• Journal of Energy Engineering
• /
• v.8 no.4
• /
• pp.592-604
• /
• 1999

The steady state and dynamic characteristics of large cell area MCFC stacks were analyzed to solve the problems such as temperature difference generated in stacks and pressure difference between anode and cathode. Manipulated variables (current density, duel utilization rate, oxidant utilization rate) and controlled variables (temperature difference, anode and cathode pressure difference) which had an important effect on the MCFC stack performance were determined using operation results of two types of MCFC stacks (5kW (3,000 $\textrm{cm}^2$, 20 ea). 3kW (6,000 $\textrm{cm}^2$, 5ea)). The stability and transfer function representing system dynamics were obtained by steady state gain rate which showed the relative change between MVs and CVs. The transfer function was a 3$\times$3 matrix and a typical first order system without time delay. The optimal operating condition of large cell area MCFC stacks could be determined by analyzing dynamic characteristics. In case of a 5 kW MCFC stack, pressurized operation with recycle flow should be used to control the outlet temperature less than 68$0^{\circ}C$ and to control the MCFC system effectively. MIMO control or decoupler should be used to remove the interaction between MVs and CVs. This result will be used as important data in determining the control structure design and operation mode of large cell area MCFC systems in the future.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.12
• /
• pp.842-849
• /
• 2007

For a $CO_2$ two-stage twin rotary compressor used for heat pump water heater system, changes of $CO_2$ solubility in PAG oil were investigated along the gas passages from the first stage suction to final discharge. Only slight changes in solubility took place in suction chambers for both of the first and second stages, but for compression chambers, solubility variation ranged from 0.115 to 0.136, and from 0.133 to 0.182, respectively for the first and second stages. Calculation of gas flashing in parts of leakage oil flows and of oil contained in control volumes due to solubility changes was conducted and included in gas pressure calculation. For the second stage, gas flashing amounts to around $5%\sim6%$ for most leakage flows. Cooling capacity, compressor input, and COP obtained by calculation were well compared to the experimental results. Effects of operation speed on the compressor performance was also studied: as the shaft speed increased, adiabatic efficiency decreased rapidly due to increased over-compression loss.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.9
• /
• pp.1407-1416
• /
• 2007

Ten, first lactation, 87.5%HF dairy cattle were used to investigate effects of long-term administration of recombinant bovine somatotropin (rbST) on nutrient uptake by the mammary gland at different stages of lactation. Measurements of arterial plasma concentrations and arterial-venous differences of metabolites across the mammary gland were performed in combination with measurment of mammary blood flow to estimate the mammary uptake. Animals in experimental groups were injected subcutaneously every 14 days from day 60 of lactation with a prolonged-release formulation of 500 mg of rbST (POSILAC, Monsanto, USA) or with sterile sesame oil without rbST in the control group. During early lactation, the milk yield of rbST-treated animals was higher than that of the control animals (p<0.05). The peak milk yield in both groups of animals declined from the early period of lactation with progression to mid- and late-lactation. No significant changes were observed in the concentration of milk lactose, while the concentrations of milk protein significantly increased as lactation advanced to mid- and late-lactation in both groups. Milk fat concentrations were significantly higher in rbST-treated animals than in control animals, particularly in early lactation (p<0.05). Mammary blood flow (MBF) markedly increased during rbST administration and was maintained at a high level throughout lactation. The mean arterial plasma concentrations for glucose and acetate of rbST-treated animals were unchanged. The net mammary glucose uptake of rbST-treated animals increased approximately 20% during early lactation, while it significantly decreased (p<0.05), including the arteriovenous differences (A-V differences) and extraction ratio across the mammary gland, as lactation advanced to mid- and late-lactation. A-V differences, mammary extraction and mammary uptake for acetate increased during rbST administration and were significantly higher (p<0.05) than in the control animals in early and mid-lactation. Mean arterial plasma concentrations for ${\beta}$-hydroxybutyrate and free glycerol were unchanged throughout the experimental periods in both groups. A-V differences and extraction ratio of ${\beta}$-hydroxybutyrate across the mammary gland did not alter during rbST administration. Mean arterial plasma concentrations for free fatty acids ($C_{16}$ to $C_{18}$), but not for triacylglycerol, increased in rbST-treated animals and were significantly higher than in control animals during early lactation (p<0.01). These findings suggest that an increase in MBF during rbST administration would not be a major determinant in the mediation of nutrient delivery and uptake by the mammary gland for increased milk production. Local changes in biosynthetic capacity within the mammary gland would be a factor in the utilization of substrates resulting in the rate of decline in milk yield with advancing lactation.

• Advances in environmental research
• /
• v.4 no.2
• /
• pp.105-117
• /
• 2015

The groundwater is a very important part of the environment and must be protected for the benefit of the present and future generation. The contamination of soil and groundwater by chemicals has become an increasing concern in the recent past. These chemicals enter the groundwater system by a wide variety of mechanisms, including accidental spills, land disposal of domestic and industrial wastes and application of agricultural fertilizers. Once introduced into an aquifer, these contaminants will be transported by flowing groundwater and may degrade water quality at nearby wells and streams. For improving the management and protection of groundwater resources, it is important to first understand the various processes that control the transport of contaminants in groundwater. Predictions of the fate of groundwater contaminants can be made to assess the effect of these chemicals on local water resources and to evaluate the effectiveness of remedial actions. In this study, an attempt has been made to investigate the behaviour of solute transport through porous media using laboratory experiments. Sodium chloride was used as a conservative chemical in the experiment. During the experiment, pulse boundary condition and continuous boundary conditions were used. Experimental results have been presented for conservative solute transport in the sand. The pattern of the break through curve remains almost same in all the cases of varying flow rate and initial concentration of conservative chemical.

