• Journal of the Korean earth science society
• /
• v.24 no.1
• /
• pp.7-21
• /
• 2003

The state-of-art third generation wave prediction model WAM was applied to the Korean seas for a winter monsoon period of January 1997. The wind field used in the present study is the global NSCAT-ERS/NCEP blended winds, which was further interpolated using a bi-cubic spline interpolator to fine grid limited area shallow water regime surrounding the Korean seas. To evaluate and investigate the accuracy of WAM, the hindcasted wave heights are compared with observed data from two shallow water buoys off Chil-Bal and Duk-Juk. A detailed study has been carried with the various meteorological parameters in observed buoy data and its inter-dependency on model computed wave fields was also investigated. The RMS error between the observation and model computed wave heights results to 0.489 for Chil-Bal and 0.417 for Duk-Juk. A similar comparison between the observation and interpolated winds off Duk-Juk show RMS error of 2.28 which suggest a good estimate for wave modelling studies.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.6 no.1
• /
• pp.109-116
• /
• 1994

Tsunamis generated by of the 1992 Flores Island Earthquake in Indonesia caused tremendous casualties and damages. This tsunami event was hindcasted via numerical tsunami models. Initial conditions were taken from fault parameters from Havard CMT (Centroid Moment Tensor) solution and additional subaqueous slump consideration at the Inner Hading Bay and Riang Krok, Leworahang coasts. The computed results showed general agreements with observations made by the International Tsunami Survey Group. Subsequently a runup model was developed to investigate catastrophic runup at southern shore of the Babi Island with fine grid resolution of 50 m. Computed results were recorded to construct rendered images for video animation. The computer-graphic aided video animation showed a remarkable reproduction of tsunami propagation and runup at southern coast of the Babi Island.

• International Journal of Aeronautical and Space Sciences
• /
• v.12 no.2
• /
• pp.149-155
• /
• 2011

The viscous flow in an axisymmetric nozzle was analyzed while accounting for the mesh sizes in both in the free stream and the boundary layer. The Navier-Stokes equations were resolved using the finite volume method in order to determine the supersonic flow parameters at the exit of the converging-diverging nozzle. The numerical technique in the aforementioned method uses the flux vector splitting of Van Leer. An adequate time stepping parameter, along with the Courant, Friedrich, Lewis coefficient and mesh size level, was selected to ensure numerical convergence. The boundary layer thickness significantly affected the viscous flow parameters at the exit of the nozzle. The best solution was obtained using a very fine grid, especially near the wall at which a strong variation of velocity, temperature and shear stress was observed. This study confirmed that the boundary layer thickness can be obtained only if the size of the mesh is lower than a certain value. The nozzles are used at the exit of the shock tube in order to obtain supersonic flows for various tests. They also used in propulsion to obtain the thrust necessary to the displacement of the vehicles.

• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.2
• /
• pp.137-150
• /
• 2010

A meso-urban meteorological model (Urbanized MM5; uMM5) with urban canopy parameterization (UCP) was applied to the high-resolution simulation of meteorological fields in a complex coastal urban area and the assessment of urban impacts. Multi-scale simulations with the uMM5 in the innermost domain (1-km resolution) covering the Busan metropolitan region were performed during a typical sea breeze episode (4~8 August 2006) with detailed fine-resolution inputs (urban morphology, land-use/land-cover sub-grid distribution, and high-quality digital elevation model data sets). An additional simulation using the standard MM5 was also conducted to identify the effects of urban surface properties under urban meteorological conditions. Results showed that the uMM5 reproduced well the urban thermal and dynamic environment and captured well the observed feature of sea breeze. When comparison with simulations of the standard MM5, it was found that the uMM5 better reproduced urban impacts on temperature (especially at nighttime) and urban wind flows: roughness-induced deceleration and UHI (Urban Heat Island)-induced convergence.

• Journal of Environmental Impact Assessment
• /
• v.16 no.6
• /
• pp.421-432
• /
• 2007

To investigate temporal and spatial variations of hydrodynamics and environmental conditions in Gyeonggi Bay, including Han River estuary, numerical experiments were performed using 3-dimensional fine grid numerical ocean model. The model successfully reproduced the physical phenomena already known in Gyeonggi Bay where tide and fresh water discharge are dominant forcings. The calculated harmonic constants of tide and tidal current agreed well with those of observations at nine tide stations and two tidal current stations. Tidal asymmetries along the Yeomha Waterway, mainly caused by non-linear effect, were well reproduced and agreed well with observations. Time series of salinity at four stations(A, B, C and D) and horizontal distributions of monthly averaged salinity show that Gyodong and Seokmo Waterways play an important role in fresh water discharge into the Gyeonggi Bay rather than Yeomha Waterway.

