• Journal of the Korea Institute of Building Construction
• /
• v.19 no.6
• /
• pp.477-484
• /
• 2019

The purpose of this study is to present basic data for developing concrete with EMP shielding as the structure materials when constructing an EMP shielded building structure. In order to use metal-based recycled aggregates with excellent conductivity and easy procurement for EMP shielding concrete, an evaluation of the stability evaluation and EMP shielding performance was performed. Through the stability evaluation, it was found that the coarse aggregate stability criterion was satisfied, but the oxidized slag did not satisfy the fine aggregate stability criterion, the oxidized slag is not satisfied. In addition, as a result of fresh concrete, the workability is increased and the air volume is decreased. The compressive strength is increased due to the high density and coarse granularity of the recycled aggregates, which increased the cement paste and adhesion, thereby increasing the compressive strength. The results of an EMP shielding test show that aggregates with high shielding performance are electronic arc furnace(EAF) Oxidizing Slag and Cooper Slag. The shielding performance is expected to increase if the average particle size of aggregate is small or uniformly distributed.

• Resources Recycling
• /
• v.22 no.2
• /
• pp.62-70
• /
• 2013

Electric arc furnace slag is made in ironworks during steel refining, it is been increasing chemical and physical resistibility using ageing method of unstable state of melting steel slag for using concrete's fine aggregates. Which is been changing stable molecular structure of aggregates, it restrains moving of ion and molecule. In Korea, KS F 4571 has been prepared for using the electric arc furnace slag to concrete aggregates. In this study, Electric arc furnace slag is used in the PMC(Polymer Modified Concrete) which is applied a bridge pavement of rehabilitation, largely. In that case, this study evaluates the structural safety about increasing the specific weight. The 4-type bridges(RC slab bridge, RC rigid-frame bridge, PSC Beam bridge, Steel box girder bridge) pavement's increasing the total dead load is in 1 ~ 2%. Design moments in a load combination are increased less then 2%. safety factor is decreased less than 3%. Therefore, the structural safety has no problem for applying the electric arc furnace slag within PMC in bridge.

• Resources Recycling
• /
• v.21 no.1
• /
• pp.30-40
• /
• 2012

Electric arc furnace slag is made in ironworks during steel refining, it is been increasing chemical and physical resistibility using ageing method of unstable state of melting steel slag for using concrete's fine aggregates. Which is been changing stable molecular structure of aggregates, it restrains moving of ion and molecule. In Korea, KS F 4571 has been prepared for using the electric arc furnace oxidizing slag to concrete aggregates(EFS). In this study, Electric arc furnace oxidizing slag is used in the PRCC(Polymer Rapid setting Cement Concrete) which is applied a bridge pavement of rehabilitation, largely. The results showed that the increment of compressive strength development by 10- 20%. The flexural strength of EFS-Con increased greatly as the electric arc furnace oxidizing slag changed. The compressive strength and flexural strength developed enough for opening the overlayed EFS-Con to the traffic after 4 hours of EFS-Con placement. The permeability of EFS-Con was evaluated as negligible due to its very low charge passed. Thus, EFS-Con could be used at repairing or overlaying the concrete at fast-track job sites.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.3
• /
• pp.82-88
• /
• 2013

In this project a preliminary experimental research work was done to apply mortars containing magnetite as fine aggregates unto floor finishing materials in order to make indoor environment eco-friendly and to have noiseproof control between floors. Crushed magnetites were substituted as sands in the mix design with a range of 0, 20, 40, 60, 100%. First far-infrared radiation tests to determine emissivity and emission power were done in accordance with the KICM test standard and an outstanding result was obtained. Density and compressive strength test results also showed that as the substitution increases, test values increase in a linear trend. However dry shrinkage test results revealed that as the substitution increases, shrinkage strain also increases. To clearly seek a solution about this problem, more experimental works should be done on oncoming experimental program.

• The Korean Journal of Cytopathology
• /
• v.15 no.1
• /
• pp.60-64
• /
• 2004

The macrofollicular variant of papillary thyroid carcinoma (MVPC) is characterized by macrofollicles occupying more than half of the tumor and demonstrating nuclear features of classic papillary carcinoma. It is difficult to recognize on fine needle aspiration (FNA) cytology due to the paucity of aspirated neoplastic cell clusters, especially when the tumor is associated with extensive areas of hemorrhage. Case: A 34-year-old female presented with a well-demarcated nodule in the thyroid gland, diagnosed as a benign nodule on ultrasonography and computed tomography. FNA cytology smear revealed a few small aggregates of follicular cells with morphological features suspicious for papillary carcinoma, set in a background of hemorrhage, inflammatory cells, and hemosiderin-laden macrophages. Intraoperative frozen section revealed macrofollicular nests filled with hemorrhage and composed of follicular cells demonstrating nuclear clearing and grooves. Conclusion: MVPC is a rare but distinctive variant of papillary carcinoma, which is easily mistaken for adenomatous goiter or benign macrofollicular neoplasm on radiologic findings. The cytopathologist should alert oneself on encountering benign radiologic findings and any smear composed of scant numbers of follicular cells with nuclear features suspicious for papillary carcinoma despite the bland-looking background of hemorrhage and hemosiderin-laden macrophages, and recommend intraoperative frozen sections for a definite diagnosis.

