• 한국안전학회지
• /
• 제16권1호
• /
• pp.65-72
• /
• 2001

Portland cement concrete is made with coarse aggregate, fine aggregate, portland cement, water and, in some cases, selected chemical admixture such as air-entraining agents, water reducer, superplasticizer, and so on, and mineral admixture such as fly ash, silica fume, slags, etc. Typically, in the concrete, the coarse aggregate and fine aggregate will occupy approximately 80 percent of the total volume of the finished mixture. Therefore, the coarse and fine aggregates affect to the properties of the portland cement concrete. As the deposits of natural sands have slowly been depleted, it has become necessary and economical to produce crushed sand(manufactured fine aggregate). It is reported that crushed sand differs from natural sands in gradation, particle shape and texture, and that the content of micro fines in the crushed sand affect to the quality of the portland cement concrete. Therefore, the purpose of this paper is to investigate the characteristics of fresh and hardened concrete with higher micro fines. This study provides a firm data to apply crushed sand with higher micro fines.

• 대한건축학회논문집:구조계
• /
• 제36권1호
• /
• pp.155-162
• /
• 2020

The aim of the research is to investigate the fundamental properties and heat of hydration reducing performance of the fly ash incorporated concrete mixture when the coal gas slag (CGS) from integrated gasification combined cycle (IGCC) is used as fine aggregate. From the results of the experiment, the workability was generally increased and the air content was decreased up to one to four percent with increasing the replacing ratio of CGS to fine aggregate. The compressive strength was similar or increased within five percent to the Plain mixture when the CGS was used as a fine aggregate. When the CGS and fly ash were used same time, the heat of hydration reducing performance was improved than single using cases either CGS or fly ash. Based on the results, for the concrete mixture using CSG as a portion of the combined fine aggregate, the general properties were improved and heat of hydration was decreased approximately 16 % when the fly ash was replaced 30 % to cement and the CGS was replaced less than 50 % to fine aggregate.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.73-78
• /
• 2001

Portland cement concrete is made with coarse aggregate, fine aggregate, portland cement, water and, in some cases, selected chemical admixtures such as air-entraining agents, water reducer, superplasticizer, and so on, and mineral admixtures such as fly ash, silica fume, slags, etc. Typically, in the concrete, the coarse aggregate and fine aggregate will occupy approximately 80 percent of the total volume of the final mix. Therefore, the coarse and fine aggregates affect to the properties of the portland cement concrete. As the natural sands are drained, it is necessary and economical to utilize crushed sands(manufactured fine aggregate). It is reported that crushed sands differ from natural sands in gradation, particle shape and texture, and the micro fines in the crushed sands affect to the quality of the portland cement concrete. Therefore, the purpose of this paper is to investigate the characteristics of fresh and hardened concrete with high content of micro fines. This study provides firm data for the use of crushed sands with higher micro fines.

• 한국건설순환자원학회논문집
• /
• 제6권3호
• /
• pp.88-93
• /
• 2011

천연골재의 고갈 및 환경규제에 의한 건설용 잔골재의 수급불균형 문제를 해결하기 위해 폐기콘크리트로부터 생산된 순환잔골재의 적용성을 위한 연구들이 수행되어 왔다. 본 연구의 목적은 W/C 및 단위수량의 변화에 따른 순환잔골재를 사용한 콘크리트의 역학적 특성 및 내구성능에 관한 이해를 높이는 것이다. 또한, 순환콘크리트의 구조적 적용을 위한 기초자료를 제시하는데 의미가 있다. 특히, 순환잔골재를 100% 대체한 순환콘크리트에 대하여 W/C 및 단위수량의 변화에 따른 영향은 공기량, 슬럼프, 응결시간, 압축강도, 인장강도, 탄산화 및 염화물 침투와 같은 항목에 대한 시험결과에 의해 분석 제시되었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.53-56
• /
• 2000

The performance of high-strength concrete is controlled by the fact, affecting the quality management, especially by revision error in water content of the ratio of surface moisture in fine aggregate. The difference in water content results from the revision error of the ratio of surface moisture and errors in sampled aggregate in the processing ready-mixed concrete plant. This study is to investigate the properties of flowing and hardening by investionally varying the revision error of the ratio of surface moisture in fine aggregate to compare and analyze the variance in quality.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.235-236
• /
• 2011

This study analyzed flowing and strength properties of mortar depending to fine aggregate types and replacement ratio by using blast furnace slag, red mud, and silica fume that are industrial by products. The findings showed that higher replacement level of fine aggregate increased air content while decreased table flow. In addition, compressive strength showed that the higher replacement level was regardless of fine aggregate types, the lower strength became. Mortar substituted by the dredged sand showed high strength.

