• 대한가정학회지
• /
• 제39권8호
• /
• pp.137-154
• /
• 2001

This study was made to draft the tight fitting bodice pattern which horizontal and perpendicular stands are to be lightly set, with the consideration of characteristics of body shape in design of clothes. Measurement of body was conducted on 53 women in twenties, and observation was made on surface development pattern by adhesive tape addition method and gypsum method on three standard objects. In the study, bodice pattern was completed by using already made Somato- measurer, compared with existing bodice pattern, and the results are as follows. The result of the correlation analysis by body measurement shows that chest circumference has a relation to B$.$P-front neck point, side neck point, shoulder point, front interscye breadth point, and the item in spine scapulae point has relation to the item of back neck line, and front & back horizontal values. The degree of shoulder slant, width of armhole and of its depth, the amount of breast, back space, back length were shown to be directly measured from the body. In surface development pattern, tight-fit bodice pattern necessary to the breast volume and back space were shown to be investigated and these volume have to be given in setting up basic line for clothes design together with body measurement value. The result of sensory evaluation for appearance test on fitness shows higher value of research bodice including line of shoulder line, front and back interscye breadth, chest circumference, waist circumference, armhole circumference and of its depth, compared with the research bodice in most items. The result of this study is seen showing high effectiveness for the basic data to design the ready-made dress of high sensitivity of high value added tat.

• 디지털콘텐츠학회 논문지
• /
• 제19권1호
• /
• pp.141-147
• /
• 2018

본 연구는 기업에서 채용 전형 시 진행되는 인성시험 결과 데이터를 기반으로, 입사 3년 미만의 조기 퇴사자를 분석하였다. 예측 모형은 적합성 및 향후 활용성을 고려하여 제조(manufacture)직군과 R&D직군 2개 그룹으로 구분하여 분석하였으며, 독립변수 선택은 전진(stepwise)선택법에 따라 직군별로 유의미한 독립변수를 선택하였다. 예측 모형은 지도학습(supervised learning) 방법 중 로지스틱 회귀분석 알고리즘을 선택하였으며, 과잉적합(overfitting) 또는 과소적합(underfitting)을 방지하고자 교차 검증(cross validation)을 통해 예측 모형을 훈련시켰다. 혼동행렬(confusion matrix)을 통해 2개 그룹의 정확도(accuracy)를 확인하였으며, 조기 퇴직에 가장 영향을 많이 미치는 요인으로 제조직군에서는 '몰입', R&D직군에서는 '반사회성' 항목으로 확인되었다. 기존 퇴직 관련 연구는 설문 방식으로 데이터를 수집하고, 퇴직과 관련성이 높은 요인을 확인하는데 집중하였다면, 본 연구는 채용 전형 시 진행되는 인성 결과 분석을 통해 향후에도 지속 가능한 조기 퇴직 예측 모형을 제시했다는 면에서 의의를 갖는다.

• 재활복지공학회논문지
• /
• 제1권1호
• /
• pp.21-28
• /
• 2007

대부분의 보청기에서는 난청인의 청력 손실을 보상하기 위해 음성 증폭 알고리즘과 잡음 및 피드백을 제거하기 위한 알고리즘 등을 사용하고 있고, 음성의 인지율을 높이기 위해서 음성의 대비를 강조하는 알고리즘을 사용한다. 음성 대비 강조 알고리즘 사용 시 과도한 대비증폭에 의해서 포먼트(formant) 사이에서 마스킹 현상이 발생할 수 있다. 마스킹 현상을 확인하기 위해서 6가지의 주관적인 평가와 1가지의 객관적인 평가를 수행하였다. 주관적인 평가로는 순음 검사, 어음 청취 역치 검사, 낱말 분별력 검사, 순음 마스킹 검사, 포먼트 순음 마스킹 검사, 어음 마스킹 검사로 이루어져있고 객관적인 평가를 위해서 LLR(log likelihood ratio)을 도입하였다. 정상 청각 피험자와 난청 피험자의 결과로 미루어 볼 때, 난청 피험자가 마스킹이 잘 일어난다는 것을 볼 수 있었고, 어음을 이용한 마스킹 검사에서는 마스킹에 의해서 난청 피험자에서 어음에 대한 인지율이 떨어지는 결과를 볼 수 있다. 이러한 현상은 포먼트 향상에 의한 왜곡 때문이 아닌 마스킹 때문이다. 그러므로 마스킹 효과의 특성을 조사하여, 보청기 적합 시, 이러한 마스킹 특성을 고려하는 것이 필요하다.