• The Korean Journal of Cytopathology
• /
• v.9 no.1
• /
• pp.105-110
• /
• 1998

Adenomyoepithelioma is an uncommon benign tumor of the breast. We present the fine needle aspiration cytologic features of adenomyoepithelioma in a 23 year-old Korean women, initially diagnosed as fibroadenoma. Aspiration cytologic findings of the left breast mass revealed high cellularity, small to medium sized, less cohesive epithelial clusters, rich naked cells and amorphous materials on background. The epithelial cells were round and uniform with no cytologic atypia or mitosis. Myoeplthelial cells were conspicuous with peripheral rimming along the epithelial clusters. Small amount of fibrotic stromal tissues were observed. Distinguishing features from typical fibroadenoma are less tight epithelial clusters, dyscohesive epithelial cell aggregates, more abundant naked cells and scant stromal tissue fragments.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.365-368
• /
• 2008

In recent, the crushed sand as a fine aggregate has increasingly used for concrete industry due to the shortage of natural sand from river and the growing demand for protection of natural environments. Aggregates may have a significant influence on the properties of self-compacting concrete (SCC) including self-compacting mortar (SCM). The rheological properties of SCC and SCM using crushed sand as a fine aggregate has been compared to that of SCC and SCM using natural sand and mixed sand of both. Test results indicate that the yield stress of SCM containing 50% of mixed sand present higher than those prepared with natural sand and crushed sand according to SP content. the slump values of SCC with natural sand have approximately 5-15% higher than those of SCC with crushed sand. Also the L-box test values ($H_2/H_1$) of SCC with natural sand have approximately 20-30 higher than those of SCC with crushed sand under same water/cement ratio and viscosity enhancing admixture.

• The Korean Journal of Quaternary Research
• /
• v.23 no.2
• /
• pp.13-33
• /
• 2009

Mineralogical analysis with petrographic microscope and XRD was carried out to verify manufacturing technique of the tiles(9 samples) and kiln wall materials(5 samples) from the Anchang-ri history site in Wonju county. One of the results we found is such that during the tile manufacturing process fine tile fragments or wall materials might be added instead of chamottes to maintain tile pattern. Abandoned tiles or wall materials were recycled repeatedly, which may be supported by the recycled chamottes that made from iron-rich fine aggregates or disposed kiln wall materials in many samples analyzed. The tiles and wall materials are divided into 3 types, including low temperature type (below $800^{\circ}C$), intermediate temperature type ($800-930^{\circ}C$) and high temperature type ($930-1470^{\circ}C$) as a function of firing temperature which deduced by mineral assemblages identified under petrographic microscope and by XRD composition. Both Kiln A8 of Choseon Dynasty and wall material AW5 were burned at the highest temperature among the all analyzed samples.

• Applied Chemistry for Engineering
• /
• v.23 no.4
• /
• pp.409-415
• /
• 2012

To recycle the steel slag as manufactured composite materials of polymer concretes, we used the atomizing method to make round aggregates from steel slag, which is treated as industrial wastes. A round rapid-cooled steel slag was used to replace fine aggregate (river sand) or coarse aggregate (crushed aggregate), depending on the grain size. To examine general physical properties of polymer concrete composites manufactured from rapid-cooled steel slag, the polymer concrete specimen with various proportions depending on the addition ratio of polymer binder and replacement ratio of rapid-cooled steel slag were manufactured. In the result of the tests, the mechanical strength of the specimen made by replacing the optimum amount of rapid-cooled steel slag increased notably (maximum compressive strength 117.1 MPa), and the use of polymer binder, which had the most impact on the production cost of polymer concrete composites, could be remarkably reduced. However, the mechanical strength of the specimen was markedly reduced in hot water resistance test of polymer concrete composite.

• Journal of the Korea Concrete Institute
• /
• v.13 no.2
• /
• pp.184-191
• /
• 2001

Recently, as industrialization is rapidly growing and the standard of life is rising, the quantities of waste glasses have been hastily increased and most of them are not recycled but abandoned. It cause some problems such as the waste of natural resources and environmental pollution. Therefore, this study was conducted basic experimental research to analyze the possibilities of recycling of waste glasses(crushed waste glasses outbreaking from our country such as amber, emerald-green, flint and mixed) as fine aggregates for concrete. Test results of fresh concrete, slump and compacting factors decrease because grain shape is angular and air content increase due to involving small size particles so much in waste glasses. Also compressive, tensile and flexural strengths decrease with increase of the content of waste glasses. In conclusion, the content of waste glasses below 30% is reasonable and usage of pertinent admixture is necessary to obtain workability and air content.