• Journal of the Korean housing association
• /
• v.21 no.6
• /
• pp.53-60
• /
• 2010

Built-in wardrobe is constructing after ordering and making, because built-in wardrobe's size is fixed as housing measurement. It is hard to speak built-in wardrobe components of construction in these ways, and application of an MC (Modular Coordination) design system is meaningless too. And above all, measurement before construction isn't to expect standardization, and to increase custom-made furniture. So I suggest the standardization of built-in wardrobe utilizing standard last finish and reference plane in order to prevent an evil influence of built-in wardrobe's construction. And we utilized a reference plane, and we present construction document and design plan in order to solve these problems. The first stage, we investigate manufacture of a preferential domestic system kitchen and construction state, and we derive from a problem in viewpoints of standardization for this. And we analyze an effect got by application of the assembly basis aspect that we presented, and we can raise efficiency of standardization of housing and construction industry, and we light ultimately up. I will apply a standardization plan as above, and define that this assures a standardization of components and an economic effect.

• Textile Coloration and Finishing
• /
• v.4 no.1
• /
• pp.1-9
• /
• 1992

In order to study on the surface modification of the poly(ethylene Terephthalate)(PET) fabrics, low temperature plasma$(O_2)$ has been irradiated on the PET fabrics in various conditions. Experiments were carried out at pressure ranging from 0.5 tort to 3 tort. The properties of PET fabrics treated with low temperature plasma($(O_2)$, such as bathochromic, wettability, antistatic property were measured. Etching ratio was increased as the pressure and the output of discharge increased. When its were put on the cathode, the most efficient effect of etching according to the position of sample between anode and cathode was obtained. The bathochromic effect has more or less improved as pressure was getting higth in case of dyed fabrics treated with only low temperature plasma$(O_2)$ . And when it was treated with the low refractive index resin, the bathochromic of dyed fabrics treated with low temperature plasma$(O_2)$ was better than that of the dyed fabrics untreated.

• Korean Journal of Veterinary Service
• /
• v.31 no.3
• /
• pp.291-303
• /
• 2008

This study was performed to evaluate the effect of commercial swine mycoplasma vaccine (M+$Pac^{(R)}$, Schering-Plough Animal HealthCo.) at different vaccination time points. Total 139 piglets were moved to experimental farm after weaning and were randomly allocated to 3 treatment groups and 1 control group. Piglets of 3 treatment groups (A, B and C) were vaccinated twice at 1 and 3 weeks (A group), 3 and 5 weeks (B), and 6 and 8 weeks (C), respectively. All vaccinates showed higher antibody titers compared with nonvaccinates, and maintained to finish (P<0.001). Performance and RBC/WBC count showed no significant difference between groups. Vaccinates at 6-8 weeks showed better effect on decrease of clinical sign compared with vaccinates at 1-3 weeks and 3-5 weeks and nonvaccinates. Also, lung lesion assessment showed significant difference between vaccinates at 3-5 weeks and 6-8 weeks, and nonvaccinates and vaccinates at 1-3 weeks (P<0.05). Vaccinates at 3-5 score in comparison with other groups. In conclusion, these results suggested that vaccination at 3-5 weeks or later may be more effective than earlier vaccination.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.1
• /
• pp.108-115
• /
• 2000

This study was designed to compare the effect of polishing on surface roughness of composite resin. We used Z100(3M) composite resin and placed the composite resin in the hole (4mm thick and 4mm in diameter) of vinyl plate and polymerized it under manufacturer's instructions. Samples were divided into 5 groups by polishing methods. Group 1 was control: resin was polymerized under glass plate, Group 2: resin was polymerized without any polishing procedure, Group 3: resin was polymerized with a polishing procedure of abrasive disc, Group 4: bonding agent was applyed in thin layer and polymerized on the polished polymerized resin surface. Group 5: resin was polymerized under transparent celluloid strip. The surface roughness of each specimen was measured with Sufacoder SEF-30D (Kosaka lab. Ltd) under 0.08mm cut off, 0.05mm/s stylus speed, ${\times}40$ horizontal magnification, ${\times}5000$ vertical magnification. The results were as follows : 1. Group 1 showed the most smooth surface in this study. 2. Group 3 showed more rough surface than Group 2. Considering the surface roughness, it would be better to make the shape completely before polymerize the resin. To finish and polish after the polymerization of resin makes less smooth surface. 3. When we use the transparent celluloid strip, minimum finishing procedures are recommended. Any polishing procedure could not recover the smooth resin surface of celluloid strip. 4. Application and polymerization of the thin layer of bonding agent on the polished surface showed the minimum surface smoothing effect.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.1
• /
• pp.154-161
• /
• 2001

We have treated polyester fabric with $CF_4,\;C_2F_6,\;SF_6\;and\;C_3F_6$ glow discharge plasmas to develop functional fabrics which preserve moisture transportation and water proofing nature. Modified properties were evaluated by water vapor permeation rate and breakthrough water pressure. The change of surface morphology was observed by SEM. Fiber interstice of the plasma treated fabric was calculated as $0.32{\mu}{\textrm}{m}$, and this value was sufficiently ideal as water repellent material. The moisture transportation of ${CF_4}-treated$ fabric was good as much as untreated fabric, and those of $C_2$F(sub)6-treated, SF(sub)6-treated fabrics were reduced by 1~3%, and that of ${C_3F_6}-treated$ fabric was reduced by 15%. The best treatment condition were 0.06 torr 120 seconds in $CF_4$, 0.05 torr 30 seconds in $SF_6$, 0.08~0.15 torr 90 seconds in $SF_6$ and 0.1 torr 45 seconds in $C_3F_6$ respectively. The grade of moisture transportation effect was $CF_4>C_2F_6>SF_6>>C_3F_6$, and water proofing effect was $C_2F_6{\approx}CF_4>C_3F_6>SF_6$. It was observed by SEM that the thin film was formed on the surface of the treated substrate by the fluorocarbon plasma treatment.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.3
• /
• pp.101-106
• /
• 2002

