• Journal of Ocean Engineering and Technology
• /
• v.31 no.4
• /
• pp.257-265
• /
• 2017

In this study, a series of numerical simulations was conducted in order to design a truncated mooring line with a static similarity to the prototype. A finite element method based on minimizing the potential energy was utilized to describe the dynamics of mooring lines. The prototype mooring lines considered were installed at a water depth of 1,000 m, whereas the KRISO ocean engineering basin (OEB) in Daejeon has a water depth of 3.2 m, which represents 192 m using a scaling of 1:60. First, an investigation for the design of the truncated mooring line was carried out to match the static characteristics of the KRISO Daejeon OEB environment. Then, the same procedure was performed with the KRISO new deepwater ocean engineering basin (DOEB) that is under construction in Busan. This new facility has a water depth of 15 m, which reflects a real scale depth of 900 m considering the 1:60 scaling factor. A finite element method was used to model the mooring line dynamics. It was found that the targeted truncated mooring line could not be designed under the circumstances of the KRISO OEB with any material properties, whereas several mooring lines were easily matched to the prototype under the circumstances of the KRISO DOEB.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.4
• /
• pp.382-390
• /
• 1999

In order to identify the responses of Korean soybean cultivars to sudden death syndrome (SDS), forty-two Korean cultivars and three check cultivars (Hartwig and PI 520733 are resistant; Hartz 6686 is susceptible) were tested with sorghum seed inoculum infested with Fusarium solani f. sp. glycines isolate 171 in the greenhouse. This isolate has blue pigment cultural shape on potato dextrose agar (PDA) medium. All Korean cultivars inoculated with F. solani isolate 171 showed the typical SDS symptoms and disease severity on soybean leaves in each cultivar varied at 4 weeks after inoculation. Nine cultivars were included in the most SDS susceptible group and six cultivars were included in the most susceptible group based on Duncan＇s multiple range tests (P$\leq$0.05). In results of the LSD analysis for SDS the resistant group, a total of twenty-five Korean cultivars were included in the same SDS resistant group as PI 520733 or Hartwig and fourteen Korean cultivars were included in the same SDS susceptible group as Hartz 6686. In the second experiment, ten Korean cultivars, ten U.S. cultivars, and one introduced line were compared in the same way as the first experiment Disease severity ranking of check cultivars, Hartwig, PI 520733, and Hartz 6686, were the same as in the first experiment. Within Korean cultivars, seven cultivars showed the consistent severity proportions of leaf symptoms. Disease rankings of these cultivars in this experiment were the same as those in the first experiment. Three US cultivars: Hartwig, Hartz 5454, and Forrest, three Korean cultivars： Keunolkong, Myeongjunamulkong, and Jinpumkong 2, and one introduced line, PI 520733, were included in the highest SDS resistant group. Shinphaldalkong 2, Milyang 87, and Samnamkong consistently showed the highest SDS susceptibility in both experiments. Average disease severity in the first and the second experiment were 49.56% and 45.39%, respectively.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1993.10a
• /
• pp.12-19
• /
• 1993

In general, the line balancing problem is defined as of finding an assignment of the given jobs to the workstations under the precedence constraints given to the set of jobs. Usually, the objective is either minimizing the cycle time under the given number of workstations or minimizing the number of workstations under the given cycle time. In this paper, we present a new type of an assembly line balancing problem which occurs in an electronics company manufacturing home appliances. The main difference of the problem compared to the general line balancing problem lies in the structure of the precedence given to the set of jobs. In the problem, the set of jobs is partitioned into two disjoint subjects. One is called the set of fixed jobs and the other, the set of floating jobs. The fixed jobs should be processed in the linear order and some pair of the jobs should not be assigned to the same workstations. Whereas, to each floating job, a set of ranges is given. The range is given in terms of two fixed jobs and it means that the floating job can be processed after the first job is processed and before the second job is processed. There can be more than one range associated to a floating job. We present a procedure to find an approximate solution to the problem. The procedure consists of two major parts. One is to find the assignment of the floating jobs under the given (feasible) assignment of the fixed jobs. The problem can be viewed as a constrained bin packing problem. The other is to find the assignment of the whole jobs under the given linear precedence on the set of the floating jobs. First problem is NP-hard and we devise a heuristic procedure to the problem based on the transportation problem and matching problem. The second problem can be solved in polynomial time by the shortest path method. The algorithm works in iterative manner. One step is composed of two phases. In the first phase, we solve the constrained bin packing problem. In the second phase, the shortest path problem is solved using the phase 1 result. The result of the phase 2 is used as an input to the phase 1 problem at the next step. We test the proposed algorithm on the set of real data found in the washing machine assembly line.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.2
• /
• pp.925-928
• /
• 2014