• 한국건축시공학회지
• /
• 제14권1호
• /
• pp.11-20
• /
• 2014

This research examined the effect of the quality of aggregate on concrete workability and compressive strength through an investigation into regional aggregate used in domestic ready mixed concrete plants. Through the research, it was found that aggregate for ready mixed concrete shows poor quality overall. The main factor of deterioration in the quality of the concrete is the particle size of fine aggregate and fine particle content in coarse aggregate. The quality of aggregate significantly influences concrete's workability, which is defined based on 0.08mm passage related with powder and absorption. In addition, poor aggregate quality leads to increased water content in concrete to secure workability, which is related with a decline in the compressive strength and durability of concrete.

• 한국건설순환자원학회논문집
• /
• 제4권2호
• /
• pp.157-164
• /
• 2016

본 연구에서는 고로슬래그 미분말 다량 치환한 시멘트 모르타르의 자극재로 탈황석고(FGD)를 사용한 경우, FGD에 포함되어 있는 활성탄의 제거로 체가름방법과 고온가열 조건을 원분과 비교하고, 또한 골재로서 순환골재(RFA)와 천연골재(NFA)를 사용하는 골재종류 변화 조건에서 각종 품질특성을 검토하였다. 실험결과 FGD의 활성탄 제거방법은 $500^{\circ}C$ 고온가열보다 0.3mm 체가름법이 우수하였고, FGD 치환율은 5~10%일 때, 잔골재는 NFA보다 RFA에서 비교적 양호한 결과를 얻을 수 있었다. 그러나 RFA를 이용한 모르타르의 경우는 실무 활용시 건조수축 길이변화율 및 흡수율 측면에서는 용도제한 및 별도의 품질향상 대책이 요구되었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.597-600
• /
• 2008

본 연구에서는 순환잔골재를 사용하므로써 세척사 사용으로 인한 염화물량 증가에 대응하고 아울러 한정적으로 사용되고 있는 순환골재 사용의 활성화를 위해 기초적 물성을 검토하였다. 또한, 고로슬래그 미분말이 가지고 있는 단점인 초기강도 저하 및 변색의 문제점을 예방하기 위해 석회석 미분말을 Filler역할로써 초기강도에 기여할 목적으로 특성을 검토하였다. 실험방법으로는 예비실험을 통하여 세척사의 염화물량의 현수준 파악 및 LSP의 기초물성 실험을실시하여 치환율 범위를 설정하였으며. 본 실험에서는 배합인자를 16Factor로 나누어 슬럼프, 공기량,압축강도, 염화물 함유량을 측정하였다. 실험결과, 압축강도는 배합인자 B-b인 순환잔골재 10%, 석회석 미분말 20% 치환시 가장 높은 압축강도 값을 나타냈으며, 순환잔골재 치환율 증가에 따라 염화물량은 0.127㎏/m$^3$(치환율0%), 0.119㎏/m$^3$(치환율10%), 0.112㎏/m$^3$(치환율20%), 0.097㎏/m$^3$(치환율30%)로 저감되었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.21.2-274
• /
• 1999

This study aims to examine the influence of the unit powder content of concrete and the fine aggregate ration of high flowing concrete after the improvement of grain shape of the coarse aggregate. According to the experimental results, flowbility and compating of concrete presents the best states in the S/a which has the smallest void ratio. The coarse aggregate after improvement of grain shape has been changed from 0.68 circular ratio of disc shape to 0.73 circular shape. It lead to be down 6% of fine aggregate ratio (from 47% to 41%), which is satisfactory to compacting. Also, the improvement of grain shape of the coarse aggregate lead the lowest unit powder content to be down 60kg/㎥ from (530kg/㎥ to 470kg/㎥). And about 11% unit water content can be reduced as unit powder conent is down.