• 한국정밀공학회지
• /
• 제16권3호통권96호
• /
• pp.84-90
• /
• 1999

The finishing process for dies and molds is directly related to finished surface quality, but many parts of process depend on human labor which needs much time and value. So automatic finishing machine has been produced for dies and molds, and applied widely for finishing process. Conventionally finishing machine has applied resin bonded finishing pad as a tool, but the removal ability of pad decreases greatly as finishing process goes on. In the finishing mechanism for dies and molds, finishing process is affected severely by cutting process, so can be divided into removing cusp and smoothing surface process. So, this study investigated the application of cast iron bonded diamond pellet for press dies, which is considered to have better characteristics than the other metal bonded pellets. The finishing characteristics were compared the between finishing pellet and pad. And finishing performance was appraised as the several cutting surfaces.

• The International Journal of Costume Culture
• /
• 제8권2호
• /
• pp.124-131
• /
• 2005

This study focused on the change of skin temperature by the emissivity and emission power of far-infrared for conformant far infrared effect to naked eyes. The study method is to manufacture the bra pad by each concentration on far-infrared materials of illite powder $(K,H_3O)AI_2(Si,Al)_4O_{10}(H_2O,OH)_2)$, liquid alumina ($Al_2O_3$), the extracted liquid from 29 kind of medical plants, then, measured change of skin temperature. Result are as follows. Far-infrared were emitted each $90.2\%,\;90.1\%,\;89.7\%$ from the illite powder, liquid alumina, extracted liquid from medical plants. When the testee weared the bra pad, the temperature of coated bra pad was $0.5^{\circ}C$ higher than the non finished bra pad. Washing fastness on far-infrared finishing was better dope addition method than coating method.

• 한국정밀공학회지
• /
• 제19권10호
• /
• pp.212-220
• /
• 2002

The finishing process for die and mold manufacturing is very important because it influences the final quality of products. Injection molds need higher quality surface than general purpose dies and molds. Conventional polishing can not make mold surface down to nanometer roughness efficiently because of their loading and glazing. This paper focused on the development of fixed abrasive pad using water swelling mechanism of polymer binder network. Self-conditioning was recognized as the long term polishing stabilization tool without any loading or glazing because water makes fixed abrasives free by swelling of the pad. Consequently, stable nano-polishing process has been applied on the injection mold, from the experimental results with polished surface roughness of Ra 15.1nm on STD-11 die steel.

• 한국염색가공학회지
• /
• 제18권6호
• /
• pp.25-30
• /
• 2006

Degumming is an essential process to improve the luster and smoothness of the silk filament. Silk varieties were degummed using different methods. A number of methods, from pad-steam to specific alkaline are being used for this propose. In this paper an attempt to compare the efficiencies of different degumming processes has been made. from the results, it may be observed that when silk fabrics were pad-steam, the degree of degumming, as assessed by weight loss. When the pad-steam degumming was carried out at different pHs, adjusted using alkalies, it was observed that at higher pH the weight loss is high. Pad-steam degumming as well as star degumming was found to be superior with minimum damage to the substrate. Among the alkalis used, the sodium carbonate gives the best results, since the weight loss is almost maximum with lower strength loss by over degumming. It is also efficient from the point of view of conservation of heat energy and time as against the comparable star degumming.

• 한국염색가공학회지
• /
• 제31권4호
• /
• pp.241-248
• /
• 2019

In this study, improving the wash and rubbing fastness of a natural coloring matter from Madder extract dyed on Tencel nonwoven. The cationic finishing agent(RBP), nonionic finishing agent(HPX) and mordant(PAW) were used to improving the color fastness. The two types(exhaustion and pad-dry-cure) finishing process were investigated with various finishing agent concentration. The color strength, wash and rubbing fastness of Tencel nonwoven dyed with Madder extract have been evaluated by various dye concentration and finishing agent. The exhaustion process treated with the cationic finishing agent(RBP) was effective to improving washing and rubbing fastness.

