• Geomechanics and Engineering
• /
• v.33 no.2
• /
• pp.211-219
• /
• 2023

This study analyzes the changes in the physical properties of grout by irradiating it with ultrasonic energy and assesses the injectability of the grout into deep rock fractures. The materials used in the research are OPC (Ordinary Portland Cement) and MC (Micro Cement), and are irradiated depending on the water/cement ratio. After irradiating the grout with ultrasonic energy, viscosity, compressive strength, and particle size are analyzed, and the results of the particle size analysis were applied to Nick Barton's theory to evaluate the injectability of the grout into deep rock fractures under those conditions. It was found that the viscosity of the grout decreased after ultrasonic wave irradiation, and the rate of viscosity reduction tended to decrease as the water/cement ratio increased. Additionally, an increase in compressive strength and a decrease in particle size were observed, indicating that the grout irradiated with ultrasonic energy was more effective for injection into rock fractures.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.3
• /
• pp.345-351
• /
• 2010

The purpose of this study is to compare microleakage and penetration depths of sealants applied in carious and sound fissures. Extracted premolars(n=80) were divided into 4 groups according to caries status. 1; sound, 2; stained, 3; initial caries, 4; enamel caries. Sealants were applied to the occlusal groove as per manufacturers' instructions, and specimens were thermocycled, stained, sectioned, and examined for microleakage and penetration ability. The results of the present study are as follow: 1. It showed significantly higher microleakage scores in group I than group Two, Three, Four(p<0.05), but no significant difference was found between group Two, Three, and IV(p>0.05). 2. It showed significantly higher penetration scores in group Four (p<0.05), followed by group One, Two, Three, but no significant difference was found between group One, Two, and Three(p>0.05). Based on the results of present study, when the borders of the fissure sealant are on carious enamel, a significantly higher microleakage must be expected. It is considered that depth of enamel caries in the fissure should be taken into account when applying a fissure sealant.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.45 no.1
• /
• pp.90-97
• /
• 2018

The purpose of this study was to evaluate the effect of fissurotomy on the penetration and microleakage of flowable resins for carious fissures. A total of 250 extracted premolars with early fissure caries were selected and divided into five groups according to the fissurotomy; no fissurotomy (n = 50), fissurotomy with $Fissurotomy^{(R)}$ original bur (n = 50), fissurotomy with $Fissurotomy^{(R)}$ Miro NTF bur (n = 50), fissurotomy with SF104R tapered diamond bur (n = 50), fissurotomy with 1/2 round carbide bur (n = 50). Two types of flowable resins ($UniFil^{(R)}Flow$, $Filtek^{(R)}Flow$) were used as sealing materials. All samples were sectioned and observed using a stereoscopic microscope after thermocycling and immersing in methylene blue solution. The adaptation of flowable resin to the fissure wall was observed using scanning electron microscopy. The penetration of flowable resin into the carious fissure was significantly increased by fissurotomy, which also decreased microleakage. Fissure preparation using different burs showed a significantly different in penetration, but did not show any difference in microleakage. $Unifil^{(R)}Flow$ showed better penetration than $Filtek^{(R)}Flow$, but there was no significant difference in microleakage. Fissurotomy can be used to increase the penetration of flowable resin into carious fissures and decrease microleakage.

• Journal of Conservation Science
• /
• v.28 no.1
• /
• pp.39-52
• /
• 2012

The Usuki Stone Buddha Statues in Oita are consisted of 60 Buddhas which represent of Japan carved on the rock-cliff in the 12 to 14th centuries. The basement rock of the statues is dark gray welded lapilli tuff that containing the Aso-4 pyroclastic rock group. Deterioration maps for the Hoki I and the Furuzono Buddha Statues group show multi-directional fissures on the Cakra, and sheeting-off zone at the margin of uprising water. Deterioration rate of the Hoki I group was calculated fissure about 121 in number, 19% of sheeting-off zone and 51% of biological weathering in surface of area. And the Furuzono group was also evaluated as about 48 of fissures in number, 24% of sheeting-off zone and 41% biological weathering. The slope stability assessment results, the Hoki I developed discontinuous planes has possibility of planar, toppling and wedge failures in all caves. Ultrasonic velocity of the Aizen-myooh (basement rock) ranges from 1,520 to 2,794 (average 2,298m/s). And pedestal of Amita-yeorae which has been replaced by new fresh rock is measured as 3,242 to 4,141 (average 3,813m/s). Therefore, we establish of planing conservation treatment and reinforcement methods to fissure, cavity, sheeting-off zone in the Buddha surface.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.2
• /
• pp.244-252
• /
• 2006

