• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1991년도 추계학술대회 논문집
• /
• pp.121-125
• /
• 1991

In order to minimize fixing error of workpieces, prismatic and cylindrical types. Modification Rule by Indexing Table and Modification Rule by NC Program are developed for machining centers by using touch trigger probes. The Modification Rule by Indexing Table means the alignment of workpiece to NC program through degree of freedoms of indexing table. The Modification Rule by NC Program is the alignment of NC program to workpiece set-up condition via the generation of NC program. A postprocessing module is also developed for generating NC-part Program (User Macro) to compensate for Machining errors in end milling and boring processes. Developed methods are verified by experiments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전기설비전문위원
• /
• pp.3-5
• /
• 2008

Electricity Technology Management Act were carried out enactment in last 1995 to prevent illegal construction practices of electricity equipment, Later electricity supervision service is ordered to electricity supervision trade who register by law demarcated Dept of Architecture, Wish to investigate present condition and problem of current electricity supervision system in this treatise and present improvement plan for right fixing of electricity supervision system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.543-546
• /
• 2000

Static and dynamic experiments were done to study on the restitution behaviors of strings. The elastic and viscoelastic model were compared. To apply a linear viscoelastic model (Kelvin model) to longitudinal behaviors of strings, static and dynamic tensile tests were done. Using their results, it should be intended to acquire damped stress (Stress related to velocity), and to calculate the viscoelastic coefficient. Fixing both ends, string was pushed by the loadcell attached to the tensile tester. The experimental results were in accordance with the calculated results using the Kelvin model acquired from the results of longitudinal tensile test. But the results of falling mass experiments, the behaviors of strings were near to elastic model. The clamping condition of strings in both sides has an effected on the value of COR. The smaller contact area, the grower the value of COR.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.14-18
• /
• 1996

From the experimental study of Wire-Cut EDM of die-material(SKD-11), machining characteristics such as machining rate, surface roughness and hardness have been observed and evaluated under the conditions varing pulse on time, pulse off time, peak voltage after fixing other conditions. It was found that various operating conditions have significant influences on machining rate, surface roughness. Hardness of workpiece was unaffected by operating conditions.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.173-178
• /
• 2003

Recently, according to the development of mechatronics industry that was composed of NT, ST, IT, RT and etc, the 1 necessity of nano-parts was increased. Because of the necessity, this research was started for improving work precision of the parts as fixing UPCU( Ultra Precision Cutting Unit)on lathe. So, in this research we executed the modeling of UPCU (Ultra Precision Cutting Unit) by the application of PZT, the relationship between the displacement of tool in UPCU and the cutting force of it has been in take a triangular position in the case of plane cutting. The modeling of system that is containing the fine displacement was performed. Also, we found like to find the optimal cutting condition through the simulation of relationship between the displacement and the cutting force.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2011년도 춘계학술발표대회 논문집
• /
• pp.265-270
• /
• 2011

This paper describes a reliability/durability test of the remanufactured steering gear units. There used to be government restrictions to remanufacture certain types of automotive components regarding safety of passengers. Nevertheless, scientific approach to sustainability and remanufacturing process provided solid evidence of highly beneficial sides of reusing the products. Failure mode analysis of the steering gear unit is performed and main failure is found out. The unit is remanufactured by fixing the failure and its quality is assessed through designing a new sequence of loading events. Oil leakage is witnessed as a possible failure and its volume is measured. Conclusions based on laboratory condition durability test are given at the end.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2020년도 제62차 하계학술대회논문집 28권2호
• /
• pp.649-652
• /
• 2020

본 논문에서는 스타크래프트 게임이나 리그 오브 레전드 게임 등의 이용자끼리 실력을 겨루는 PVP 형태의 온라인 게임들에서 일어나는 어뷰징에 대해서 실태를 조사하고 이에 따른 개선 방안을 제시한다. 어뷰징에 관하여 알아보고 어뷰징이 게임과 일상에서 어떻게 작용하는지 설명하고 유저들이 어뷰징으로 인한 피해를 입는 사례를 조사하고 현재 개발사들의 조치 방안 및 유저 커뮤니티의 의견 등을 통해 실태에 대해 내용을 제시한다. 결론으로 조사한 자료를 바탕으로 어떻게 하면 어뷰징을 좀 더 방지할 수 있는지에 대한 개선 방안을 제시하고 게임 운영 차원에서 어떤 방식으로 지원해야 하는지를 제시한다.