• 한국의류학회지
• /
• 제31권4호
• /
• pp.633-645
• /
• 2007

The purpose of this study is to develop brassiere patterns which are both fitting and functional for women aged 19 to 24(the 1924 generation). We suggested a 'size chart for body measurements' for constructing basic brassiere patterns with six sizes of '70, 75', 'AA, A, B cups', which are used most frequently by the 1924 generation consumers. The scope of research was in reference to the statistical analysis results of the Size Korea(2004) body measurements and the results of the data from the preceding research. The 'drafting method for constructing basic brassiere patterns for the 1924 generation consumers' was completed by selecting a total of 18 subjects, 3 for each six sizes in the scope of research, and three wearing tests were carried out with the subjects. We compiled one brassiere pattern in six sizes obtained with the drafting method of constructing a basic brassiere pattern on another by block pattern in order to observe the phase of change in dimensions and shapes of paper pattern. The result was converted into the variations of a x-axis and a y-axis, and we suggested 'Size Grading Rule' and 'Cup Grading Rule' for the basic brassiere patterns. As the results of the wearing evaluation of the basic brassieres and measuring the variation in body dimensions by wearing brassieres, the dimensions and shapes of the basic brassieres suggested in this research proved to be fitting and to have a wearing effect that brings together and supports the breasts.

• Journal of Preventive Medicine and Public Health
• /
• 제35권2호
• /
• pp.136-140
• /
• 2002

Objectives : A common problem with analyzing survey data involves incomplete data with either a nonresponse or missing data. The mail questionnaire survey conducted for collecting lifestyle variables on the members of the Korean Elderly Phamacoepidemiologic Cohort(KEPEC) in 1996 contains some nonresponse or missing data. The proper statistical method was applied to evaluate the missing pattern of a specific KEPEC data, which had no missing data in the independent variable and missing data in the response variable, BMI. Methods : The number of study subjects was 8,689 elderly people. Initially, the BMI and significant variables that influenced the BMI were categorized. After fitting the log-linear model, the probabilities of the people on each category were estimated. The EM algorithm was implemented using a log-linear model to determine the missing mechanism causing the nonresponse. Results : Age, smoking status, and a preference of spicy hot food were chosen as variables that influenced the BMI. As a result of fitting the nonignorable and ignorable nonresponse log-linear model considering these variables, the difference in the deviance in these two models was 0.0034(df=1). Conclusion : There is a lot of risk if an inference regarding the variables and large samples is made without considering the pattern of missing data. On the basis of these results, the missing data occurring in the BMI is the ignorable nonresponse. Therefore, when analyzing the BMI in KEPEC data, the inference can be made about the data without considering the missing data.

• The Journal of Advanced Prosthodontics
• /
• 제11권2호
• /
• pp.105-111
• /
• 2019

PURPOSE. Limited data is available regarding the differences for possible microleakage problems and fitting accuracy of zirconia versus titanium abutments with various connection designs. The purpose of this in vitro study was to investigate the effect of connection design and abutment material on the sealing capability and fitting accuracy of abutments. MATERIALS AND METHODS. A total of 42 abutments with different connection designs [internal conical (IC), internal tri-channel (IT), and external hexagonal (EH)] and abutment materials [titanium (Ti) and zirconia (Zr)] were evaluated. The inner parts of implants were inoculated with $0.7{\mu}L$ of polymicrobial culture (P. gingivalis, T. forsythia, T. denticola and F. nucleatum) and connected with their respective abutments under sterile conditions. The penetration of bacteria into the surrounding media was assessed by the visual evaluation of turbidity at each time point and the number of colony forming units (CFUs) was counted. The marginal gap at the implant- abutment interface (IAI) was measured by scanning electron microscope. The data sets were statistically analyzed using Kruskal-Wallis followed by Mann-Whitney U tests with the Bonferroni-Holm correction (${\alpha}=.05$). RESULTS. Statistically significant difference was found among the groups based on the results of leaked colonies (P<.05). The EH-Ti group characterized by an external hexagonal connection were less resistant to bacterial leakage than the groups EH-Zr, IT-Zr, IT-Ti, IC-Zr, and IC-Ti (P<.05). The marginal misfit (in ${\mu}m$) of the groups were in the range of 2.7-4.0 (IC-Zr), 1.8-5.3 (IC-Ti), 6.5-17.1 (IT-Zr), 5.4-12.0 (IT-Ti), 16.8-22.7 (EH-Zr), and 10.3-15.4 (EH-Ti). CONCLUSION. The sealing capability and marginal fit of abutments were affected by the type of abutment material and connection design.