Background: Gestational trophoblastic neoplasia (GTN) is a spectrum of disease with abnormal trophoblastic proliferation. Treatment is based on FIGO stage and WHO risk factor scores. Patients whose score is 12 or more are considered as at extremely high risk with a high likelihood of resistance to first line treatment. Optimal therapy is therefore controversial. Objective: This study was conducted in order to summarize the regimen used for extremely high risk or resistant GTN patients in our institution the in past 10 years. Materials and Methods: All the charts of GTN patients classified as extremely high risk, recurrent or resistant during 1 January 2002 to 31 December 2011 were reviewed. Criteria for diagnosis of GTN were also assessed to confirm the diagnosis. FIGO stage and WHO risk prognostic score were also re-calculated to ensure the accuracy of the information. Patient characteristics were reviewed in the aspects of age, weight, height, BMI, presenting symptoms, metastatic area, lesions, FIGO stage, WHO risk factor score, serum hCG level, treatment regimen, adjuvant treatments, side effects and response to treatment, including disease free survival. Results: Eight patients meeting the criteria of extremely high risk or resistant GTN were included in this review. Mean age was 33.6 years (SD=13.5, range 17-53). Of the total, 3 were stage III (37.5%) and 5 were stage IV (62.5%). Mean duration from previous pregnancies to GTN was 17.6 months (SD 9.9). Mean serum hCG level was 864,589 mIU/ml (SD 98,151). Presenting symptoms of the patients were various such as hemoptysis, abdominal pain, headache, heavy vaginal bleeding and stroke. The most commonly used first line chemotherapeutic regimen in our institution was the VAC regimen which was given to 4 of 8 patients in this study. The most common second line chemotherapy was EMACO. Adjuvant radiation was given to most of the patients who had brain metastasis. Most of the patients have to delay chemotherapy for 1-2 weeks due to grade 2-3 leukopenia and require G-CSF to rescue from neutropenia. Five form 8 patients were still survived. Mean of disease free survival was 20.4 months. Two patients died of the disease, while another one patient died from sepsis of pressure sore wound. None of surviving patients developed recurrence of disease after complete treatment. Conclusions: In extremely high risk GTN patients, main treatment is multi-agent chemotherapy. In our institution, we usually use VAC as a first line treatment of high risk GTN, but since resistance is quite common, this may not suitable for extremely high risk GTN patients. The most commonly used second line multi-agent chemotherapy in our institution is EMA-CO. Adjuvant brain radiation was administered to most of the patients with brain metastasis in our institution. The survival rate is comparable to previous reviews. Our treatment demonstrated differences from other institutions but the survival is comparable. The limitation of this review is the number of cases is small due to rarity of the disease. Further trials or multicenter analyses may be considered.

• Transactions on Electrical and Electronic Materials
• /
• v.17 no.6
• /
• pp.363-368
• /
• 2016

Rectangular shape detection plays an important role in many image recognition systems. However, it requires continued research for its improved performance. In this study, we propose a strong rectangular shape detection algorithm, which combines the canny edge and line detection algorithms based on the perpendicularity and parallelism of a rectangle. First, we use the canny edge detection algorithm in order to obtain an image edge map. We then find the edge of the contour by using the connected component and find each edge contour from the edge map by using a DP (douglas-peucker) algorithm, and convert the contour into a polyline segment by using a DP algorithm. Each of the segments is compared with each other to calculate parallelism, whether or not the segment intersects the perpendicularity intersecting corner necessary to detect the rectangular shape. Using the perpendicularity and the parallelism, the four best line segments are selected and whether a determined the rectangular shape about the combination. According to the result of the experiment, the proposed rectangular shape detection algorithm strongly showed the size, location, direction, and color of the various objects. In addition, the proposed algorithm is applied to the license plate detecting and it wants to show the strength of the results.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.4 s.175
• /
• pp.991-1000
• /
• 2000

Previous area-based stereo matching algorithms find the disparity by first computing the sum of squared differences (SSD) between corresponding points using a rectangular window, and then searching the position of the minimum SSD within the disparity range. These algorithms generate relatively many matching errors around depth discontinuities, since the SSD function may fail to search for the minimum because of varying disparity profiles in such areas. In this paper, in order to improve the matching accuracy around the depth discontinuities, a new correlation function based on robust estimation technique is proposed for stereo matching. In addition, while previous stereo algorithms utilize a single rectangular window for computing the correlation function, the proposed matching algorithm utilizes 4-directional line masks additionally to reduce the matching errors further. It has been turned out that the proposed algorithm reduces matching errors around depth discontinuities significantly. Experimental results are presented in this paper, comparing the performance of the proposed technique with those of previous algorithms using both synthetic and real images.

