• 한국지진공학회논문집
• /
• 제15권2호
• /
• pp.35-42
• /
• 2011

현재까지 축적된 많은 연구결과와 설계기준을 바탕으로 일반적인 중실단면을 갖는 철근콘크리트 교각의 경우 큰 어려움 없이 내진설계가 수행되고 있지만, 중공원형 철근 콘크리트 교각의 경우 실험 및 해석상의 어려움으로 인하여 국내 외적으로 심부구속철근 상세에 대한 명확한 설계기준과 함께 이에 대한 합리적인 구속 모델 및 내진 성능평가 방안 등은 아직까지 미비한 실정이다. 본 연구에서는 주요 설계변수에 따른 중공원형 철근콘크리트 교각의 내진거동 특성을 파악하고, 이를 신뢰성 있는 비선형 유한요소해석 프로그램(RCAHEST)을 통한 결과와의 비교 분석을 바탕으로 보다 경제적이고 합리적인 설계방안 마련을 위한 기초자료를 제시하고자 한다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제16권2호
• /
• pp.42-46
• /
• 2014

In this study we investigated ac transport current losses in the face to face stack for the anti-parallel current flow, and compared the electromagnetic properties with those of the single SC tape as well as those of the same stack for the parallel current path. The gap between the SC tapes in the stack varied in order to verify the electromagnetic influence of the neighbors when current flows in opposite direction, and the model was implemented in the finite element method program by the commercial software, COMSOL Multiphysics 4.2a. Conclusively speaking, the loss was remarkably decreased for the anti-parallel current case, which is attributed the magnetic flux compensation between the SC layers due to the opposite direction of the current flows. As the gap between SC tapes was increased, the loss mitigation became less effective. Besides, the current density distribution is very flat cross the sample width for the narrower gap case, which is believed to be benefit for the power electric system. These results are all in good agreement with those predicted theoretically for an infinite bifilar stack.

• 한국항공우주학회지
• /
• 제37권10호
• /
• pp.984-991
• /
• 2009

본 연구에서는 충격파 및 유동박리효과를 고려하여 항공기 동체-날개 형상(DLR-F4)에 대한 천음속 공탄성 응답해석을 수행하였다. 시간 영역에서 전산유체역학, 유한요소모델 및 전산구조동역학 기법을 활용한 유체-구조 연계시스템을 적용하여 공탄성 해석을 수행 하였으며, 이를 이용하여 비행체의 설계에 정확하고 유용한 결과를 제시할 수 있다. 천음속 영역에서 항공기 동체-날개 형상에 대해 비선형 비정상 공력해석을 수행하기 위하여 6면체 구조 격자를 생성하였고, Navier-Stokes 방정식을 적용하였다. 항공기 동체-날개 형상의 정적 및 동적 공탄성 응답 특성을 파악하였고, 항공기 설계 및 시험 연구자에게 실제적이고 유용한 결과를 제시할 수 있다.

• Journal of Welding and Joining
• /
• 제27권6호
• /
• pp.31-35
• /
• 2009

When conducting CTOD test, especially in thick welded steel plate, fatigue pre-cracking occasionally failed to satisfy the requirements of standards thus making the test result invalid. Internally accumulated residual stress of test piece has been thought as one of the main reasons. The propagation of fatigue crack, started from the tip of machined notch, which might have propagated irregularly due to residual stress field. To overcome this kind of difficulty three methods to modify the residual stress are suggested in standard i.e. local compression, reverse bending and stepwise high-R ratio method. In this paper not only multi pass welding but also local pre-compressing process of thick steel plate has been simulated using finite element method for clarifying variation of internal welding residual stress. The simulated results show that welding residual stress is compressive in the middle section of the model and it is predominantly increased after machining the specimen. Comparing as-welded state all component of the welding residual stress changing to compressive in the tip of machine notch whereas residual stress of the outer area remain as tensile condition relatively. Analysis results also show that this irregular residual stress distribution is improved to be more uniformly by applying local compression.

