• Fashion & Textile Research Journal
• /
• v.14 no.3
• /
• pp.454-464
• /
• 2012

In this study, fitness tests for slacks were divided into shape fitness test and motion fitness test, and the fitness test conditions for slacks were designed as the first step for standardization of measuring scales. Shape fitness test consisted of analyzing the parameters of appearance sensory tests as described in preceding studies, performing a simulated appearance sensory test, collecting and considering apparel experts' opinions about the test parameters, and establishing test conditions in terms of test regions, descriptions and faces. For the regions of the abdomen, hip, crotch, thighs, and knees, the parameter of unnecessary wrinkle/stretch was observed from the anterior and posterior body, and then evaluated; for waist, hip, crotch, knee and hem circumference, the parameters of ease and horizontality were observed from the anterior body and posterior body followed by evaluation; and, at the levels of waist, hip, crotch, knee and hem circumference, the division of the lateral line were observed from the lateral body followed by evaluation. Motion fitness test was composed of reviewing and analyzing comparatively the methods of motion fitness tests as mentioned in preceding studies, and establishing test conditions in terms of test motions and test regions. For each of the waist, abdomen, hip, crotch, and knees, wear sensation was tested in the positions as follows: upright standing, moderate walking, chairsitting, bending forward to the maximum, and kneeling down, provided that as the measured points of garment pressure, anterior waist, abdominal protrusion, buttock protrusion, crotch, and midpatella were set and tested.

• Journal of the Korean Home Economics Association
• /
• v.41 no.3
• /
• pp.1-15
• /
• 2003

This study was conducted to analyze the actual wearing conditions and body fit preferences of the middle-aged women's ready-to-wear lower body clothing. The aim was also to analyze lower body recognition, lower body satisfaction, fit preferences and size satisfaction according to age and degree of girth size. A questionnaire was developed and administered to 300 middle-aged women aged 34 to 59. Statistical tests such as descriptive analysis, crosstabs, and X²-tests were conducted to analyze the data and ascertain the differences between the ages. Lower body satisfaction and recognition were compared by T-test. Also, Anova was used to analyze lower body recognition, satisfaction, fit preferences, and size satisfaction according to age and degrees of girth size. The results indicated that women aged 50 to 59 were more dissatisfied with the ready-to-wear sizing system and because of their body shapes had changed, their need for a larger size range system had also increased. Moreover, the element that most affected their purchase of ready-to-wear lower body clothing was the design followed by the size. The women, especially of the ages 50 to 59, showed a tendency to he dissatisfied with their lower bodies and they recognized that their lower bodies had thickened compared to women aged 34 to 39 and 40 to 49. Analysis of body satisfaction, recognition, and fit preference according to girth size showed that the group of larger girth size recognized that their lower bodies were thicker and were more dissatisfied and preferred looser fittings than the groups of smaller women.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.2
• /
• pp.271-283
• /
• 2008

The purpose of this study is to provide information on how to improving wearing sensation and fit of boots-cut jean through analysis of the actual wearing conditions and dissatisfaction. In order to compile the information about dissatisfaction with the appropriateness of the fit of boots-cut jean, a questionnaire was administered to 150 females(between the ages of 20 and 39) living in Gwang-ju, analyzed using the SPSS WIN 12.0 program. Also, 6 blue jean manufactures were investigated, the study method was a interview about company present status, sizing system and pattern of boots-cut jean. The result of this study were as follow: 1. In wearing conditions, the 20's(51.6%) to 30's(69.1%) is found the best preferred jean is boots-cut style. The reason why consumers prefer boots-cut jeans with wearing fit does to seem charming bodyline of the adult female. 2. Body type groups by drop was classified with the usual waist, the thick waist, the thin waist. The differences among age groups, body type and so on were compared using the chi-square test. Dissatisfaction of the fit of the thick waist and the thin waist was higher than the usual waist. 3. Research on the production sizing system of 6 blue jean brands showed the total sizing system of each manufacture were $3{\sim}9$, they were reflected the sizing system of the korean Industrial Standards(KS K 0051). Therefore, it is considered necessary for boots-cut jeans pattern and sizing system for Korean consumer's body shape.

• Research in Community and Public Health Nursing
• /
• v.17 no.2
• /
• pp.153-165
• /
• 2006

Purpose: The purpose of this study was to develop and test a structural model on cardiovascular disease risk factors among male manufacturing workers. Methods: Data were collected through questionnaires and health exams from 201 workers in a local electronic company during September 2004. Data analysis was done with SAS 9.1 for descriptive statistics and PC-LISREL 8.54 for covariance structural analysis Results: The overall fit of the hypothetical model to the data was moderate, it was modified by deleting five paths. The modified model had a better fit to the data($x^2=504.23$(p<001, df: 180), $x^2/df=2.80$, GFI=.95, RMR=.07, NFI=.90, PGFI=.64). Health behaviors and psychosocial distress were found to have significant direct effects on the cardiovascular disease risk factors. Self-concept had direct effect on psychosocial distress or health behaviors. Self-concept, work environment, and work condition had direct effect on social support. Work environment had indirect effect on psychosocial distress. Social support had indirect effect on health behaviors. But work environment and work condition were found to have little direct effect on health behaviors, psychosocial distress or cardiovascular disease risk factors. Conclusion: A cardiovascular health promotion program should therefore include psycho-social factors as well as health behavioral determinants in worksites.