• The Research Journal of the Costume Culture
• /
• v.13 no.3 s.56
• /
• pp.425-438
• /
• 2005

This study is to examine the types of expression and aesthetic characteristics of on-line game characters by analyzing those game characters' body and their costume that appear in various domestic on-line game sites. It is shown in this study that types of the human bodies and costume expressed through the game characters are grouped into five categories such as exposure and tightness, enlargement and exaggeration, curtailment and simplification, gender stereotype and unification. Furthermore, there are four typical aesthetic characteristics resulting from those types of expressions; First, 'grotesque' is expressed in the form of extreme enlargement and exaggeration, extreme exposure and concealment, combined images among human, animal or machine, or monstrous devilish images. Second, in an effort to express 'eroticism', bodies are directly exposed, see-through costumes are used in order to emphasize the body lines or very tight designs are used. Third, 'futuristic' characteristics are shown through geometrical shape and silhouette, machine-like details, strong artificial colors or glossy hi-tech material. Lastly, 'pastiche' is expressed with reconciliation of variety of costumes of game characters. Various opposite or heterogeneous styles are combined or harmonized each other to show pastiche, of which examples are male and female, superior culture and inferior one, rich and poor, oriental and western, human and machine, human and nature or past and future, etc.

• Journal of the Korean Society for Railway
• /
• v.9 no.6 s.37
• /
• pp.657-663
• /
• 2006

By measuring concrete temperature and strains of concrete and reinforcing bars throughout gages embedded and also by observing the crack occurrence, this study aims at the characteristics of structural behavior of subway wall structure in associate with concrete ages. The length of 23.5m, thickness of 2.0m of real subway custody line was selected as a representative structure and 7 thermocouples and 6 strain gages were installed to measure the behavior of wall structure. The results were compared and verified with analytical results using MIDAS in order to show their usefulness. It was found that only attachment of strain gages on the surface of reinforcing bars can figure out the timing of crack occurrence and hydration heat program is useful to estimate comparatively exact magnitudes of temperature. Since estimated time of crack occurrence throughout thermal stress analysis depends on the period of transferred thermal stress from concrete to reinforcing bars, however, cracks from naked eyes were identified later than analytical results. Cracks were observed first at the center of wall line and then to the end of line symmetrically.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.771-774
• /
• 2000

RP techniques have inherent disadvantages caused by their working principles: stair-stepped surface of parts due to layer-by-layer stacking of layers, low build speed caused by line-by-line solidification to finish one layer, and post processing to improve surface finish, etc. The objective of this study is to propose a new RP technique, variable deposition manufacturing (VDM), which can make up for the disadvantages of the existing RP techniques, and to develop an apparatus to implement the technique. The proposed process can greatly reduce the building time and improve the surface finish of parts generated. The experiments are carried out to obtain the range of temperature of molten material to maintain its fluidity and to investigate the effect of gas cooling on the preservation of the slopes. Based on the results, some simple shapes such as a line-shape. an S-shape, and a circle-shape were fabricated from Ethylene Vinyl Acetatecopolymer (EVA). In order to examine the applicability of VDM to more general shapes, a tensile specimen and a yo-yo shape were manufactured by the proposed RP method using EVA material as the first trial approach. The present basic study has shown the possibility of a practicable utilization of the proposed VDM process to prototyping of a general three-dimensional shape.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.41-45
• /
• 2006

The fabrication process of fiber placement system of carbon fiber reinforced plastic (CFRP) requires real time process control and reliable inspection to ensure quality by preventing defects such as delamination and void. Therefore, novel non-contact inspection technique is required during the non-destructive evaluation in a fiber placement system. For the inspection of delamination in CFRP, various methods to receive laser-generated ultrasound were applied by using piezoelectric transducer, air-coupled transducer, wavelet transform and scanning laser ultrasonic technique. Laser-generated ultrasound was received with a conventional piezoelectric sensor in contacting manner. Then signal characteristics due to defects were analyzed to find a factor for detecting defects. Air-coupled transducer was used for reception of laser-generated guided wave using linear slit array in order to generate high frequency guided wave. And line scan technique was used to confirm the capability of on-line application. The high frequency component of laser-generated guided wave received with piezoelectric sensor disappeared after propagating through delamination region. Nevertheless, it was failed to receive high frequency guided wave in using air-coupled transducer. The first peak of the frequency spectrum under 100kHz in the delamination region is higher than in the sound region. By using this feature, the line scanned frequency data were acquired in fully non-contact generation and reception of ultrasound. This method was proved as useful technique for detecting delamination in CFRP.