• Steel and Composite Structures
• /
• 제36권1호
• /
• pp.75-86
• /
• 2020

The grid structures with welded hollow spherical joint (WHSJ) have gained increasing popularity for use in industrial buildings with suspended cranes, and usually welded with steel tube (ST). The fatigue performance of steel tube-welded hollow spherical joint (ST-WHSJ) is however not yet well characterized, and there is little research on fatigue life prediction methods of ST-WHSJ. In this study, based on previous fatigue tests, three series of specimen fatigue data with different design parameters and stress ratios were compared, and two fatigue failure modes were revealed: failure at the weld toe of the ST and the WHSJ respectively. Then, S-N curves of nominal stress were uniformed. Furthermore, a finite element model (FEM) was validated by static test, and was introduced to assess fatigue behavior with the hot spot stress method (HSSM) and the effective notch stress method (ENSM). Both methods could provide conservative predictions, and these two methods had similar results. However, ENSM, especially when using von Mises stress, had a better fit for the series with a non- positive stress ratio. After including the welding residual stress and mean stress, analyses with the local stress method (LSM) and the critical distance method (CDM, including point method and line method) were carried out. It could be seen that the point method of CDM led to more accurate predictions than LSM, and was recommended for series with positive stress ratios.

• Nuclear Engineering and Technology
• /
• 제53권5호
• /
• pp.1540-1555
• /
• 2021

The plate-type fuel assembly adopted in nuclear research reactor suffers from complicated effect induced by non-uniform irradiation, which might affect its stress conditions, mechanical behavior and thermal-hydraulic performance. A reliable numerical method is of great importance to reveal the complex evolution of mechanical deformation, flow redistribution and temperature field for the plate-type fuel assembly under non-uniform irradiation. This paper is the first part of a two-part study developing the numerical methodology for the thermal-fluid-structure coupling behaviors of plate-type fuel assembly under irradiation. In this paper, the thermal-fluid-structure coupling methodology has been developed for plate-type fuel assembly under non-uniform irradiation condition by exchanging thermal-hydraulic and mechanical deformation parameters between Finite Element Model (FEM) software and Computational Fluid Dynamic (CFD) software with Mesh-based parallel Code Coupling Interface (MpCCI), which has been validated with experimental results. Based on the established methodology, the effects of non-uniform irradiation and fluid were discussed, which demonstrated that the maximum mechanical deformation with irradiation was dozens of times larger than that without irradiation and the hydraulic load on fuel plates due to differential pressure played a dominant role in the mechanical deformation.

• 한국지반공학회논문집
• /
• 제34권11호
• /
• pp.33-41
• /
• 2018

지반의 내부침식은 유체 흐름에 의하여 입자골격에 부착된 세립토가 이탈하는 현상이며, 지속적인 세립토의 유동은 지반구조물의 수리-역학적 특성을 약화시킨다. 본 논문은 세립토의 유동에 관한 지배방정식을 정립하고 수치해석 기법을 제안하였다. 공극내의 세립토는 액상의 세립토($c_e$), 조립토에 부착된 입자(${\sigma}_a$) 그리고 조립토골격에 폐색된 세립토(${\sigma}_s$)로 구분하여 상관계를 제시하였다. 이를 바탕으로 세립토의 유동과 공극수의 흐름에 대한 수리학적 지배방정식들과 유한요소 수식화를 제시하였다. 세립토의 이탈, 부착 그리고 공극막힘에 대한 구성 모델들을 제시하였으며, 실내 1차원 침식실험으로부터 모델변수를 도출하는 방법을 제안하였다. 그리고 세립토의 공극 막힘 현상에 의한 지반의 투수계수 변화에 대한 추정식을 제안하였다. 기존의 침식실험 결과에 대한 수치해석을 통하여 개발된 해석기법과 세립토 유동 모델의 적정성을 검증하였다.