• Korean Journal of Audiology
• /
• v.25 no.2
• /
• pp.72-79
• /
• 2021

Background and Objectives: The speech-in-noise test is typically performed using an audiometer. The results of the digit-in-noise recognition (DIN) test may be influenced by the flat frequency response of free-field audiometry and frequency of the hearing aid fit based on fitting rationale. This study aims to investigate the DIN test in unaided and aided conditions. Subjects and Methods: Thirty four adults with moderate and severe sensorineural hearing loss (SNHL) participated in the study. The signal-to-noise ratio (SNR) for 50% of the DIN test was obtained in the following two conditions: 1) the unaided condition, performed using an audiometer in a free field; and 2) aided condition, performed using a hearing aid with an unvented individual earmold that was fitted based on NAL-NL2. Results: There was a statistically significant elevation in the mean SNR for the severe SNHL group in both test conditions when compared with that of the moderate SNHL group. In both groups, the SNR for the aided condition was significantly lower than that of the unaided condition. Conclusions: Speech recognition in hearing-impaired patients can be realized by fitting hearing aids based on evidence-based fitting rationale rather than by measuring it using free-field audiometry measurement that is utilized in a routine clinic setup.

• Transactions of Materials Processing
• /
• v.32 no.6
• /
• pp.352-359
• /
• 2023

Recently, independent suspension systems have been applied not only to passenger cars but also to large commercial vehicles. Therefore, the need for research to domestically produce such independent suspensions for large commercial vehicles is gradually increasing. In this paper, we conducted research on the manufacturing technology of the relay lever, which are integral components of independent suspension systems for large commercial vehicles. Our goal was to reduce the flash volume generated during the forging process. The shape variables of the initial billet were adjusted to find proper forming conditions that could minimize flash volume while performing product forming smoothly. Shape variables were set as input variables and the flash volume was set as an output variable, and simulations were carried out to analytically predict the volume of the flash area for each variable condition. Based on the data obtained through numerical simulations, a regression model and an artificial neural network model were used to develop a prediction model that can easily predict the flash volume for variable conditions. For the corresponding prediction model, a goodness of-fit test was performed to confirm a high level of fit. By comparing and analyzing the two prediction models, the high level of fit of the ANN model was confirmed.

• Computers and Concrete
• /
• v.25 no.5
• /
• pp.433-445
• /
• 2020

A method is proposed in this paper to estimate the workability of self-compacting concrete (SCC) in different mixing conditions with different mixers and mixing volumes by recording the mixing process based on deep learning (DL). The SCC mixing videos were transformed into a series of image sequences to fit the DL model to predict the SF and VF values of SCC, with four groups in total and approximately thirty thousand image sequence samples. The workability of three groups SCC whose mixing conditions were learned by the DL model, was estimated. One additionally collected group of the SCC whose mixing condition was not learned, was also predicted. The results indicate that whether the SCC mixing condition is included in the training set and learned by the model, the trained model can estimate SCC with different workability effectively at the same time. Our goal to estimate SCC workability in different mixing conditions is achieved.

• Journal of Applied Reliability
• /
• v.14 no.2
• /
• pp.129-136
• /
• 2014

Reliability test is focusing to detect the unexpected reliability failure and solve them for the high quality of products. The test data should be used to assess and project the current level of interesting product reliability and so it is very important to have the accurately assessing methodology with test data. There are two type of trend for test data as constant and changing one during testing and this paper shows the difference in the assessing results of these two cases. There is less information how to define the existence of reliability growth rate changing and calculate the parameters of the reliability growth models to make an accurate assessment with such condition, so i established the process and mathematical model to calculate the parameters at such condition to make reliability growth curve with high Goodness of Fit. I validated the new method with the data made from Monte Carlo Simulation and case from Demko (1993). Even the assessed result with the new methodology may be different with the case by case because of very diversity in test condition and testing product quality, but the process and method founded in this research can be applied to any case using Duane and AMSAA model for their test data assessment. I also present the evaluation method to see the effectiveness with new one which is a conventional knowledge and not popular to use, so it is possible to compare the results with the newly presented and conventional method for better business decision.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.7
• /
• pp.99-105
• /
• 2004

When a saturated clay is sampled from a borehole in an undisturbed manner, the exerted negative pore water pressure restricts the volume expansion. The vertical and horizontal stresses to which the clay was subjected in the ground are smaller and larger than this isotropically confining stress equivalent to the mean principal stress in the ground, respectively. Therefore the sample expands vertically and shrinks laterally under an undrained condition. In the ordinary consolidation test, the sample thus deformed is trimmed to fit the inside of the consolidometer ring. Thus, the specimen generates larger consolidation displacement due to confining larger horizontal stress when in-situ effective pressure is loaded. The specimen does not reproduce the in-situ consolidation behavior, In this paper, considering sample deformation, the test specimen is made to expand laterally to fit the inside of the ring in the undrained manner when the in-situ effective pressure is loaded. And applicability of this proposed test procedure was verified; results from the conventional consolidation test procedure are also discussed.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2003.10a
• /
• pp.407-410
• /
• 2003

The actual quality of the concrete in the structure for Irrigation may differ from that represented by the cylinders because the age, consolidation, or curing of the in-place material may not be well represented by the standard test specimens. The objective of this paper is to offer a base data of specification is the best fit the ready-mixed concrete strength to the specified, and to address this deficiency, so that the strength information of the concrete in the structure for Irrigation can be rationally accounted for in the assessment of the quality condition of this. The strength of concrete in the hydraulic structures is checked using strength of core obtained from that, and 28-day-old cylinder strength is analyzed using cylinder data of the ready-mixed concrete.