• 유기물자원화
• /
• 제24권1호
• /
• pp.21-29
• /
• 2016

혐기성 소화의 주요 조건 중 하나인 C/N비의 경우 하수슬러지는 5.40으로 낮게 나타난 반면 음폐수(Food waste leachate)는 21.84로 높게 나타났다. C/N비가 낮을 경우 혐기성소화의 저해 요인으로 작용될 수 있기 때문에 음폐수의 높은 유기물 농도 및 C/N 비를 활용하여 메탄가스 발생량 증가시킬 수 있었다. Tchobanoglous이 제안한 이론적 메탄가스 발생량 예측수식을 적용하여 메탄 및 바이오가스 발생량을 산정한 결과 하수슬러지 단일 혐기소화의 경우 $305.6mL{\cdot}CH_4/g{\cdot}VS$, $689.4mL{\cdot}CH_4/g{\cdot}VS$의 메탄, 바이오가스가 발생하였고 음폐수 : 하수슬러지를 1:9로 혼합한 시료는 약 $322mL{\cdot}CH_4/g{\cdot}VS$, 3:7시료에서는 약 $354mL{\cdot}CH_4/g{\cdot}VS$, 5:5시료에서는 약 $386mL{\cdot}CH_4/g{\cdot}VS$의 메탄가스가 발생하는 것으로 분석되었다. BMP 실험 결과 1:9, 3:7, 5:5 비율로 병합 처리한 경우 각각 약 233, 298, $344mL{\cdot}CH_4/g{\cdot}VS$의 메탄가스가 발생하였다. 따라서 음폐수의 혼합비율이 높아질수록 메탄가스 발생량은 증가하였고 하수슬러지와 음폐수의 혼합비율에 따른 병합처리 시 하수슬러지 단독처리에 비해 다량의 메탄가스가 발생되었다. BMP 실험을 통해 생산된 메탄가스의 누적생산 곡선을 Modified Gompertz model과 first order kinetic model에 적용하여 추정한 결과, 메탄생성량은 Modified Gompertz model에서는 238.5, 302.3, $353.6mL/g{\cdot}VS$ 발생하였고 first order kinetic model에서는 242.8, 312.5, $365.5mL/g{\cdot}VS$로 음폐수와의 혼합비율이 증가할수록 높게 나타났으며, 최대 메탄생성속도의 경우 3:7비율에서 $48.2mL/gVS{\cdot}day$로 최대 메탄생성 속도를 보였다. first order kinetic model의 1차 반응속도상수 k값은 1:9, 3:7, 5:5 비율에 따라 0.32, 0.22, $0.08day^{-1}$ 나타났다. 1차 반응속도 상수의 경우 음폐수의 혼합비율이 낮을수록 높게 나타났다. Modified Gompertz와 first order kinetic model 모두 실험결과를 잘 모사하였으며, 실험결과와 모의결과의 적합도를 나타내는 상관계수($R^2$)의 경우 0.92~0.98으로 높은 상관성을 나타내었다.

• Advances in environmental research
• /
• 제3권1호
• /
• pp.29-43
• /
• 2014

Pharmaceutical wastewater effluents are well known for their difficult elimination by traditional biotreatment methods and their important contribution to environmental pollution due to its fluctuating and recalcitrant nature. OTC is one of the nonbiodegradable antibiotics that makes antibiotic-resistant, so it can make be high risk for environment. NZVI can be a good choice for removal of OTC in aqueous solution. Response surface methodology (RSM) was used to optimize the amounts of NZVI and OTC to be used at pH 3 and under 200 W, UV-A irradiation. The responses were removal percent of absorption at 290 and 348 nm, TOC and COD of OTC. In the optimum condition, Linear model was performed 155 ppm of OTC were removed by 1000 ppm NZVI after 6.5 hours and the removal efficiency of absorption at 290 and 348 nm, TOC and COD were 87, 95, 85 and 89 percent, respectively. In the similar process, there is no organic compound after 14 hours. The parameters ORP, DO and pH were investigated for 6:30 hours to study the type of NZVI reaction in process. In the beginning of reaction, oxidation was the dominant reaction after 3 hours, photocatalytic reaction was remarkable. The mechanism of OTC degradation is proposed by HPLC/ESI-MS and four by products were found. Also the rate constants (first order kinetic chain reaction model) were 0.0099, 0.0021, 0.0010, 0.0049 and $0.0074min^{-1}$, respectively.