• 한국의류산업학회지
• /
• 제6권3호
• /
• pp.367-376
• /
• 2004

The purpose of this study is to analyze the image evaluation and the preference of tailored jacket focused on the collar's figure according to the body type and the degree of satisfaction with their body of middle-aged women. For this study, twenty seven different types of tailored jacket were designed with some variation of their silhouette, the length and the collar's figure on three hundred and twenty three middle-aged women ranging from 35 to 50 years old. There was a significant difference in the image evaluation and the preference of tailored jacket according to the body type of middleaged women. The women of the type 1 evaluated that portrait lapel collar were the most fascinating, elegant and active, tender and they preferred that style. The women of the type 2 evaluated that breast lapel collar were the most fascinating, elegant and active, tender and they preferred that style. The women of the type 3 evaluated that breast lapel collar were the most fascinating, elegant and active, tender and they preferred that style. The women of the type 4 evaluated that waist lapel collar were the most fascinating, elegant and active, tender and they preferred that style. There was a meaningful difference in the image evaluation and the preference of tailored jacket according to the degree of satisfaction with their bodies. As satisfied with their face size, they thought breast/portrait lapel collar were more attractive, graceful and active, soft and they preferred that style. As satisfied with weight they regarded portrait lapel collar as more attrative, graceful and active, soft and they preferred that style. In this study we found that the middle-aged women evaluated the tailored jacket which was looking esthetic and fitting their body types, as the most attrative, elegant, active, and tender clothing and they prefered that kind of tailored jacket.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 1998년도 The 12th Asia Quality Management Symposium* Total Quality Management for Restoring Competitiveness
• /
• pp.133-142
• /
• 1998

This paper is a brief review of the different procedures that are available for fitting theoretical distributions to data. The use of each technique is illustrated by reference to a distribution system which including the Pearson, Poission approximation of Gamma distribution and Burr functions. These functions can be used to calculate percent out of specification. Therefore, in this paper a new methods for estimating a measure of non-normal process capability for Gamma distributed variable data proposed using the percentage nonconforming. Process capability indices combines with the percentage nonconforming information can be used to evaluate more accurately process capability.

• 제어로봇시스템학회논문지
• /
• 제8권9호
• /
• pp.812-817
• /
• 2002

This paper presents a development of high accuracy aligner and describes a method to find the orientation of a substantially circular disk shaped wafer with at least one flat region on an edge thereof. In the developed system, the wafer is spun one 360 degree turn on a chuck and the edge position is measured by a linear array to obtain a set of data points at various wafer orientation. The rotation axis may differ from wafer center by an unknown eccentricity. The flat angle is found by fitting a cosine curve to the actual data to obtain a deviation. The maximum deviation is then corrected for errors due to a finite number of data points and wafer eccentricity by calculating an adjustment angle from data points on the wafer fiat. After determining the flat angle the wafer is spun to the desired orientation. The wafer eccentricity can be calculated from four of the data points located away from the flat edge region. and the wafer is then centered.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.49-54
• /
• 2004

Several cell models, so-called local approach, have been proposed as engineering approaches to numerically simulate ductile fracture characteristics. In this paper, two- and three-dimensional finite element analyses incorporating both modified GTN and Rousselier models were carried out. Smooth and notched bars and CT25 specimens were assessed for StE460 and DIN22NiMoCr37 materials which were quoted from previous researches. Micro-mechanical parameters used in the assessment were established by fitting the numerical results with the experiments, and J-R curves derived from the simulations were found to be in good agreement with the corresponding experimental results.