• Steel and Composite Structures
• /
• 제30권5호
• /
• pp.483-492
• /
• 2019

In the current study, the influence of the initial lateral (sweep) shape and the cross-sectional twist imperfection on the lateral torsional buckling (LTB) response of doubly-symmetric steel I-beams was investigated. The material imperfection (residual stress) was not considered. For this objective, standard European IPN 300 beam with different unbraced span was numerically analyzed for three imperfection cases: (i) no sweep and no twist (perfect); (ii) three different shapes of global sweep (half-sine, full-sine and full-parabola between the end supports); and (iii) the combination of three different sweeps with initial sinusoidal twist along the beam. The first comparison was done between the results of numerical analyses (FEM) and both a theoretical solution and the code lateral torsional buckling formulations (EC3 and AISC-LRFD). These results with no imperfection effects were then separately compared with three different shapes of global sweep and the presence of initial twist in these sweep shapes. Besides, the effects of the shapes of initial global sweep and the inclusion of sinusoidal twist on the critical buckling load of the beams were investigated to unveil which parameter was considerably effective on LTB response. The most compatible outcomes for the perfect beams was obtained from the AISC-LRFD formulation; however, the EC-3 formulation estimated the $P_{cr}$ load conservatively. The high difference from the EC-3 formulation was predicted to directly originate from the initial imperfection reduction factor and high safety factor in its formulation. Due to no consideration of geometric imperfection in the AISC-LFRD code solution and the theoretical formulation, the need to develop a practical imperfection reduction factor for AISC-LRFD and theoretical formulation was underlined. Initial imperfections were obtained to be more influential on the buckling load, as the unbraced length of a beam approached to the elastic limit unbraced length ($L_r$). Mode-compatible initial imperfection shapes should be taken into account in the design and analysis stages of the I-beam to properly estimate the geometric imperfection influence on the $P_{cr}$ load. Sweep and sweep-twist imperfections led to 10% and 15% decrease in the $P_{cr}$ load, respectively, thus; well-estimated sweep and twist imperfections should considered in the LTB of doubly-symmetric steel I-beams.

• 마이크로전자및패키징학회지
• /
• 제25권4호
• /
• pp.59-66
• /
• 2018

본 논문에서는 수치해석을 사용하여 반도체용 패키지에 적용된 인쇄회로기판 (PCB(printed circuit board)) 구조를 다층 구조의 소재 특성을 모델링한 것과 단일 구조라고 가정한 모델링을 적용하여 warpage를 해석함으로써 단일 구조 PCB 모델링의 유용성을 분석하였다. 해석에는 3층과 4층 회로층을 갖는 PCB가 사용되었다. 또한 단일 구조 PCB의 재료 특성값을 얻기 위해 실제 제품을 대상으로 측정을 수행하였다. 해석 결과에 의하면 PCB를 다층 구조로 모델링한 경우에 비해 단일 구조로 모델링한 경우에 warpage가 증가하여 PCB 구조의 모델링에 따른 warpage 분석결과가 분명한 유의차가 있었다. 또한, PCB의 회로층이 증가하면 PCB의 기계적 특성인 탄성계수와 관성모멘트가 증가하여 패키지의 warpage가 감소하였다.

• 한국지반환경공학회 논문집
• /
• 제12권8호
• /
• pp.51-57
• /
• 2011

섬진강 하류지역은 1978년 이후 지속적인 하상 세굴로 인하여 염수 침입이 확대된 지역으로서, 본 연구에서는 지하댐 설치 시의 염수침입 차단 효과를 수치모델로서 평가하였다. 현재 섬진강 하류 지표수의 염소이온농도는 상류로 가면서 지수함수적으로 감소하며, 지하수내 농도는 지표수의 1/10 이내로 나타난다. 하구로부터 4.6km 지점에 암반 상부로부터 25m 높이의 지하댐을 설치하는 조건으로 FEM 모델인 FEFLOW를 수행한 결과, 지하댐 상류의 퇴적 작용으로 현재보다 충적층의 두께가 5m 정도 두꺼워진다면 하구로부터 25km 지점에서의 염소이온농도(0.25psu)가 하류로 약 3km 정도 이동하는 것으로 나타났다. 반면에, 지하댐 상류에 퇴적물이 쌓이지 않을 경우에는 지하댐 설치 효과가 미미한 것으로 해석되었다.