• 한국토양비료학회지
• /
• 제20권3호
• /
• pp.261-268
• /
• 1987

논상태(狀態)의 토양(土壤)에서 유기물(有機物)의 종류(種類), 질소비종(窒素肥種) 및 시비량(施肥量)을 달리했을 때 광합성(光合成) 및 타양성질소고정미생물(他養成窒素固定微生物)에 의한 생물학적(生物學的) 질소고정량(窒素固定量)과 Kjeldahl 분석(分析)에 의한 토양중(土壤中) 전질소함량(全窒素含量) 변화차이(變化差異)를 알고저 초자실(硝子室)에서 60일(日) 담수시험(湛水試驗)한 결과(結果)를 요약(要約)하면 다음과 같다. 1. 각종시용유기물중(各種施用有機物中) 탄소(炭素) 1mg당(當) 생물질소(生物窒素) 고정량(固定量)은 glucose 0.13mg, 볏짚 0.09mg, 그리고 양송이 폐상퇴비와 보리짚은 0.07mg이였다. 2. 토양종류(土壤種類)에 따른 질소고정량(窒素固定量)은 질소비종(窒素肥種)에 따라서 상이(相異)했으며 시비량(施肥量)이 증가(增加)할수록 감소(減少)했는데 감소(減少)의 정도(程度)는 유안(硫安)보다 요소시용시(尿素施用時) 현저(顯著)하였다. 3. 광조건별(光條件別) 질소비종(窒素肥種) 및 시비량(施肥量)에 따른 질소고정량(窒素固定量)은 사질토양(砂質土壤)에서 유안(硫安)이 요소(尿素)보다 증가(增加)되었으며 전질소고정량중(全窒素固定量中) 75%는 광합성미생물(光合成微生物)에 의하여 그리고 25%는 타양성질소고정미생물(他養性窒素固定微生物)에 의하여 고정(固定)되었다고 추정(推定)할 수 있었다. 그러나 식질토양(埴質土壤)에서는 광조건(光條件)과 질소비종간(窒素肥種間)에 뚜렷한 차이(差異)는 보이지 않했다. 4. 시험전후토양(試驗前後土壤)의 질소함량(窒素含量)을 보면 사질토양(砂質土壤)은 처리(處理)에 관계(關係)없이 시험후(試驗後) 토양(土壤)의 질소(窒素)가 현저(顯著)히 감소(減少)되었는데 그 정도(程度)는 요소시용구(尿素施用區)의 광차단조건(光遮斷條件)에서 현저(顯著)하였다. 한편 식질토양(埴質土壤)에서 비종간(肥種間)에는 큰차이(差異)를 볼 수 없었으나 광차단조건(光遮斷條件)에서 질소(窒素)의 감소(減少)가 현저(顯著)하였다. 5. Acetylene 환원법(還元法)에 의한 생물질소고정량(生物窒素固定量)과 Kjeldahl 분석(分析)에 의한 전질소함량변화차이(全窒素含量變化差異)는 평균(平均) 6:1의 비율(比率)을 보였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.603-606
• /
• 2006

We present a study on the development of a practical and quantitative technique for the assessment of the structural health condition with using piezoceramic(PZT) sensors. The electro-impedance-based technique with the PZT patches is very sensitive for evaluation of the incipient and small damage in a high frequency range, and however the commonly traditional modal analysis method is effective only for considerably larger damages in low frequency range. The paper presents the technique in detecting and characterizing real-time damage on the specimen that is an aluminum plate fastened with bolts and nuts by different torques and as well a plate with a crack. By using the special arrangement of the PZT sensors, the required longitudinal wave is generated through the specimen. A large number of experiments are conducted and the different conditions of the specimens, i.e. the location and extent of loosening bolts, and the plate with a crack are simulated. respectively. Since fixing and loosening the loosened bolt is controlled by a torque wrench, we can control exactly the experiment of the different torques. Compared with the simulated healthy condition, we can find whether or not there is a damage in the specimen with using an impedance analyzer with the PZT sensors. Several indices are discussed and used for assessing the different simulated damages. As for the location of bolt loosening, the RMSD is found to be the most appropriate index for numerical assessment and as well the RMSD shows strongly linear relationship for assessing the extent of the bolt loosening, and the frequency peak shift ${\Delta}F$ is used to assess the cracked plate. The possibility of repeatability of the pristine condition signatures is also presented and the appropriate frequency range and interval are uniquely selected through large numbers of experiments.

• 한국광물학회지
• /
• 제23권3호
• /
• pp.219-225
• /
• 2010

저등급 석탄인 갈탄(lignite)을 순환 유동층 가스화기(circulating fluidized bed gasifier)의 효과적인 가스화를 위한 공급탄으로 제조하기 위하여 모든 조건들은 동일하고 스크린의 크기만을 변경하여 목적하는 입도분포 특성을 달성하는 최적조건을 찾기 위한 실험을 수행하였다. 가스화기 공급탄은 0.045~1 mm 크기로 85 wt% 이상이 요구되며 이러한 입도분포를 갖는 공급탄을 제조하기 위해서는 경제적이면서도 효과적인 공정 설계가 반드시 필요하다. 따라서 본 연구는 중국산 갈탄을 해머밀로 효과적으로 분쇄하기 위하여 다구치 설계를 사용하였으며, 설계조건에 따른 실험결과 및 통계분석 결과 95% 유의수준에서 1차 스크린의 크기는 3 mm, 2차 스크린의 크기는 1.3 mm인 경우가 최적화된 조건인 것으로 나타났다.