• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2000년도 추계학술대회
• /
• pp.39-41
• /
• 2000

Newly modified spray Pyrolysis system was developed to Produce ultra Pure and fine Powder by spray Pyrolysis Process. In this system, raw material solution was effectively atomized and sprayed into the reaction furnace. Also, thermal decomposition process fully completed in the three zone reaction furnace, and produced powder was effectively collected. A technology to reduce impurities in complex acid solution below 20ppm was also developed. The characteristics of produced powder were studied by changing the reaction conditions such as reaction temperature, the injection velocity of the solution and air, nozzle tip size and concentration of solution. The morphology of powder had spherical shape under the most experimental conditions, and the composition and the particle size distribution were almost uniform. Under the most experimental conditions average particle size of most produced powder was below 100nm.

• 한국재료학회지
• /
• 제12권8호
• /
• pp.650-655
• /
• 2002

$SiO_2$ gels containing dispersed fine Te metal particles have been prepared by the sol- gel method using a starting solution containing Tetraethoxy Silane (Si($OC_2$ $H_{5}$ )$_4$), $H_2$O, Ethylalchol ($C_2$$H_{5}$OH), Nitric Acid ($HNO_3$) and Tellurium Tetracholoride ($TeCl_4$) in a several molar ratio. Gelling time of sols was about 3 days and viscosity of solution was very low about 2~3 cP for 3 days. Heat-treatments of the gel have been performed at 500, 700, 900, 1100 and $1300^{\circ}C$ for 1 hour, respectively. We have investigated TG-DTA, X-ray diffraction patterns and SEM of heat-treatmented gels. The size of Te fine particles dispersed in $SiO_2$ gel was about 0.8~1 $\mu\textrm{m}$ and the shape was almost quadrangle.

• 한국재료학회지
• /
• 제13권4호
• /
• pp.219-223
• /
• 2003

Zirconia gels dispersed with fine Au particles have been prepared by the sol-gel method. Starting solution with (OC$Zr_4$$H_{ 9}$)$_4$, $C_4$ $H_{9}$ OH, $H_2$O,$ HNO_3$, $HAuC1_4$ was used to prepare gels in several molar ratio. After hydrolysis, viscosity of solutions as 4∼5 cP and gelling time of sols were spent about 9 days. As the heat-treatment temperature was increased,$ ZrO_2$ had the phase transition from tetragonal to monoclinic at $750^{\circ}C$. Heat-treatments of the gel have performed at 500, 700, 750, 800, 1000 and $1100^{\circ}C$ for 3 hrs, respectively. We have investigated TG-DTA, X-ray diffraction patterns, SEM and EDS. The size of Au fine particles dispersed in the heat-treatmented gel was about 0.15∼0.23 $\mu\textrm{m}$ and the shape was most sphericity.

• Advances in concrete construction
• /
• 제2권1호
• /
• pp.13-27
• /
• 2014

The principal objective of this study is to deepen the characterization studies already led on sand concretes in previous works. Indeed, it consists in studying the effect of the sand type on the main properties of sand concrete: fracture and mechanical properties. We particularly insist on the determination of the fracture characteristics of this material which apparently have not been studied. To carry out this study, four different types of sand have been used: dune sand (DS), river sand (RS), crushed sand (CS) and river-dune sand (RDS). These sands differ in mineralogical nature, grain shape, angularity, particle size, proportion of fine elements, etc. The obtained results show that the particle size distribution of sand has marked its influence in all the studied properties of sand concrete since the sand having the highest diameter and the best particle size distribution has given the best fracture and mechanical properties. The grain shape, the angularity and the nature of sand have also marked their influence: thanks to its angularity and its limestone nature, crushed sand yielded good results compared to river and dune sands which are characterized by rounded shape and siliceous nature. Finally, it should further be noted that the sand concrete presents values of fracture and mechanical properties slightly lower than those of ordinary concrete. Compared to mortar, although the mechanical strength is lower, the fracture parameters are almost comparable. In all cases, the sand grains are debonded from the paste cement during the fracture which means that the crack goes through the paste-aggregate interface.

• 한국재료학회지
• /
• 제17권1호
• /
• pp.50-55
• /
• 2007

Ultra-fine Copper powder for a conductive paste in electric-electronic field have been synthesized by chemical reduction of aqueous $CuSO_4$ with hydrazine hydrate $(N_2H_4{\cdot}H_2O)$ as a reductor. The effect of reaction conditions such as dispersant and reaction temperature on the particle size and shape for the prepared Cu powders was investigated by means of XRD, SEM, TEM and TGA. Experiments showed that type of dispersant and reaction temperature were affected on the particle size and morphology of the copper powder. When the carboxymethyl cellulose (CMC) was added as a dispersant the relative mono-dispersed and spherical Cu powder was obtained. Cu powders with particle size of approximately 140nm and narrow particle size distribution were obtained from 0.3M $CuSO_4$ with adding of 0.03M CMC and 40ml $N_2H_4{\cdot}H_2O$ at a reaction temperature of $70^{\circ}C$.

