• Archives of Reconstructive Microsurgery
• /
• v.7 no.2
• /
• pp.135-145
• /
• 1998

In 1980 Morrison and O'Brien reported their experiences about the reconstruction of amputated thumb using wrap-around neurovascular free flap from the great toe with a nonvascularized iliac bone graft. From then it has been considered to be a good reconstructive procedure for the amputated thumb, but it's indication has been limited distal to the metacarpophalangeal(MP) joint. We have performed 37 cases of wrap-around free flap from the great toe for the reconstruction of thumb amputated at distal or proximal to the MP joint and investigated their functional results according to the level of amputation. Level of amputation was distal to the MP joint in 25 cases and proximal to it in 12 cases. Pinching and grasping power, two point discrimination and the amount of opposition to the other fingers were compared to the uninjured hand. Pinching and grasping power were not significantly different according to the level of amputation but the amount of two point discrimination was significantly high in the cases amputated proximal to the MP joint. The opposition of reconstructed thumb to the other fingers was completely possible in all cases amputated distal to the MP joint. In 12 cases amputated proximal to the MP joint of the thumb, opposition was completely possible in 6 cases in which the iliac bone block was fixated in the position of $30^{\circ}$ flexion and $45^{\circ}$ internal rotation but in 6 cases in the fixation of $30^{\circ}$ flexion and $30^{\circ}$ internal rotation, the opposition of reconstructed thumb to the ring and little fingers were impossible in 5 cases and only to the little finger in 1 case. In this study, we concluded that even if amputation proximal to the MP joint, it is no more contraindication of the wrap-around free flap procedure for thumb reconstruction, however in these cases we recommend iliac bone block fixation in the position of $30^{\circ}$ flexion and $45^{\circ}$ infernal rotation for the better functional outcome.

• Journal of Chest Surgery
• /
• v.39 no.10 s.267
• /
• pp.765-769
• /
• 2006

Background: Nuss procedure is a minimally invasive technique for correcting the pectus excavatum. But there are some limitations of correcting the complex anomaly or grown-up patients. Material and Method: we retrospectively reviewed 135 consecutive patients who underwent repair of pectus excavatum by the Nuss procedure and its modifications between November 1999 and December 2004. We analyzed the computed tomography, age on operation, operative technique, and complications. Result: We operated 135 patients of pectus excavatum during 62 months. Total number of operations about Nuss procedure is 216, including bar removal procedure of 64 cases, redo Nuss procedures of 47 cases. We modified the point of bar insertion to the hinge point, made a shoulder in the bar to prevent a displacement. And then we changed the fixation material from Vicryl to steel wire. If the patients are old, we retract the sternum during bar rotation and fixation. Until 2002, the number of redo Nuss operations were 17, complications were 23. but, after modifications, the number of redo Nuss operation were 0, complications were 2. Conclusion: This result indicates that our modifications of Nuss operation is effective, and could decrease the number of redo Nuss operation and complications.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.sup2
• /
• pp.294-299
• /
• 2001

Objectives : CT-guided stereotactic evacuation for spontaneous intracerebral hemorrhage can minimize the brain damage and can be performed safely and simply under local anesthesia. But that procedure is time consuming and has a risk of rebleeding because of the stress during head pin fixation. So authors describe easy and precise guidelines for FHA of putaminal hemorrhage without stereotactic instrument. Methods and Materials : We analyzed the data of 298 patients who underwent CT-guided stereotactic aspiration of putaminal hematoma in our hospital between January 1990 and December 2000. We divided the patients into three groups according to the location of hematoma : anterior portion, middle portion and posterior portion of putamen. Total number of catheters inserted into the hematoma were 345 and there were with regard to the direction and depth of catheters. Results : Proposed guidelines of catheter insertion to putaminal hemorrhage in our institution. 1) hematoma at the anterior portion of putamen ; Direction of catheter was the midpupillary line of the eye and the point intersecting a line drawn from the burr hole to a point between external auditory meatus(EOM) and 1cm posterior to EOM. Depth of catheter was 6-6.5cm. 2) hematoma at the middle portion of putamen ; Direction of catheter was the midpupillary line of the the eye and the point intersecting a line drawn from the burr hole to a point between 1cm and 2cm posterior to EOM. Depth of catheter was 6.5-7cm. 3) hematoma at the posterior portion of putamen ; Direction of catheter was 15 degree laterally from the midpupillary line of the eye and the point intersecting a line drawn from the burr hole to a point between 2cm and 3cm posterior to EOM. Depth of catheter was 7-7.5cm. We have performed FHA of putaminal hemorrhage in 48 cases according to this guideline. All catheter were inserted exactly at the center of hematoma and average operation time was about 30 minutes. Conclusion : Our proposed guidelines for putaminal hemorrhage are considered to be safe and simple method with similar accuracy and rapid decompression compared with traditional stereotactic method. Main advantages of this technique were unnecessity of stereotactic frame application and less time requirement for hematoma removal.