• Journal of applied mathematics & informatics
• /
• v.15 no.1_2
• /
• pp.109-126
• /
• 2004

This paper deals with two problems of optimal portfolio strategies in continuous time. The first one studies the optimal behavior of a firm who is forced to withdraw funds continuously at a fixed rate per unit time. The second one considers a firm that is faced with an uncontrollable stochastic cash flow, or random risk process. We assume the firm's income can be obtained only from the investment in two assets: a risky asset (e.g., stock) and a riskless asset (e.g., bond). Therefore, the firm's wealth follows a stochastic process. When the wealth is lower than certain legal level, the firm goes bankrupt. Thus how to invest is the fundamental problem of the firm in order to avoid bankruptcy. Under the case of different lending and borrowing rates, we obtain the optimal portfolio strategies for some reasonable objective functions that are the piecewise linear functions of the firm's current wealth and present some interesting proofs for the conclusions. The optimal policies are easy to be operated for any relevant investor.

• Journal of Korean Society for Atmospheric Environment
• /
• v.18 no.E3
• /
• pp.153-163
• /
• 2002

A laboratory- scale dual-column biofilter system was used to study the biofiltration of dimethyl disulfide (DMDS). The gas flow rate and DMDS concentration to the biofilter were varied to study their effect on the remov-al of dimethyl disulfide. Operating parameters such as pH, temperature, and water content were monitored during the biofilter operation and necessary precautions were taken to keep these parameters within the acceptable limits. It was observed that the removal efficiency of DMDS was optimal at neutral pH values. After five month op-eration, the neutralization of the filter beds with sodium carbonate became necessary for the optimum operation of the biofilters. The microbial population already present in the compost mixtures was found to be adequate in treat-ing DMDS. The compost mixtures were found to be similar in terms of biofiltration efficiency of DMDS. However, pressure drops observed in the first column compost mixture (compost/ peat mulch) was extremely high, making this compost economically not feasible. The second mixture (compost/bark) provided pressure drops within accept-able limits. A minimum residence time of 30 seconds at the optimal operating conditions appeared to be adequate for achieving high removal efficiencies (>90%).

• Korean Journal of Materials Research
• /
• v.12 no.5
• /
• pp.363-368
• /
• 2002

we proposed the use of $Si_2H_ 6/H_2$ chemistry for selective silicon epitaxy growth by low-pressure chemical vapor deposition(LPCVD) in the temperature range $600~710^{\circ}C$ under an ultraclean environment. As a result of ultraclean processing, an incubation period of Si deposition only on $SiO_2$ was found, and low temperature epitaxy selective deposition on Si was achieved without addition of HCI. Total gas flow rate and deposition pressure were 16.6sccm and 3.5mtorr, respectively. In this condition, we selectively obtained high-quality epitaxial Si layers of the 350~1050$\AA$ thickness. In older to extend the selectivity, we kept high pressure $H_2$ environment without $Si_2H_6$ gas for few minutes after first incubation period and then we conformed the existence of second incubation period.

• Journal of Drive and Control
• /
• v.21 no.2
• /
• pp.15-22
• /
• 2024

The objective of this study was to examine whether a gerotor pump used in a transmission could be converted into an electric vehicle thermal management system pump using a virtual design environment. To achieve this objective, we first built an environment that could analyze the performance of a gerotor pump in heat transfer fluid. Flow rate, pressure, and volumetric efficiency were then analyzed when using heat transfer fluid in a gerotor pump. Finally, how large the displacement volume of the pump should be designed when using a heat transfer fluid other than oil was determined. Based on results of this study, it is expected that gerotor pumps will be applied to new business fields such as electric vehicle cooling systems.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.5
• /
• pp.2092-2099
• /
• 2013

Through the data transfer race in industry since 1990s, the operational speed of optical disk drive(ODD) becomes commonly over 10,000 rpm. Such high speed operation inevitably causes the vibration, which is also the disturbances in the read-write process of pick-up servo-controller. Generally the vibration disturbance problem can be solved by the vibration isolation using the rubber mount and the increase of robustness of the pick-up servo-controller. Optical disk itself has not been targeted for the vibration reduction, because it is manufactured under the standardized format. In this paper we focused on the increase of critical speed of optical disk, that is, the improvement of dynamic characteristics, with the control of residual stresses which are come from the injection molding process. To do this, first, the residual stresses induced from the injection molding process are calculated using finite element method. The major design parameters of the process conditions are flow rate and melt temperature, which control the residual stresses in optical disk. Second, the critical speed of optical disk is calculated with modal analysis considering residual stress distributions. It was found out that the critical speed can be improved by the control of operational parameters in the injection molding process.

• Parasites, Hosts and Diseases
• /
• v.45 no.2 s.142
• /
• pp.149-152
• /
• 2007

A cohort was established for evaluation of cancer risk factors in Sancheong-gun, Gyeongsangnam-do, Korea. As one of the cohort studies, stools of 947 residents (403 males and 544 females, age range: 29-86 years) were screened for Clonorchis sinensis eggs using both Kato-Katz method and formalin-ether sedimentation technique. The overall egg positive rate of C. sinensis was 37.7% and individual EPG (eggs per gram of feces) counts ranged from 24 to 28,800. Eight egg positive residents voluntarily joined a process of collection of the passed worms after praziquantel treatment. A total of 158 worms were recovered from 5 of the 8 treated persons, ranged from 3 to 108 in each individual. The worms were $15-20 mm{\times}2-3 mm$ in size, and showed brown-pigmented, red, or white body colors. This is the first collection record of C. sinensis adult worms from humans through anthelmintic treatment and purgation. The adult worms of C. sinensis may be paralyzed by praziquantel and then discharged passively through bile flow in the bile duct and by peristaltic movement of the bowel.