• Atmosphere
• /
• v.20 no.1
• /
• pp.13-26
• /
• 2010

The Urban Canopy Model (UCM) implemented in WRF model is applied to improve urban meteorological forecast for fine-scale (about 1-km horizontal grid spacing) simulations over the city of Seoul. The results of the surface air temperature and wind speed predicted by WRF-UCM model is compared with those of the standard WRF model. The 2-m air temperature and wind speed of the standard WRF are found to be lower than observation, while the nocturnal urban canopy temperature from the WRF-UCM is superior to the surface air temperature from the standard WRF. Although urban canopy temperature (TC) is found to be lower at industrial sites, TC in high-intensity residential areas compares better with surface observation than 2-m temperature. 10-m wind speed is overestimated in urban area, while urban canopy wind (UC) is weaker than observation by the drag effect of the building. The coupled WRF-UCM represents the increase of urban heat from urban effects such as anthropogenic heat and buildings, etc. The study indicates that the WRF-UCM contributes for the improvement of urban weather forecast such nocturnal heat island, especially when an accurate urban information dataset is provided.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.26 no.2
• /
• pp.101-109
• /
• 1998

Recently, improvement of the quality of urban riverscape environment has been emphasized not only by landscape architectural field but also by various professionals in planning and ecology. Regarding to this current movement, the aim of this paper is to highlight major visual elements of riverscape axis as a case study of Shinchon River in Taegu City to suggest some basic guidelines for arranging riverscape in urban area. The study was mainly based on Repertory Grid Development method which was developed in Japan. The method is consist of three steps such as decision of element landscape in study area for slide photos, selection of evaluation items for interview and obstraction of proper evaluation factors. The major findings through this study are as follows; 1) The 12 major visual elements which possibly improve riverscape, based on abstraction of proper evaluation factors, are Dunchi, surface of the water,, equipment of river, buildings near riverside, river vertical and horizontal facilities like bridge, fine view, riverbed, water plant, naturalness, water's edge line, harmony and street trees by order. 2) Total numbers of adjective which describe 12 common factors are 25, such as clean, open, stable, quiet, comfortable, friendly, bright, natural etc. In addition, Dunchi was described 337 times by various adjectives, surface of the water was 200 times and arrangement of river was 146 times which is similar result with the order of 12 influential common factors. 3) Therefore, Dunchi, surface of the water and equipment of river are three most important factors which could create better riverscape. These three factors implies us how we supply good quality of urban river environment for the urban residents.

• Design & Manufacturing
• /
• v.10 no.3
• /
• pp.1-7
• /
• 2016

In the semiconductor industry the memory and chip were developed to high density memory and high performance chip, so circuit design was also high integrated and the test bed was needed to be thin and fine pitch socket. LGA(Land Grid Array) IC socket with thin wall thickness was designed to satisfy this requirement. The LGA IC socket plastic part was manufacture by injection molding process, it was needed accuracy, stiffness and suit resin with high flowability. After injection molding process the side gates were needed to remove for further assembly process. ln this study, the cold press cutting process was applied to remove the gates. For design of punch and die, the cold press cutting analysis was implemented by$DEFORM-2D^{TM}$ ln consideration of the simulation results, an adequate punch and die was designed and made for the cutting unit. In order to verify the performance of cutting process, the roughness of cutting section of the part was measured and was satisfied in requirement.

• Journal of the Korean Society of Safety
• /
• v.31 no.1
• /
• pp.105-110
• /
• 2016

Mountainous disasters such as landslides and debris flow are difficult to forecast. Debris flow in particular often flows along the valley until it reaches the road or residential area, causing casualties and huge damages. In this study, the researchers selected Seoraksan National Park area located at Inje County (Inje-gun), Gangwon Province-where many mountainous disasters occur due to localized torrential downpours-for the damage reduction and cause analysis of the area experiencing frequent mountainous disasters every year. Then, the researchers conducted the field study and constructed geospatial information data by GIS method to analyze the characteristics of the disaster-occurring area. Also, to extract more precise geographic parameters, the researchers scanned debris flow triggering area through terrestrial LiDAR and constructed 3D geographical data. LiDAR geographical data was then compared with the existing numerical map to evaluate its precision and made the comparative analysis with the geographic data before and after the disaster occurrence. In the future, it will be utilized as basic data for risk analysis of mountainous disaster or disaster reduction measures through a fine-grid topographical map.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.29 no.4
• /
• pp.53-66
• /
• 2001

Modern art has had a great impact on the concepts and the formal attributes of modern landscape design. This study aimed at examining the origins of modern landscape design languages especially in relation to the influence of find art during the modernist age. The formal reductionism of Cubistic paintings finally lead to the formulation of Geometrical Abstractionism which became the basic formal model for ˝Regular Style˝; one of the representative modern landscape style. This Regular Style is mostly based on the formal structure of ´Grids´, which was developed by many landscape designer like Eckbo, Kley and Halprin. On the other hand, the ´Bio-morphic Form´ originally used in Surrealistic Art became the formal model for ˝Organic Style˝; the other representative modern landscape style, developed mostly by the landscape designers like Church, Burle-Mark and Bye. Thus, ´Grids´ and ´Bio-morphic Form´ became the dual icons of modern art and modern landscape design. Although these modern landscape design styles were ground breaking departure from the conventional formal/informal tradition and expanded possibilities in formal experimentations, They also produced several crucial limitations originated from the scientific reductionism and autonomous aesthetics of modern art, like the physical and cultural discontinuation from surrounding environments and the formal alienation from the real life world, which gave rise to the emergence of post-modern thinking of landscape design.