The aims of this study were to determine if flowable composites can be used as pit and fissure sealants without bonding agents. Three flowable composites(Filtek Flow, Tetric Flow, Charmfil Flow) and a filled sealant (Ultraseal XT plus) were used. The pattern of resin tag formation in the four sealant materials were compared using SEM. For the microleakage assessment, 54 extracted human premolar teeth were randomly divided into 3 groups containing 18 premolars each. In each group, a conventional filled sealant and one of the three flowable composites were applied to occlusal fissures. The teeth were thermocycled(1200 cycles between $5^{\circ}{\pm}2^{\circ}C\;and\;55^{\circ}{\pm}2^{\circ}C$ with a dwell time of 30 seconds) and immersed in a 1% methylene blue solution for 48 hours. Each tooth was sectioned and examined to determine the extent of dye penetration. Three flowable composites and a filed sealant showed a similar resin tag formation pattern. The three flowable composites showed significantly more microleakage in each group than the filled sealant. The level of microleakage was similar in the three flowable composites. Flowable composites are not recommended as pit and fissure sealants because more microleakage can occur even when occlural fissures are mechanically widened.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.85-92
• /
• 2003

Generally, ordinary portland cement(OPC) is widely used for grouting to reduce permeability of ground under the foundations of structures. But, it is hard to be injected into the microscopic voids, fissures and crevices in soil or rock formation for the OPC material. Therefore new method what is called MSG(Micro Silica Grouting) has been developed recently to improve the weak point of the OPC material. In this case study, in order to verify performance of the MSG's water cut-off, trial injections were performed in rear of CIP(Cast in Place Pile) on the site A(weathered soil) and B(alluvial soil) that are constructed for the subway No. 9 nowadays. To take the proper grouting method of the MSG in the trial injecting, the injections are carried out for grouting types(constant pressure or fixed Quantity) and grouting methods(1.5shot or 2.0shot) and to confirm the effects of water cut-off and the injection range of the MSG, the tests of permeability and indicator(phenolphthalein) response were performed before and after the injection. Through the tests results, we could affirm the effects of water cut-off of the MSG and the injection range for the weathered and alluvial soil layers near the Han River. Finally we could make sure the application of the MSG method in actual construction under the layers.

• Structural Engineering and Mechanics
• /
• v.41 no.2
• /
• pp.231-242
• /
• 2012

This research work aims to develop an optimal design using Finite Element (FE) and Genetic Algorithm (GA) methods to replace the traditional concrete and timber material by a Synthetic Polyurethane fibre glass composite material in railway sleepers. The conventional timber railway sleeper technology is associated with several technical problems related to its durability and ability to resist cutting and abrading action of the bearing plate. The use of pre-stress concrete sleeper in railway industry has many disadvantages related to the concrete material behaviour to resist dynamic stress that may lead to a significant mechanical damage with feasible fissures and cracks. Scientific researchers have recently developed a new composite material such as Glass Fibre Reinforced Polyurethane (GFRP) foam to replace the conventional one. The mechanical properties of these materials are reliable enough to help solving structural problems such as durability, light weight, long life span (50-60 years), less water absorption, provide electric insulation, excellent resistance of fatigue and ability to recycle. This paper suggests appropriate sleeper design to reduce the volume of the material. The design optimization shows that the sleeper length is more sensitive to the loading type than the other parameters.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.6
• /
• pp.1190-1194
• /
• 2000

