• 한국구조물진단유지관리공학회 논문집
• /
• 제15권3호
• /
• pp.178-185
• /
• 2011

본 연구는 강모래와 부순 모래를 일반적인 혼합방법과 아스팔트 골재 혼합에 사용되는 Driscoll 방법으로 각각 혼합하여 그 특성을 알아보고, Driscoll 방법의 콘크리트용 골재에 대한 적용성을 판단하고자 하였다. 이에 따라 일반혼합과 Driscoll 방법으로 혼합한 골재의 조립율 및 입도곡선, 굳지 않은 콘크리트의 특성 중 슬럼프와 공기량 및 굳은 콘크리트의 특성 중 28일 압축강도 시험을 통해 혼합방법의 따른 특성을 알아보고자 하였다. 아스팔트 골재의 혼합에 사용되는 Driscoll 방법을 사용하여 콘크리트 골재를 혼합하였을 때 일반적인 혼합방법과 비교하여 슬럼프, 공기량, 28일 압축강도가 오차수준 정도의 미미한의 차이를 나타내었다. 따라서 아스팔트 골재 혼합에 사용되는 Driscoll 방법은 콘크리트용 잔골재의 혼합에도 적용 가능할 것으로 판단된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.157-160
• /
• 2006

Recently, trouble of sand supply is occurred according to exhaustion of natural sand resources. To solve this problem, sea sand and crushed sand are used. But, necessity of water reducing agent because quality of concrete that use sea sand and crushed sand is deteriorated. Therefore in this study was examined on the engineering properties of concrete with kind of fine aggregate and addition ratio of water reducing agents. As a result, compressive strength appeared similar standard regardless of kind of fine aggregate. Compressive strength, durability was similar in decrease of the unit water content by increase of addition ratio of the water reducing agent. Also, drying shrinkage resistivity was improved because the unit water content decreased.

• 한국건축시공학회지
• /
• 제2권3호
• /
• pp.115-121
• /
• 2002

The purpose of this study is investigating characteristics of paper-ash mortar according to partial replacement of fine aggregate by Paper-ash. For this purpose, selected test variables were mixing ratio with two levels of mortar(1:2, 1:3), and 3 types of paper-ash(A, B, C), and paper-ash content with four levels(5%,, 10%, 15%, 20%). As a result of this study, in all mixes with partial replacement of fine aggregate by Paper-ash generally Produced Paper-ash mortar with decreased compressive strength at ail age as compared to ordinary mixes. The mixing rate 1:2 was the higher increasing rate of strength than the mixing rate 1:3. The flow value and unit weight of paper-ash mortar were decreased with increasing of the paper-ash content. And the thermal conductivity of the thermal conductivity of the paper-ash mortar was lower than normal mixing without paper-ash.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.403-404
• /
• 2009

본 연구는 CLSM(Controled Low-Strength Materials)의 고유동화에 필요한 분체량과 경제적을 고려하기 위하여 산업부산물인 Reject Ash의 사용량 변화와 순환모래(고품질, 저품질)와 부순모래, 공기량 변화에 따른 CLSM의 물리적 특성을 분석하여 고유동 CLSM에서의 Reject Ash와 순환모래의 활용성을 검토하였다.

• KCI Concrete Journal
• /
• 제11권3호
• /
• pp.19-28
• /
• 1999

This study treated self-compacting high Performance concrete as two Phase materials of Paste and aggregates and examined the effect of powder and aggregates on self-compacting high performance, since fluidity and segregation resistance of fresh concrete are changed mainly by paste. To improve the fluidity and self-compactibility of concrete, optimum powder ratio of self-compacting high performance concrete using fly ash and blast-furnace slag as powders were calculated. This study was also designed to provide basic materials for suitable design of mix proportion by evaluating fluidity and compactibility by various volume ratios of fine aggregates, paste, and aggregates. As a result, the more fly ash was replaced, the more confined water ratio was reduced because of higher fluidity. The smallest confined water ratio was determined when 15% blast-furnace slag was replaced. The lowest confined water ratio was acquired when 20% fly ash and 15% blast-furnace slag were replaced together. The optimum fine aggregates ratio with the best compactibility was the fine aggregate ratio with the lowest percentage of void in mixing coarse aggregate and fine aggregate In mixing the high performance concrete. Self-compacting high performance concrete with desirable compactibility required more than minimum of unit volume weight. If the unit volume weight used was less than the minimum, concrete had seriously reduced compactibility.

• 한국지반환경공학회 논문집
• /
• 제16권11호
• /
• pp.39-43
• /
• 2015

본 연구에서는 압밀 배수를 촉진하기 위한 공법에서 사용되는 조립토나 골재로의 세립토 관입 정도를 다양한 조건에서 실험을 통해 확인하여 세립토의 조립토나 골재로의 관입특성을 규명하였다. 지중응력에 대응하는 압력의 크기나 세립토 함수비의 변화에 상관없이 해성점토가 해사나 표준사로는 관입되지 않아 모래 배수/말뚝 체에서의 배수저항 현상은 전혀 발생하지 않은 것으로 확인되었고, 오히려 물다짐에 의한 모래 배수/말뚝 체의 전단강도가 크게 증대한 것으로 보인다. 골재의 경우에는 골재의 입경이 클수록 해성점토의 관입깊이는 증대하고, 같은 골재라도 압력이나 함수비가 클수록 해성점토의 관입깊이는 증대함을 알 수 있었으며, 액성한계보다 작은 함수비를 갖는 해성점토는 입자가 작은 편인 13mm 골재로의 관입깊이가 현저하게 줄어들어 그 관입깊이가 상당히 적다 하더라도 일단 관입된 세립토에 의해 배수/말뚝 체에서의 배수저항 현상이 발생할 것으로 사료된다. 따라서 자연함수비가 액성한계보다 큰 매우 연약한 세립토층에서는 모래보다 큰 입경을 갖는 쇄석이나 자갈 등 골재를 사용하는 gravel drain 공법 및 gravel compaction pile 공법 등의 적용을 지양해야 하고, 자연함수비가 액성한계보다 작은 연약한 세립토 지반에서도 gravel drain 공법 및 gravel compaction pile 공법 등과 같은 연직배수공법을 적용할 경우 그 효용성은 크게 저하할 것으로 사료된다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권2호
• /
• pp.51-58
• /
• 2018

