power supply and lighting fixtures. The high frequency power supply has a shortest life at the system. Therefore It is need to assess the Failure Rate or Mean Time To Failure(MTTF) for the high frequency power supply of electrodeless fluorescent lamp system and improve the reliability at design. We suggest the assessment criteria and improve methods of the reliability on the design basis for the electodeless fluorescent system.

• 동력기계공학회지
• /
• 제7권2호
• /
• pp.51-55
• /
• 2003

Recently the requirements for light weight and high performance of the automobile have increased. Especially, the plastic fuel tube makers have made their efforts to dove]op the various plastic fuel tube module with not only dimensional accuracy but also cost competitiveness. The experiment is performed to investigate spring backs for PA12 plastic fuel tubes in case of compound bending. In the experiment, steam bending process is adopted as bending method. In this study, the results we obtained are used to design the bending fixtures and the compound bending system.

• 산업공학
• /
• 제7권2호
• /
• pp.107-120
• /
• 1994

This study introduces a scheduling policy to achieve unmanned operations in machining shops representing the feature of both FMS and machining centers. The proposed policy considers the practical constraints in the machining shops such as lot sizes, multiple pallets, and jig/fixtures. In addition, rescheduling to cope with extraordinary events(eg., arrival of high-priority jobs and breakdown of machines) is included. Basically, the scheduling policy consists of four procedures; (1) selection of a job according to dispatching rule, (2) selection of a machine, (3) assignment of jobs to a multiple pallet for the unmanned operation during a certain shift, and (4) prevention of unexpected machine idle caused by constraints on jig/fixture.

• 대한산업공학회지
• /
• 제21권1호
• /
• pp.51-65
• /
• 1995

This paper presents an automatic fixture planning system for machining processes of prismatic parts. A rationalized approach to integrate fixture planning with process planning is proposed and representation schemes for workpiece, part design information with features, machine tools, cutting tools and fixtures are developed. The proposed system implements two activities of fixture planning such as machining of reference surfaces and machining of features. For machining of reference surfaces, the machining sequence of reference surfaces is determined by using decision tables, which are drawn from relations of part dimension, degree of surface roughness, fixture type and its capacity, cutting tool's capacity and experienced planners' knowledge. For machining of features, a preferential machining orientation is selected for its feature which can be machined in more than one direction, and features with the same machining orientation are grouped, and the machining sequence of features is determined by interactive mode. A case study is performed to show the performance of the proposed system.