This paper presents an experimental investigation of high speed machining of dies and molds. Several critical issues involved with the high speed machining of QRO90 tool steel of hardness up to HRc62, have been studied and explained from a detail analysis of experimental observations. The experiments were performed using ball end mills. The effect of different process parameters on tool life and surface finish produced was also investigated. The cutting parameters involved were; cutting speeds in the range of 100 to 40 / m/min, axial depth of cut from 0.1 to 0.5mm, pick feed of 0.1 to 0.5mm. Run out and acceleration signals were observed during the experiment to investigate cutting slates. Compressed air and flood coolant were used and the effect of coolant on tool life was also determined.

• The Research Journal of the Costume Culture
• /
• v.12 no.5
• /
• pp.737-742
• /
• 2004

The purpose of this study is restoration for tearing strength of the durable press (DP) finished 100% cotton fabric by enzymatic treatment. Dimethylol Dihydroxy Ethylene Urea (DMDHEU) was used as a DP finish chemical. Enzymes (cellulase, pectinase, protease, lipolase) were selected based on their specific reaction activities. Ideal application of the enzymes for this work was to remove cross-links created by DMDHEU on the surface of the fibers to offer migration property between microstructures of cellulose, yet cross-links that exist inside of the fibers are still remained to impart effect of wrinkle resistance. Physical characteristics (tearing strength, wrinkle recovery, FT-IR) of enzyme treated samples were measured and compared. It was found out that, in case of enzyme treatment, most of enzymes didn't have a great effect on tearing strength, but, in case of Protease, tearing strength increased at DMDHEU 2% treatment. As a result of an experiment on wrinkle recovery of the textiles treated with enzyme making density of DMDHEU different whenever respective experiment was made, it was discovered that density of DMDHEU increased as wrinkle recovery increased and, in the relation to enzyme treatment especially in Lipase enzyme treatment, the lesser density of DMDHEU, the more wrinkle recovery increased.

• Journal of the Korean Society of Physical Medicine
• /
• v.2 no.2
• /
• pp.143-150
• /
• 2007

Purpose : This article was a quasi-experimental study that applies to external -feedback weight-bearing training among hemiplegic patients with a stoke. Methods : It examined whether position sense and balance can improve fall efficacy and prevent a fall. The subject of study was divided in two; Experimental group had 18 people and control group had 16 people. It took 8 weeks to finish training. Experimental group provides external-feedback weight-bearing training for ten minutes after neurological treatment for 20 minutes and control group provides nerves treatment for 30 minutes. To find the effect of a fall assessed position sense, balance and fall efficacy of the lower limbs before the fact, after 4 weeks and 8 weeks. Results : According to the conclusions, external-feedback weight-bearing training to prevent a fall was more effective intervention in experimental group than in control group. Conclusion : This study suggests that external-feedback weight-bearing training is a intervention to prevent the fall of hemiplegic patients with a stroke effectively.

• Journal of Welding and Joining
• /
• v.29 no.5
• /
• pp.95-98
• /
• 2011

Recently, there is a growing tendency that fine-pitch electronic devices are increased due to higher density and very large scale integration. Finer pitch printed circuit board(PCB) is to be decrease insulation resistance between circuit patterns and electrical components, which will induce to electrical short in electronic circuit by electrochemical migration when it exposes to long term in high temperature and high humidity. In this research, the effect of soldering flux acting as an electrical carrier between conductors on electrochemical migration was investigated. The PCB pad was coated with OSP finish. Sn3.0Ag0.5Cu solder paste was printed on the PCB circuit and then the coupon was treated by reflow process. Thereby, specimen for ion migration test was fabricated. Electrochemical migration test was conducted under the condition of DC 48 V, $85^{\circ}C$, and 85 % relative humidity. Their life time could be increased about 22% by means of removal of flux. The fundamentals and mechanism of electrochemical migration was discussed depending on the existence of flux residues after reflow process.

• Journal of Industrial Technology
• /
• v.27 no.A
• /
• pp.111-120
• /
• 2007

This paper is results of experimental research on the effect of application of similarity related to permeability of soil on the consolidation behavior as centrifuge modeling of consolidation is performed with the centrifuge model facility. In this research, the permeability of soil was controlled by changing the viscosity of porewater as the mixed water with glycerin was used during the centrifuge model experiments. The effect of drainage path on consolidation was investigated by installing the vertical drains. A serise of centrifuge model tests with conditions of single vertical and radial horizontal drainage were carried out. Kaolinite and Jumunjin standard sand were used as soft clay and surcharges respectively during tests. For testing condition of single vertical drainage considering similarity of permeability, it was found that consolidation with mixed porewater with glycerin was delayed in comparisons sons with test results with water only. For conditions of horizontal drainage with vertical drains, a low permeability by changing the viscosity of pore water resulted in delayed degree of consolidation at an initial stage of consolidation. But, it predicted not much differences in settlement as long as the consolidation time was sufficiently long enough to finish consolidation. Consequently, it was found that similarity in permeability should be considered to be critical for the case of centrifuge model experiments related to consolidation with long drainage path.