• 한국의류학회지
• /
• 제18권1호
• /
• pp.15-22
• /
• 1994

본 연구에서는 면시험포와 cellophane film을 이용하여 xenon arc lamp 를 사용한 인공기후조 안에서 광선의 파장에 따른 강도의 변화와 변색을 조사하였다. Pyrex와 quartz filter를 사용하여 광선의 파장이 섬유의 성질을 변화시키는 중요한 요인임을 밝히고 first-order kinetic model을 사용하여 반응속도를 측정하였다. 또 면섬유의 황변현상을 화학적으로분석하여 파장이 긴 자외선과 가시광선의 영역에서는 황변과 동시에 표백효과가 있음을 알게 되었고 그 속도를 측정하였다. 세가지의 중요한 말단기분석을 통해 carbonyl기의 양이 제일 많고 carboxyl기와 peroxide기도 존재함을 분석하였고 또 이들의 양은 온도와 습도에 따라 변화하는 것으로 나타났다 Cellulose chain의 중합도를 측정하고 이를 cellulose bond scission과 연결시켜서 중합도와 섬유의 강도저하와의 관계를 연구하였다.

• 한국환경과학회지
• /
• 제9권2호
• /
• pp.165-171
• /
• 2000

A kinetic study for anion exchange was performed for commercially available Cl- type anion exchange resin in use to remove nitrate in water. The obtained results from the batch reactor were applied to the Langmuir and Freundlich models. The constants for Lagmuir model were qmax =29.82 and b=0.202, and for Freundlich model were K=5.509 and n=1.772. Langmuir model showed betterfit than Frendlich model for the experimental results. Ion exchange reaction rate was also calculated and the the approximate first-order reaction, rate constant k1 was 0.16 L/mg.hr. Effective diffusion coefficient was obtained in the range from $9.67$\times$10^{-8} cm^2/sec$ for initial concentration change, and from $6.09$\times$10^{-7} to 3.98$\times$10^{-6} cm^2/sec$ for reaction temperature change. Activation energy during the diffusion was calculated as 26 kcal/mol.

• Korean Chemical Engineering Research
• /
• 제53권3호
• /
• pp.309-314
• /
• 2015

야자계 활성탄을 사용하여 수용액으로부터 brilliant blue FCF 염료의 흡착에 대해 조사하였다. 회분식 실험은 흡착제의 양, 초기농도와 접촉시간과 온도를 흡착변수로 사용하여 수행하였다. 흡착평형자료는 Langmuir와 Freundlich 식을 사용하여 해석하였으며, Freundlich 식이 더 좋은 일치도를 나타냈다. 평가된 Freundlich 상수(1/n=0.129~0.212)로부터 활성탄에 의한 brilliant blue FCF의 흡착조작이 적절한 처리방법이 될 수 있음을 알았다. 흡착속도실험자료를 유사일차반응속도식과 유사이차반응속도식에 적용해 본 결과, 흡착동력학은 유사이차반응속도식에 잘 맞는 것으로 나타났다. 음수값의 Gibbs 자유에너지(-4.81~-10.33 kJ/mol)와 양수값의 엔탈피(+78.59 kJ/mol)는 흡착이 자발적이고 흡열공정으로 진행된다는 것을 나타낸다.

• Membrane and Water Treatment
• /
• 제14권4호
• /
• pp.163-173
• /
• 2023

The presence of high amounts of organic and inorganic contaminants in textile wastewater is a major environmental concern. Therefore, the treatment of textile wastewater is an urgent issue to save the aquatic environment. The disposal of large quantities of untreated textile wastewater into inland water bodies can cause serious water pollution. In this study, synthetic dye wastewater samples were prepared using orange dye in the laboratory. The synthetic samples were then treated by a batch adsorption process using the prepared activated carbon (AC) from date pits. The wastewater parameters studied were the pH, total dissolved solids (TDS), total suspended solids (TSS), electrical conductivity (EC) and salinity. The activated adsorption process showed that the maximum removal efficiencies of electric conductivity (EC), salinity, TDS and TSS were 65%, 92%, 89% and 90%, respectively. The removal efficiencies were proportional to the increase in contact time (30-120 min) and AC adsorbent dose (1, 3 and 5 g/L). The adsorption profile indicates that 5 g/L of adsorbent delivers better results for TDS, EC, TSS and salinity at contact time of 120 min. The adsorption characteristics are better suited to the pseudo-second-order kinetic model than to the pseudo-first-order kinetic model. The Langmuir and Freundlich isotherms were well suited for describing the adsorption or contact behavior of EC and TSS within the studied system.

