• Biotechnology and Bioprocess Engineering:BBE
• /
• v.5 no.6
• /
• pp.456-459
• /
• 2000

A pilot scale experiment was performed for a year to develop a two-phase anaerobic process for piggery wastewater treatment (COD: 6,000mg/L, BOD: 4,000mg/L, SS: 500mg/L, pH 8.4, alkalinity 6,000mg/L). The acidogenic reactor had a total volume of 3㎥, and the methanogenic reactor, an anaerobic up-flow sludge filter, combining a filter and a sludge bed, was also of total volume 3㎥(1.5㎥ of upper packing material). Temperatures of the acidogenic and methanogenic reactors kept at 20$^{\circ}C$ and 35$^{\circ}C$, respectively. When the pH of the acidogenic reactor was controlled at 6.0-7.0 with HCl, the COD removal efficiency increased from 50 to 80% over a period of six months, and as a result, the COD of the final effluent fell in the range of 1,000-1,500 mg/L. BOD removal efficiency over the same period was above 90%, and 300 to 400 mg/L was maintained in the final effluent. The average SS in the final effluent was 270 mg/L. The methane production was 0.32㎥ CH$_4$/kg COD(sub)removed and methane content of the methanogenic reactor was high value at 80-90%. When the pH of the acidogenic reactor was not controlled over the final two months, the pH reached 8.2 and acid conversion decreased compared with that of pH controlled, while COD removal was similar to the pH controlled operation. Without pH control, the methane content in the gas from methanogenic reactor improved to 90%, compared to 80% with pH control.

• Journal of Adhesion and Interface
• /
• v.11 no.3
• /
• pp.89-99
• /
• 2010

In this paper, for polymerization of poly(vinyl acetate-co-ethylene) (VAE) by redox system using poly(vinyl alcohol) (PVOH) as emulsifier on the properties of the final emulsion, and pH changes affect the physical properties of the final emulsion was investigated. The results of the molecular weight of PVOH had a dramatic impact on the emulsion properties. The used a low molecular weight of PVOH products was obtained low viscosity and using the high molecular weight of PVOH were obtained high viscosity product. However, changing the pH of the final polymerized product properties for the PVOH obtained different results. Generally, a poly(vinyl acetate) emulsion by a high degree of polymerization and high molecular weight of PVOH was obtained high viscosity of the final emulsion. But, in VAE was lower emulsion viscosity in high pH. This is the molecular weight of the emulsion during the synthesis of PVOH is considered to be affected by degradation. The final viscosity was decreased by grafting ratio and molecular weight were decreased with increasing of pH.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.2
• /
• pp.498-502
• /
• 2011

The divergent synthesis of novel phosphorus-containing dendrimer with 4,4'-sulphonyldiphenol at the core has been accomplished involving simple condensation reactions using $P(O)Cl_3$, $P(S)Cl_3$, 3-amino-phenol, 3-hydroxy-benzaldehyde, and 2-butyn 1, 4-diol. The final compound was a Schiff's base macromolecule possessing 4 imine bonds, 8 acetylenic bonds and 8 OH groups at the periphery. The structures of intermediate compounds were confirmed by IR, NMR ($^1H$, $^{13}C$ and $^{31}P$), LC-Mass and C, H, N analysis. The structure of the final dendrimer (5) was confirmed by IR, NMR ($^1H$, $^{13}C$ and $^{31}P$), MALDI-TOF-MS, and C, H, N analysis. The surface morphological characteristics of the final dendrimer were understood by Scanning Electronic Microscopic study (SEM). The thermal stability of the final dendrimer was studied by TGA/DTA analysis.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.1
• /
• pp.26-29
• /
• 2000

Major characteristics of brines produced from the salting process were compared among winter, spring, and summer (highland) Chinese cabbages. The soluble-solids contents of final brine were decreased to 87~90% of initial brine during salting process, and showed 16.3, 15.8, and 14.4$^{\circ}$Brix for winter, spring, and highland Chinese cabbages, respectively. The pHs showed similar changes during salting process from pH 8.40~8.63 for initial to pH 6.03~6.24 for final. The high salting(12.4~14%) of final brine needs dilution or reuse treatemnt before discard. The COD of final brine were increased to 39.6 ppm, 52.1 ppm, 37.7 ppm, respectively. During salting total microbial counts of final brine were increased ten times from those of the initial brines for all samples.

• Economic and Environmental Geology
• /
• v.41 no.6
• /
• pp.695-708
• /
• 2008

In order to evaluate the geochemical behaviors of elements with waste rocks in the abandoned Jangpoong Cu mine area, total concentration analysis and leaching experiments were performed. The content of elements within waste rocks compared with background values decreased in order of As>>Cu>Pb>Cd>Co. Leaching experiments were carried out at various extraction environments, considering the acid rain ($0.00001{\sim}0.001N\;HNO_3$) and the acid mine drainage ($0.001{\sim}0.1N$ HNO3). After 24 hours of reaction with different acidic solution, the leaching characteristics of waste rocks were classified into three types according to final pH of leaching solution. Type I refers to the case that the final pH of leaching solution was lower than that of the reaction solution due to the dissolution of acidic minerals from rocks, while type 2 and 3 refer to the case that the final pH maintained higher than that of the reaction solution. Theses types include in acid buffering minerals such as clay minerals and carbonate minerals. The leaching characteristics of the elements after the reaction could be categorized into As-Co-Fe, Cu-Mn-Cd-Zn, and Pb. As-Co-Fe started to get leached under 2.5 of pH regardless of changes in the final pH, and Cu-Mn-Cd-Zn showed different initial leaching pH according to the types of final pH changes. Based on the pH value where leaching started regardless of leaching concentration, the relative mobility of each element was in the order of Mn Zn>Cd>Cu>>Fe Co>As>Pb. Thus, more higher mobility elements(Zn, Mn and Cu) were leached by reacting with acid rain water. Acid mine drainage may result in distributions of elements having relatively less mobility(As, Fe, Co and Pb).