본 연구는 콘크리트 산업에 있어 자원 고갈, 환경 문제 등을 대처할 수 있는 순환골재의 활용을 촉진하며 순환골재콘크리트의 레미콘 실생산을 위한 기초적 연구로서, 순환골재 사용량에 따른 슬럼프 고정 순환골재콘크리트의 물시멘트비 변화 및 물리적 특성을 실험하고 그 결과를 회귀분석하여 순환골재콘크리트의 압축강도 추정을 위한 단위시멘트량, 순환골재의 사용량, 물시멘트비 등 레미콘 생산 조건을 검토하여 다음과 같은 결론을 얻었다. 순환골재를 사용한 콘크리트는 목표 슬럼프를 유지하기 위해서는 단위수량 증가가 요구되며, 순환굵은골재보다 순환잔골재의 치환에 더 많은 단위수량의 증가가 필요하였다. 순환잔골재의 치환율은 60%이하는 레미콘 품질기준에 벗어나지 않는 공기량 확보가 가능하였다. 순환골재를 사용한 콘크리트의 압축강도는 순환골재의 치환율이 증가할수록 감소하는 것으로 나타났으며, 특히 순환잔골재를 100% 치환한 경우 압축강도는 25%정도 저하하였다. 순환골재를 사용한 콘크리트의 배합인자에 따른 압축강도의 상관관계를 분석한 결과, 순환잔골재>물시멘트비>공기량 순으로 영향을 미치는 것으로 나타났다.

• 레미콘
• /
• 10호통권69호
• /
• pp.2-11
• /
• 2001

This paper describes the feasiblity of recycling sewage dredged soils as fine affrefate. This paper describes the feasibility of recycling sewage dredged soils as fine aggregate. The specific gravity of the dredged soils was smaller than that of sand due to the effect of dredged sludge. However, the grain size distribution of the dredged soils is relative well graded, and the results of the heavy metal concentration from the leaching test of the dredged soils was significantly lower than the requirements of the allowable criteria. Therefore, the effect of recycling of dredged soils on environment the as fine aggregate was negligible. Also, the specific gravity of the dredged and washed soils was similar to that of sand, and the dredged and washed soils for the most part showed lower heavy metal leaching characteristics than those of dredged soils, Also, the results of the study for evaluation the recycling feasibility of dredged and washed soils as fine affrefate. The organic impurity content of the dredged and washed soils was lower than the requirements of the Korean industrial Standards, and the mortar compressive strength using the washdredged soils also met those of the Korean industrial Standards. And, the strengths of the dredged and washed soils were over 95% of those of the NaOH-treated samples. Therefore, it is expected that the dredged soils will be able to be an alternative for fine aggregate.

• Advances in materials Research
• /
• 제11권4호
• /
• pp.251-277
• /
• 2022

Disposal of industrial waste in cities where municipal authorities permitting higher floor area ratio coupled with increasing living standards, a lot of demolition waste is being generated. Its disposal is a challenge particularly in megacities where no landfills are available. The ever-increasing cost of building construction materials also necessitates consuming demolition wastes in a useful manner to save fresh natural raw materials. In the present work, the crushed waste glass is used in high-strength concrete as a partial replacement of fine aggregate. The control concrete of grade M60 was proportioned following BIS 10262-2009. The crushed waste glass has been used as a partial replacement with varying percentages of 10, 20, 30, and 40% by weight of fine aggregate. Experimental tests were carried on the fresh and hardened state of the concrete. The effect of crushed waste glass on the workability of the concrete has been investigated. Non-destructive tests, acid attack tests, compressive strength, split tensile strength, and X-ray diffraction analysis was carried out for the control concrete and concrete containing crushed waste glass after 7, 28, and 270 days of normal curing. The results show that for the same w/c ratio, the workability of concrete increases with increasing replaced crushed waste glass content. However, the decrease in compressive strength of the concrete after 28 days of normal curing and further after 28 days of acid attacks, up to 30% replacement level of fine aggregate by the crushed waste glass is insignificant.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.743-746
• /
• 2004

This research investigates experimentally an effect on the properties of the high flowing concrete according to variations of concrete materials and site conditions. Variations of sensitivity test are selected items as followings; (1)Concrete temperature, (2)Unit water(Surface moisture of fine aggregate), (3)Fineness modulus of fine aggregate, (4)Addition ratio of high-range water reducing agent. And fresh conditions of the high flowing concrete should be satisfied with required range including slump flow$(65{\pm}5cm)$, 50cm reaching time of slump flow$(4\~10sec)$, V-box flowing time$(10\~20sec)$, U-box height(min.300mm) and air content$(4{\pm}1\%)$. As results of sensitivity test, material variations and site conditions should be satisfied with the range as followings; (1)Concrete temperature is $10\~20^{\circ}C$ (below $30^{\circ}C$), (2)Surface moisture of fine aggregate is within ${\pm}0.6\%$, (3)Fineness modulus of fine aggregate is $2.6{\pm}0.2$ and (4)addition ratio of high range water reducing agent is within $1\%$ considered flow-ability, self-compaction and segregation resistance of the high flowing concrete.