• 한국환경과학회지
• /
• 제14권9호
• /
• pp.881-888
• /
• 2005

The biosorption of dye, Rhodamine B(Rh-B), onto waste activated sludge was investigated. The biosorption capacity and contact time were shown as a simulation of dye adsorption equilibrium and kinetics models. We observed that biosorption of Rh-B occurred rapidly less than 4 hr. These experimental data could be better fitted by a pseudo-second-order rate equation than a pseudo-first-order rate equation. The equilibrium dependence between biosorption capacity and initial concentration of Rh-B was estimated and it was found that the equilibrium data of biosorption were fitted by four kinds of model such as Langmuir, Freundlich, Redlich-Peterson, and Koble-Corrigan model. The average percentage errors, $\varepsilon(\%)$, observed between experimental and predicted values by above each model were $21.19\%,\;9.97\%,\;10.10\%\;and\;11.76\%$, respectively, indicating that Freundlich and Redlich-Peterson model could be fitted more accrately than other models.

• 공업화학
• /
• 제34권1호
• /
• pp.86-93
• /
• 2023

In this study, we investigated the various adsorption factors influencing the adsorption of heavy metal ions based on the study of the composition and physicochemical properties of scoria dispersed throughout Jeju Island. Analysis of the distribution characteristics of scoria samples collected from five areas of Jeju showed that reddish-brown-colored scoria were predominant. Analysis of scoria collected from Jeju Island showed that its mineral components are ordered as follows: SiO₂ > Al₂O₃ > Fe₂O₃ > CaO and MgO. The experimental data did not show a linear relationship in the pseudo-first-order adsorption kinetics. In contrast, a pseudo-second-order model yielded a positive linear relationship, and this model was subsequently used. It could be concluded based on an intraparticle diffusion model indicating linear relationships that the capture of metal ions on scoria is dominated by the primary adsorption step.

• 청정기술
• /
• 제17권2호
• /
• pp.97-102
• /
• 2011

입상활성탄에 의한 아마란스 염료의 흡착특성을 회분식 실험을 통해 조사하였다. 아마란스 염료의 흡착동력학적 연구는 298, 308, 318 K에서 초기농도 100, 200, 300 mg/L의 수용액을 가지고 수행하였다. 입상활성탄에 의한 아마란스 염료의 흡착 평형관계는 298K에서 Langmuir 등온식이 잘 적용되었다. 유사일차반응속도식과 유사이차반응속도식을 사용하여 동력학 실험값을 평가한 결과, 유사이차반응속도식이 더 잘 맞았으며, 속도상수($k_2$) 값은 아마란스 초기농도 100, 200, 300 mg/L 에 대해 각각 0.1076, 0.0531 및 0.0309 g/$mg{\cdot}h$로 조사되었다. 활성화에너지, 표준엔탈피, 표준엔트로피 및 표준자유에너지를 평가하였다. 조사된 표준자유에너지값은 초기농도 200 mg/L 에서 -5.08 ~ -8.10 kJ/mol로 자발적인 공정임을 알 수 있었다. 엔탈피변화량이 양의 값인 38.89 kJ/mol을 나타내어 활성탄에 대한 아마란스 염료의 흡착이 흡열반응으로 일어난다는 것을 알 수 있었다.

• Advances in environmental research
• /
• 제6권2호
• /
• pp.113-125
• /
• 2017

Santa Barbara Amorphous-15(SBA-15) nanoparticles were utilized as the inexpensive and effective adsorbents to remove methylene blue dye from the aqueous solution.SBA-15 was created by Zhao et al method. Infrared spectroscopy, X-ray diffraction and scanning electron microscopy (SEM) were used for the evaluated physical properties of SBA-15. The results of diffraction X-ray indicated that was the crystalline structure for it. Also IR spectroscopy indicated was a silica the whole structure of the groups and SEM image verify the structure of relatively identical particles size of SBA-15. Factors affecting adsorption including the amounts of adsorbent, pH and contact time were investigated by a SBA-15 nanomaterial design. The extent of dye removal enhanced with increasing initial dye concentration and pH from 4 to 10. The higher percentage adsorption were obtained under optimum conditions of variables (sorbent dose of 200 mg/liter, initial MB concentration 10 mg/liter, initial pH of 10 and temperature of $25^{\circ}C$). Maximum adsorption happened after the 2 hour and the kinetic processes of the dyes adsorption were described by applying the pseudo-first-order and the pseudo-second-order and the relatively High correlation with the kinetic Ellovich models. It was found that the pseudo-second-order models kinetic equation described the data of dye adsorption with a good correlation (R2>0.999) which indicated chemisorption mechanism. Freundlich and Langmuir adsorption models were investigated in conditions of variables (adsorbent dose 0.01 gr/liter, MB concentration 10, 20, 30 mg/liter, pH of 4, 7, 10, contact time 90 min and temperature of $27^{\circ}C$). The adsorption data were represented by Langmuir isotherm model. These values are higher than the adsorption capacities of some other adsorbents that have recently been published in the literature.