• Textile Coloration and Finishing
• /
• v.16 no.6
• /
• pp.1-9
• /
• 2004

The dyeings of cotton and silk fabric with Laurus tree extracts were investigated. The colorant was extracted with distilled water at $100^{\circ}C$ for lh. Dyeability(K/S), color fastness and antibacterial property of cotton and silk fabric were tested under conditions of various time, temperature, concentration, repeat-number of dyeing and mordants. The characteristics of dyeings Laurus extracts were figured out by K/S and CIELab values and color-fastness test was estimated in terms of wash fastness and light fastness. The maximum wavelength of spectrum was 670nm. The K/S value of cotton and silk fabric increased with increasing dyeing time and the exhaustion was saturated in 90min. Optical dyeing temperatures of cotton and silk fabrics were $60^{\circ}C$ and $80^{\circ}C$, respectively. The mordant effect on cotton fabric was achieved using Fe mordant. On the other hand, the mordant effect on silk fabric was obtained using Fe and Cu mordants. The wash fastness of cotton fabric was higher than that of silk fabric. Antibacterial property of silk dyeing was greater than that of cotton dyeing. In addition, the excellent antibacterial effect was imparted by Fe-post mordant method.

• Textile Coloration and Finishing
• /
• v.30 no.2
• /
• pp.141-149
• /
• 2018

This study aimed to investigate the efficacy of eco-friendly leather dyeing by utilizing food wastes. Natural dyeing of eel skin was attempted using onion peels which have been used commonly for natural dyeing of textile fabrics. Eel skin is a by-product from fishery processing and is used mainly for making leather products. The colorant was extracted from onion peels in boiling water, concentrated, and freeze-dried. Dyeing of eel skin was carried out to study the effects of dyeing conditions, mordant type and mordanting method on dye uptake, color change, drape stiffness and colorfastness. The optimum dyeing conditions were $60^{\circ}C$ of dyeing temperature, 60min of dyeing time at 1:100($H_2O$ 90%: ethanol 10%) of bath ratio. The onion peels produced yellowish color on eel skin. The pre-mordanting was effective than the post-mordanting. As a result of the drape stiffness measurement, the Fe-mordanted sample was somewhat stiffer comparing to other mordanted samples. The light fastness of the non-mordant dye was excellent in 3-4 grade. Drycleaning fastness and rubbing fastness showed excellent results, but fastness was not significantly improved by mordanting.

• Journal of Educational Research in Mathematics
• /
• v.10 no.2
• /
• pp.229-246
• /
• 2000

The purpose of this paper is to compare and analyze the two different teaching methods of elementary mathematics in the traditional method and in the constructive view. To do so, the actual class in the constructive view has been made for about four months using a class of 45 students in the second grade of an elementary school. After the class was finished, we collected diverse data from the class, such as the responses from the children(self-evaluation, mathematics diary, observation by the investigator, daily report), class evaluation report by other teacher and so on. The results of this research are as follows: First, the traditional class reaches at the goal of learning in a unit time because the class is guided by the teacher but the class in the constructive view is a little flexible because it is contextual. Second, in the constructive process of mathematical knowledge we knew that small group activities or discussion without intervention of teacher was often ended in exhaustive argument without arriving at valid social consensus. Third, the attitude in mathematics was changed from the passive one to the self-regulated ones. Fourth, the class in the constructive view could extend not only the ability of mathematical communication but also the ability of self-directed learning of children. Fifth, it was a considerable change the role of teacher, that is, guide of instruction instead of unique specialist in the classroom. Sixth, finally, the evaluation was made after finishing a unit class in the traditional instruction but it was integrated in a class in a constructive view.

• KIEAE Journal
• /
• v.5 no.1
• /
• pp.51-57
• /
• 2005

In this study, time-dependent concentration variations of VOCs from fixed furniture and Ondol floor widely used as finishing material of the floor were measured, and prediction equations were developed based on the measured results. VOCs were measured and analyzed based on EPA TO-17 and NIOSH 1500, 1501 method respectively, and GC/FID were used for the analysis of VOCs concentration. Measurements were carried out for 10 days after the installation of furniture and for 40 days after the installation of the floor in the residence constructed more than 10 years ago. In both case of floor and furniture installation, time-dependent concentration decay of VOCs can be properly converted into logarithmic scale. Especially in case of furniture, toluene showed the highest concentration and took longest time to decay. As a result of the prediction of VOCs concentration decay under different air change rate using estimated equations, concentration decay rate of indoor VOCs increased rapidly as the air change rate also increased.

• Korean Journal of Veterinary Service
• /
• v.24 no.4
• /
• pp.335-341
• /
• 2001

Swine dysentery caused by Brachyspira hyodysenteriae, an anaerobic, beta-hemolytic spirochete, is a severe mucohemorrhahic diarrheal disease that primarily affects pigs during the growing and finishing period. The current standard laboratory procedure to culture and identify B hyodysenteriae takes 3 to 7 days. This report present a rapid PCR for detection B hyodysenteriae in a single reaction using DNA from swine intestinal samples. The PCR produced a specific 421bp PCR product with template DNA purified from B hyodysenteriae, and the accuracy for detection of B hyodysenteriae by PCR results compared with those of conventional method was 100% in intestinal specimens. Nonspecific bands were not detected with B innocens, a nonpathogenic common inhabitant spirochete, including other enteric bacterial organisms. This procedure could detect as little as 50 pg of template DNA for B hyodysenteriae.