• 한국세라믹학회지
• /
• 제31권9호
• /
• pp.989-994
• /
• 1994

This study aims at finding the closest packings of regular shape particles such as sphere, circle rod and hexagonal rod type. As the ratio of particle size to container lowered to less than 1/10, the wall effect decreased gradually. The tap density of spherical particles with almost orthorhombic arrangement was 59.5%, while those of circle rod and hexagonal rod type particles were 63.5% and 63.0% respectively. And it was decreased with increasing the aspect ratio of regular particles. The tap density of binary mixtures was larger than that corresponding to the monosized particles packing by about 15%. The tap density of ternary mixtures was larger than that of corresponding to the packing of binary mixtures by about 9%. This work employed the binary mixture of 60% coarse particles and 40% fine particles with size ratio of 1.0 to 1/10 and the ternary mixture of 60% coarse particles, 20% medium and 20% fine particles with size ratio of 1:1/10:1/400 respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권4호
• /
• pp.523-532
• /
• 1999

This study is aimed to obtain fundamental knowledge of pulse laser welding phenomena the authors investigated the structure and composition of evaporated particles of Al alloys in air and in the Ar atmosphere during pulsed laser welding. The ultra-fine particles of 5 to 100nm diameter in a globular or irregular shape were formed in laser-induced plasma and the main structure was $MgAl_2O_4$ The composition of particles was ifferent depending on the power density of a laser beam; namely under the low power density conditions magnesium was predominant in the parti-cles while aluminium content increased with an increase in the power density. These results were attributed to evaporation phenomena of metals with different boiling points and latent heats of vaporization. On the other hand the number density of laser-induced plasma species was obtained by Saha's equation. it was confirmed that the number density depends upon the plasma tempera-ture and total pressures.

• 펄프종이기술
• /
• 제36권2호
• /
• pp.24-32
• /
• 2004

Toner used in xerographic printing process is hydrophobic powder with low surface energy. The toner ink film fused on paper surface can be efficiently detached from a fiber surface during pulping, but it does not fragment again into fine toner particles. Ink agglomerates that result have too large particle size to be deinked by flotation. The purpose of this study is to enhance toner agglomeration using 1-octadecanol for improving the toner removal by screening. The effect of pH, pulping temperature, and 1-octadecanol on toner agglomeration and removal by screening was investigated using image analysis methods. Results showed that the size of toner agglomerates increased substantially when pulping was carried out at high temperature under acidic condition. When toner agglomerates showed spherical shape, the particle removal efficiency of screening was improved.

• Bulletin of the Korean Chemical Society
• /
• 제20권9호
• /
• pp.1035-1039
• /
• 1999

Manganese-activated zincgallate (Zn1-xMnxGa2O4) phosphor as a green phosphor was readily prepared by coprecipitation in aqueous basic solution of metal salts. The obtained product converted to amorphous zincgallate even at 300℃, followed by crystallization at 1000 ℃. The pyrolyzed phosphor showed fine particle, then reduction treatment at 900 ℃ changed into homogeneous shape with slight grain growth(particle size less than 0.5 mm). The photoluminescence characteristics of the zincgallates have been investigated as a function of dopant concentrations, reducing atmospheres and temperatures. Under UV excitation the phosphors displayed the highest green emission efficiency at 504 nm when the specimen oxidized at 1000 ℃ was reduced at 900 ℃ in a mild hydrogen atmosphere (97% N2, 3% H2) with a flow rate of 100 ml/min.

• 전기화학회지
• /
• 제11권4호
• /
• pp.268-272
• /
• 2008

본 연구에서는 $LiFePO_4$의 입자크기를 조절함으로써 우수한 전극특성을 나타낼 수 있도록 최적의 입자크기($50{\sim}100\;nm$)를 가지는 $LiFePO_4$ 양극 활물질을 전기방사법을 이용하여 합성하였다. XRD 분석결과 FeP, $Fe_2P$ 등의 불순물이 존재하지 않는 Pnma의 공간군을 가지는 잘 발달된 사방정 구조의 $LiFePO_4$가 합성됨을 확인하였으며, SEM 분석을 통하여 시료의 입자형태 및 크기를 관찰하였다. $0.1\;mA/cm^2$의 전류밀도와 $2.8{\sim}4.0\;V$의 전위영역에서 충 방전 테스트 수행시 135 mAh/g의 초기 방전용량을 나타내었으며, 50 싸이클 후에도 99.9% 이상의 용량 보존율을 보이는 우수한 싸이클 특성을 나타내었다.