과열 수증기 공정처리 효과가 현미의 수화 및 조직특성에 미치는 영향을 조사하기 위하여 현미(동진)를 과열수증기의 압력이 $1kg_{f}/$\textrm{cm}^2$$로 유지되는 상태에서 수증기의 온도를 127, 150, 16$0^{\circ}C$로 달리하면서 과열 수증기 처리를 하였다. 수분흡수속도는 수침온도(60~8$0^{\circ}C$)에 따라서 현미와 백미가 각각 0.03569~0.1049 $cm/min^{-1/2}$와 0.03474~0/1618 $cm/min^{-1/2}$의 범위를 보였다. 현미와 백미의 활성화에너지는 각각 6.98 및 9.59 cal/mole을 나타내어 열수화 특성이 다름을 보였다. 한편, 과열 수증기 처리현미의 경우 $65^{\circ}C$에서의 확산계수는 18.96$\times$$10^{-5}$$\textrm{cm}^2$/min)와 처리하지 않은 현미(22.28$\times$$10^{-5}$$\textrm{cm}^2$/min)의 중간 값을 나타내었다. 과열 수증기처리 후 현미의 표면조직은 균열이 발생하였는데, 수증기 온도가 높을수록 균열의 정도가 컸다. 이상과 같은 수증기 처리는 현미 강층의 구조를 변화시킬 뿐만 아니라, 내부 전분층의 부분적 균열에도 효과적으로 작용하는 결과를 보인 것으로 예측된다.

• Economic and Environmental Geology
• /
• v.3 no.3
• /
• pp.177-186
• /
• 1970

Bupyong lead-silver mine is located at outskirt of Inchon, a harbor city on the Yellow Sea about 40 km due west of Seoul. The geology of the area is composed of gneisses of pre-Cambrian age, rhyolite of Jurassic to Cretaceous age which extruded over the gneisses and late Cretaceous granite. Small diabasic dike is observed only in the underground. The contact plane between overlying rhyolite and underlain gneiss is sinuous and generally pitches about $30^{\circ}{\sim}40^{\circ}$ toward east. Conjugate joints and fissures are well developed in the rhyolite striking generally north-southward. Three ore bodies are being exploited and three more are under prospecting. These ore bodies range from few tons of hundred thousand to million tons in reserve. These ore bodies occur exclusively in the rhyolite along joints as network and/or desseminated type. The lower limit of ore bodies is always delineated at about 20~30m above the gneiss which might be indicative of ore genesis that has not been clearly explained so far. Two hypothesis on ore genesis could, however, be considered: firstly lithologic difference in the rhyolite might be a manifestation of different flows along which ore solution ascended and replaced along joints; secondly diabasic dike has acted as ore bringer since the dike contains considerable amount of silver, lead and zine. Ore minerals are galena and native silver accompanied by pyrite, argentite, pyragyrite and magnetite. It is believed that pyritization took place in advance to main mineralization, and ore deposit is classified as meso- to epi-thermal type.

• Journal of Korean Neurosurgical Society
• /
• v.55 no.5
• /
• pp.273-276
• /
• 2014

Aneurysmal subarachnoid hemorrhage (SAH) during pregnancy is quite rare, however it has a high maternal mortality rate. A pregnant woman in the 16th gestational week was admitted to our hospital with a drowsy level of consciousness. A brain magnetic resonance (MR) image showed hemorrhage on the prepontine cistern, and both sylvian fissures, and MR angiography and cerebral digital subtraction angiography demonstrated an aneurysm at the left posterior inferior cerebellar artery (PICA). We performed endovascular coil embolization attempting to minimize radiation exposure. She was discharged with no neurologic deficit and delivered a healthy baby by cesarean section at the 38th week of gestation. This case study reported the shortest gestational period and this is the first report on an aneurysmal rupture arising from PICA which was treated using an endovascular method. Using an appropriate technique for reduced radiation exposure to the fetus and limited alterations in maternal-fetal physiology, endovascular coil embolization could guarantee good results in treatment of aneurysmal SAH in pregnant women.