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.4
• /
• pp.2061-2066
• /
• 2016

Purpose: To determine the significance of P57KIP2 immunohistochemistry expression in the histopathological diagnosis of hydatidiform mole. Materials and Methods: Hydatidiform mole patients at King Chulalongkorn Memorial Hospital between January 1999 and December 2011 were recruited. Two gynecologic pathologists reviewed histopathologic slides to confirm diagnosis. Formalin-fixed, paraffin-embedded tissue sections were stained using a bstandard immunostaining system with monoclonal antibodies against P57KIP2 protein. Correlations among pathological features, immunohistochemical expression and clinical data were analyzed. Results: One hundred and twenty-seven hydatidiform mole patients were enrolled. After consensus review, 97 cases were diagnosed as complet (CHM) and 30 cases as partial (PHM). Discordance between the first and final H&E diagnoses was found in 19 cases (14.9%, k= 0.578). Significant pathological features to classify the type of hydatidiform mole are central cisterns, trophoblastic proliferation, trophoblastic atypia, two populations of villi, fetal vessels and scalloped borders. After performing immunohistochemistry for P57KIP2, 107 cases were P57KIP2 negative and 20 cases positive. Discordant diagnoses between final H&E diagnosis and P57KIP2 immunohistochemistry was identified in 12 cases (9.4%). Sensitivity of final H&E diagnosis for CHM was 89.7%; specificity was 95.0%. PHM sensitivity and specificity of final H&E diagnosis was 95.0% and 89.7%, respectively. Conclusions: Histopathological diagnosis alone has certain limitations in accurately defining types of hydatidiform mole; P57KIP2 immunohistochemistry is practical and can be a useful adjunct to histopathology to distinguish CHM from non-CHM.

• KSBB Journal
• /
• v.11 no.3
• /
• pp.303-310
• /
• 1996

The marine microalga Isochrysis galbana Parke was studied to optimize its growth conditions in flask culture. Important medium components studied include nitrogen source, buffer, trace elements and vitamins. Environmental conditions include pH, temperature, light intensity, mixing extent and working volume. The medium prepared from natural sea-waters gave a higher final cell density than the medium prepared from synthetic sea-water Nitrate was a better source than ammonium. In the range of 0.4∼2mM, the final cell density was proportional to the initial nitrate concentration and the cell yield was estimated to be 8.5g dry cell wt/g N. For phosphate, optimal growth was observed in 0.1∼1.0mM but a considerable variation in pH was resulted. The addition of Tris at 5mM or 7mM could stabilize the medium pH, but this significantly reduced both growth rate and final cell density, The effect of trace elements and vitamins was negligible. Optimal temperature and initial pH were $20^{\circ}C$ and 8. When the intensity of incident light was varied in the range of 400∼2100 lux, the growth rate increased from 10mL to 70mL, the final cell density decreased although the initial growth rate did not change. Optimal agitation speed was 100rpm when working volume was 30mL. With optimal conditions, the maximum specific growth rate obtained was 0.021hr-1 and the final cell density was 1.1g/L.

• Membrane and Water Treatment
• /
• v.10 no.2
• /
• pp.155-163
• /
• 2019

The roles of polypropylene (PP) beads and pH on membrane fouling and treatment efficiency were investigated in a hybrid advanced water treatment process of tubular carbon fiber membranes (ultrafiltration (UF) or microfiltration (MF)) and PP beads. The synthetic feed including humic acid and kaolin flowed inside the membrane, and the permeated contacted the PP beads fluidized in the space between the membrane and the module with UV irradiation and periodic water back-flushing. In the hybrid process of UF ($0.05{\mu}m$) and PP beads, final resistance of membrane fouling ($R_f$) after 180 min increased as PP beads increased. The turbidity treatment efficiency was the maximum at 30 g/L; however, that of dissolved organic matters (DOM) showed the highest at PP beads 50 g/L. The $R_f$ strengthened as pH of feed increased. It means that the membrane fouling could be inhibited at low alkali condition. The treatment efficiency of turbidity was almost constant independent of pH; however, that of DOM showed the maximum at pH 5. For MF ($0.1{\mu}m$), the final $R_f$ was the minimum at PP beads 40 g/L. The treatment efficiencies of turbidity and DOM were the maximum at PP beads 10 g/L.

• Journal of the Korean Applied Science and Technology
• /
• v.12 no.2
• /
• pp.85-92
• /
• 1995

The rate constant of the nucleophilic addition of 1-propanethiol to ${\alpha}-phenyl-N-iso-propylnitrone$ derivatives were determined at various pH and a rate equation which can be applied over wide pH range is obtained. Final product of the addition reaction was ${\alpha}-thiopropyl-p-phenylbenzylideneamine$. Base on the rate equation, general base effect, substituent effect and final product, plausible mechanism of addition reaction have been proposed. Below pH 3.0, the reaction was initiated by the addition of 1-propanthiol, and in the range of pH 3.0-10.0, proceeded by the competitive addition of 1-propanethiol and propanethiolate. Above the pH 10.0, the reaction proceeded through the addition of propanethiolate.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.641-646
• /
• 2003

In this study, a series of electrokinetic(EK) remediation experiments are carried out under the different degree of saturation for contaminated soil with lead. for constant electrical potential, the final current of all the sample represents the similarity to steady-state value of 5∼7mA. Under conditions of all the degree of saturation the anode reservoir becomes acidic(pH as low as 3) while the cathode reservoir is basic(pH as high as 12). But pH changes in the sample is a little and decontamination efficiency is the low.