• Journal of the Korean Home Economics Association
• /
• v.27 no.2
• /
• pp.97-114
• /
• 1989

The purpose of this study is to analyze style and usage of furniture for rural house and to organize the changing process of the furniture. The data were collected from 32 residences in Samga 3-ri village in Youngin Kyungkido by field survey measuring and sketching the furniture were also performed as a supplement of investigation. Qualitative analysis were done by discriptive method. 1) It was found that the major furniture for rural household were storing furniture such as wardrobes, blanket chests, drawer chests, cupboards until 1976. The time when the supportive furniture such as sofa sets and dining sets were purchased on the rural area was after late 1970's. 2) The style of the furniture was investigated through the analysis of the size, material, structure, finishing and ornamentation. The changing process of style was from luxurious look to natural look. Therefore the storing furniture of the rural household showed a state of transition between traditional and modern style. 3) As a result of analyzing the place where the furniture were used, the cupboards showed to move from Marus (the living room area) to Buauks (the kitchens). The wardrobes were mainly used in An-Bangs(the master bedrooms) and Kuhnnun-Bangs(the room opposite the master bedrooms), but the style of those wardrobes were different each other.

• Journal of Korean Academy of Nursing
• /
• v.37 no.1
• /
• pp.52-63
• /
• 2007

Purpose: Effective communication is an essential aspect of nursing care. This qualitative study was performed to analyze nurse-patient conversations about medication. Method: The nurse-patient dialogue was collected by video tape recording during the nurse's duty time in an internal medicine ward. One hundred seventy-eight episodes were extracted from the conversation. Using conversational analysis, the functional phases and patterns of dialogue sequence pertaining to medication were analyzed. Results: Conversations about medication were very brief dialogues, so 68.8% of the dialogue had a duration of less than 20 seconds. However, it was a systematic and comprehensive dialogue which had structures and sequential dialogue patterns. Four functional phases were explored. greeting, identifying the patient, medicating, finishing. The medicating phase was essential, in which the nurse gave the drug to the patient and provided information initiated by the nurse simultaneously. The patterns of the dialogue sequence represented were the nurse provided information first, and then, patients responded to the nurse as accepting, rejecting, raising an objection, or asking again later. Conclusion: As the results of this study show, a nurse's role is important as an educator. For effective conversation about medication, the development of an educational program should be considered, which includes knowledge about medication and communication skills.

• KIEAE Journal
• /
• v.4 no.3
• /
• pp.113-119
• /
• 2004

As Building Integrated Photovoltaic(BIPV) system replaces the conventional building finishing materials with PV modules, two function of electricity generation and building envelope can be expected. Therefore BIPV can be a good alternative technology for the 21 century environment-friendly buildings. The objective of this paper is to develope BIPV modules for a commercial buildings of which structure is mainly light-weight, curtain wall system. Two types of module are developed for a opaque part and a transparent part of building envelope. Current technology level and market status of Korea determines the configuration of developed BIPV modules. Architectural considerations for the integration of PV module to building envelope such as building structure, construction type, safety, regulation, maintenance etc. have been carefully reflected from the early stage of BIPV module design. Especially the survey result of current building envelope materials determines the size of unit BIPV modules and a unique cladding method for PV module installation is developed. Trial product of BIPV modules and cladding hardwares are manufactured and sample construction details for a demonstration building are proposed.

• The Mathematical Education
• /
• v.48 no.1
• /
• pp.21-32
• /
• 2009

The purpose of this study is to diagnose the current states and the problems of student assessment of Elementary School Mathematics. For that purpose, this study conducted a survey and had the individual interviews. The surrey items consisted of the six main parts: questions about the development of assessment tools, the method to assess, the grading, the special supplementary courses, the opening of learning effect, and the follow-up guidances. The results of this study are as the follow First, elementary teachers depended heavily on internet sites for developing assessment problems. Second, elementary teachers made use of a performance assessment, a unit assessment, and a term examination at ordinary times. Third, unit assessment was largely referred for grading by elementary teachers. Fourth, in selecting the students for the special supplementary courses, both criterion-referenced assessment and norm-referenced assessment were considered. After finishing the special supplementary courses, additional tests were usually taken. Fifth, elementary teachers took a negative attitude in opening of learning effect. specialty opening of test paper to parents of students was done under 30%. Sixth, fellow-up guidances were the most through the classroom guidances. but consulting with parents of students was not frequently conducted by teachers.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.2
• /
• pp.298-303
• /
• 2013

Magnetic abrasive polishing is one of the most promising finishing methods applicable to complex surfaces. Nevertheless this process has a low efficiency when applied to very hardened materials. For this reason, EP-MAP hybrid process was developed. EP-MAP process is expected to machine complex and hardened materials. In this research, deburring process using EP-MAP hybrid process was proposed. EP-MAP deburring process is applied to micro channel, thereby it can obtain both deburring process and polishing process. EP-MAP deburring process on the micro channel was performed. Through design of experiment method, error of height in this process according to process parameter is analyzed. When the level 1 parameter A(magnetic flux density) and level 2 parameter B(electric potential), C(working gap) and level 3 parameter D(feed rate) are applied in the deburring process using EP-MAP hybrid process, it provides optimum result of EP-MAP hybrid deburring process.