• Journal of Korean Neurosurgical Society
• /
• v.56 no.1
• /
• pp.5-10
• /
• 2014

Objective : When the pedicle screw insertion technique is failed or not applicable, C7 intralaminar screw insertion method has been used as an alternative or salvage fixation method recently. However, profound understanding of anatomy is required for safe application of the bilaterally crossing laminar screw at C7 in clinic. In this cadaveric study, we evaluated the anatomic feasibility of the bilateral crossing intralaminar screw insertion and especially focused on determination of proper screw entry point. Methods : The C7 vertebrae from 18 adult specimens were studied. Morphometric measurements of the mid-laminar height, the minimum laminar thickness, the maximal screw length, and spino-laminar angle were performed and cross-sectioned vertically at the screw entry point (spino-laminar junction). The sectioned surface was equally divided into 3 parts and maximal thickness and surface area of the parts were measured. All measurements were obtained bilaterally. Results : The mean mid-laminar height was 13.7 mm, mean minimal laminar thickness was 6.6 mm, mean maximal screw length was 24.6 mm, and mean spinolaminar angle was $50.8{\pm}4.7^{\circ}$. Based on the measured laminar thickness, the feasibility of 3.5 mm diameter intralaminar screw application was 83.3% (30 sides laminae out of total 36) when assuming a tolerance of 1 mm on each side. Cross-sectional measurement results showed that the mean maximal thickness of upper, middle, and lower thirds was 5.0 mm, 7.5 mm, and 7.3 mm, respectively, and mean surface area for each part was $21.2mm^2$, $46.8mm^2$, and $34.7mm^2$, respectively. Fourteen (38.9%) sides of laminae would be feasible for 3.5 mm intralaminar screw insertion when upper thirds of C7 spino-laminar junction is the screw entry point. In case of middle and lower thirds of C7 spino-laminar junction, 32 (88.9%) and 28 (77.8%) sides of laminae were feasible for 3.5 mm screw insertion, respectively. Conclusion : The vertical cross-sectioned area of middle thirds at C7 spinolaminar junction was the largest area and 3.5 mm screw can be accommodated with 77.8 % of feasibility when lower thirds were the screw entry point. Thus, selection of middle and lower thirds for each side of screw entry point in spino-laminar junction would be the safest way to place bilateral crossing laminar screw within the entire lamina. This anatomic study result will help surgeons to place the screw safely and accurately.

• Radiation Oncology Journal
• /
• v.13 no.1
• /
• pp.87-94
• /
• 1995

Since March 1992, total 200 patients who visited our hospital as functional or organic lesions of central nervous system were treated by gamma knife stereotactic radiosurgery for 27 months. Thirty-nine patients of total cases was diagnosed as cerebral arteriovenous malformation. The rate of magnification on X-ray film was reduced by cutting fixation adaptor from 1.0 to below 1.45 times. In order to treat the deep- and lateral-seated cerebral arteriovenous malformation, we slightly modified the angiographic indicator, the commercial Leksell system, by cutting each inner sides about 5mm, We performed the more distinction of the scales by adapting 0.5mm or 1mm copper filter to angiographic indicator. The center point of indicator(X=100mm, Y=100mm, Z=100mm) is corrected by adjusting scales of X-, Y-, Z-axis to each inner 100 and outer 100 point within 1-2mm by repeated exposure of X-ray on films in trial-and-errors. We have developed the 'GKANGIO' programed as the Fortran-77 in Microvax - 3100, which can save treatment planning time and perform accurate pretreatment planning using the theoretical target metrix center. The theoretical description of the simplified method is presented for the reduction of experimental and numerical errors in treatment planning of radiosurgery.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.4
• /
• pp.308-316
• /
• 2018

Telescopic denture has advantages such as transfer the occlusal force to the long axis of the abutment, easiness of oral hygiene management, increase of retention and stability, splint effect due to secondary fixation between abutments and have been reported a higher success rates than conventional removable partial denture (RPD). However, there are disadvantages such as complex laboratory procedures, long treatment periods and high costs, and high incidence of complications. This clinical report describes two cases, a 4-point supported telescopic denture using telescopic crown and a 2-point supported telescopic denture using conical crown with functionally satisfactory results. Frequent complications of telescopic denture, which are reported in various literature were reviewed. Clinical and laboratory procedures were performed in consideration of complications that reported.