• 한국의류학회지
• /
• 제24권3호
• /
• pp.440-447
• /
• 2000

The effects of DP finishing conditions including process technique and finishing agent on the mechanical properties and hand of cotton fabrics were investigated. 100% cotton fabrics were treated with NMA/DMDHEU and NMA/YF using wet-fixation and steam-fixation process. For comparison, conventional pad-dry-cure process was used with DMDHEU. After DP finishing, tensile and compressional resilience increased and bending hysteresis decreased, resulting in the improvement of dimensional stability of cotton fabric. WF and SF process rendered fabrics better shear properties, tensile energy, and compressional linearity and energy than PDC process. However, SF process produced fabrics with higher geometrical roughness than WF process. After DP finishing, primary hand values except Koshi increased, resulting in the increase of total hand value of cotton fabric.

• 한국염색가공학회지
• /
• 제8권3호
• /
• pp.31-35
• /
• 1996

Modal fabric was pretreated with sodium hydroxide, sodium persulfate, and their combined mixture by pad-steaming procedure. The tearing strength of the pretreated modal fabric was measured for subsequent microfibrillation. The solubility of modal fiber in sodium hydroxide solution was highest at 10 % concentration of sodium hydroxide. Extended steaming of the modal fabric padded with 6% sodium hydroxide solution did not reduce the tearing strength appreciably. 2% sodium persulfate pretreatment greatly reduced the tearing strength of modal fabric within 7 minutes of steaming time. The pretreatment with combined composition of sodium hydroxide and sodium persulfate brought about stable reduction in tearing strength within 1 minute of steaming time, which would be appricable to the continuous pretreatment of modal fabric for microfibrillation. Microfibrillation behavior of the pretreated modal fabric was tested also.

• 한국의류학회지
• /
• 제48권2호
• /
• pp.300-311
• /
• 2024

Amid global environmental concerns, initiatives to adopt sustainable industrial processes have garnered significant attention in diverse sectors. Efforts have centered on utilizing natural resources as dyeing and functionalizing agents in the textile industry. However, the limited color fastness and functional endurance of natural compounds remains a substantial challenge. This research investigated whether ultrasound could enhance the finishing effect of natural compounds on cotton fabrics. Chestnut shell extract was prepared and applied to cotton fabrics using a pad-dry-cure technique, with concurrent application of ultrasonic power. Once integrated into the fabrics, the chestnut shell extract exhibited prolonged health benefits for users. The findings demonstrated that ultrasound treatment during the finishing process facilitated the diffusion of natural compounds from the chestnut shell extract into the fabric structure, resulting in a substantial enhancement of the finishing effect, notably augmenting the antibacterial properties of the treated cotton fabrics.

• 염색가공
• /
• 제7권
• /
• pp.51-57
• /
• 2012

• 한국염색가공학회지
• /
• 제28권3호
• /
• pp.175-182
• /
• 2016

To investigate dyeing behaviors in accordance with dye structure in cold pad batch dyeing of cotton knit, monochlorotriazine-vinylsulfone bifunctional dyes and monofluorotriazine-vinylsulfone bifunctional dyes were prepared. The spectral property and solubility of the dyes were tested and compared with the imported dyes. In addition, exhaustion behaviors of individual and mixed dye solutions were measured to examine the influence of dye structure on dyeing behavior in cold pad batch dyeing. The substantivity, fixation, migration index and half dyeing time were also calculated for further analysis of dyeing behavior of the prepared dyes. As a result, both dyes exhibited the superior solubilities and satisfactory light absorption properties. Also, monofluorotriazine-vinylsulfone bifunctional dyes showed moderate sensitivity to alkalinity and proper kinetic index values compared with the monochlorotriazine-vinylsulfone bifunctional dyes and the imported dyes. The results indicated monofluorotriazine-vinylsulfone bifunctional structure of the dye is suitable for cold pad batch dyeing.