• The Korean Journal of Pain
• /
• v.29 no.3
• /
• pp.185-188
• /
• 2016

The $12^{th}$ rib syndrome is a disease that causes pain between the upper abdomen and the lower chest. It is assumed that the impinging on the nerves between the ribs causes pain in the lower chest, upper abdomen, and flank. A 74-year-old female patient visited a pain clinic complaining of pain in her back, and left chest wall at a 7 on the 0-10 Numeric Rating scale (NRS). She had a lateral fixation at T12-L2, 6 years earlier. After the operation, she had multiple osteoporotic compression fractures. When the spine was bent, the patient complained about a sharp pain in the left mid-axillary line and radiating pain toward the abdomen. On physical examination, the $10^{th}$ rib was not felt, and an image of the rib-cage confirmed that the left $10^{th}$ rib was severed. When applying pressure from the legs to the $9^{th}$ rib of the patient, pain was reproduced. Therefore, the patient was diagnosed with $9^{th}$ rib syndrome, and ultrasound-guided $9^{th}$ and $10^{th}$ intercostal nerve blocks were performed around the tips of the severed $10^{th}$ rib. In addition, local anesthetics with triamcinolone were administered into the muscles beneath the $9^{th}$ rib at the point of the greatest tenderness. The patient's pain was reduced to NRS 2 point. In this case, it is suspected that the patient had a partial resection of the left $10^{th}$ rib in the past, and subsequent compression fractures at T8 and T9 led to the deformation of the rib cage, causing the tip of the remaining $10^{th}$ rib to impinge on the $9^{th}$ intercostal nerves, causing pain.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.12 no.2
• /
• pp.9-20
• /
• 1990

A series of 19 cases with maxillary hyperplasia and mandibular retrognathia were operated on by simultaneous superior repositioning of the maxilla after Le Fort I osteotomy and anterior repositioning of the mandible after bilateral sagittal split ramus osteotomies with or without osteotomy of the inferior border of the mandible. These were evaluated by retrospective cephalometric and computer analysis for the longitudinal skeletal and dental changes for an average of 17.1 months after surgery. For stabilization of the osteotomized segments, the authors used wire osteosynthesis by means of bilateral infraorbital and zygomatic buttress suspension wire at the maxilla, and direct interosseous wire at the split segments of the mandibular rami. Results show generally good stability after simultaneous maxillary and mandibular surgery with wire osteosynthesis, and a minimal to moderate tendency toward skeletal and dental relapse. This article is a preliminary study to defy the efficiency of the wire osteosynthesis (wo)compared with rigid internal fixation (RIF) for simultaneous maxillary and mandibular surgery. 1. The vertical relapse rate of the A point after superior repositioning of the maxilla is 2.2%. 2. The horizontal relapse rate of the B point after advancement of the mandible is 18.3%. 3. The condyle is distracted inferiorly and slightly posteriorly at the immediate postoperative period. 4. At the long term follow up examination, the condyle presents tendency of return to the preoperative position. 5. Condylar segment angle is decreased at the immediate postoperative period, and at the long term follow up evaluation, the angle is increased. 6. Gonial angle is increased at the immediate postoperative period, and then is decreased at the long term follow up evaluation. 7. The dentition is satisfactory with acceptable movement at the long term follow up evaluation. 8. At the mandibular free body analysis, genioplasty shows good stability. 9. Wire osteosynthesis provides excellent stabilization for the simultaneous maxillary and mandibular surgery.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.4
• /
• pp.407-413
• /
• 2000

To evaluate the stability after orthognathic surgery in cleft lip and palate patients using rigid fixation, 20 patients underwent primary repair in childhood and later developed a jaw deformity and malocclusion that required orthognathic surgery were reviewed. Two groups, one of 10 patients performed Le Fort I osteotomy with sagittal split ramus osteotomy and one of 10 patients with sagittal split ramus osteotomy of the mandible, were evaluated. Each group had unilateral cleft only and all alveolar cleft sites had been grafted with autogeneous bone before the orthognathic surgery. The amount of surgical movement and relapse were compared in both horizontal and vertical dimensions. Two-jaw surgery group was more stable than mandibular surgery only group in mandibular position (p< 0.05). Statistically significant relapse was observed in mandibular skeletal point in mandibular surgery group (p<0.05). There was no statistically significant relapse in the skeletal point of two-jaw surgery group. However, the correlation between the horizontal surgical movement and relapse was detected (r = 0.88). This correlation indicates the need of overcorrection. The presence of scar tissues and relatively deficient maxillary bone could be attributed to this close relation between the surgical change and relapse.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.40 no.3
• /
• pp.103-110
• /
• 2014

Objectives: In this study, we assessed soft tissue asymmetry that occurred after open reduction of unilateral zygomaticomaxillary complex (ZMC) fractures. We proposed a simple method to assess soft tissue asymmetry after reduction surgery by evaluating the symmetry between the affected and the unaffected sides. The factors affecting soft tissue contour after surgery were also analyzed. Materials and Methods: Subjects included patients admitted to Wonkwang University Dental Hospital from 2008 to 2013. Cone-beam computed tomography (CBCT) images of asymmetric patients who underwent open reduction at least 3 months prior were compared with healthy patients. Results: The degree of asymmetry was measured in both the open reduction and control groups. Landmarks that showed a statistically significant difference between the two groups were zygion ($1.73{\pm}0.24mm$), bucclae ($1.08{\pm}0.26mm$), point of cheek ($2.05{\pm}0.33mm$) and frontozygomatic point ($1.30{\pm}0.31mm$). Conclusion: When compared with the normal group, asymmetry can occur in the affected side, which usually shows depression of overlying soft tissue and is statistically significantly different. Evaluation of soft tissue asymmetry with CBCT images after open reduction of ZMC fracture is useful.