• 한국환경과학회지
• /
• 제23권4호
• /
• pp.737-742
• /
• 2014

This study aimed for evaluating the applicability of the two stage dual media filtration system in field water treatment plant. The field plant of two stage and dual media filtration system was operated for 2 months. Average iron concentrations of the settled water, existing filtered water and second stage filtered water was 0.041 mg/L, 0.007 mg/L and 0.005 mg/L, respectively. Removal efficiency of iron concentration in the second stage is appropriately 35% more than in existing filtered water. Also removal efficiency of residual chlorine in the dual media filtration system is relatively 42.3% more than in existing filtered water due to adsorption of activated carbon, but the removal of ammonia nitrogen by adsorption is insufficient. Average concentrations of THM and chloroform in the settled water are 0.033 mg/L, 0.026 mg/L, respectively and in existing filtered water are 0.023 mg/L and 0.023 mg/L. Average concentrations of THM and chloroform in the dual media filtration system are 0.008 mg/L and 0.013 mg/L. Therefore removal efficiency of THM concentration in second stage is more than 66.4% in existing filtrated water. Also removal efficiency of chloroform in the dual media filtration system is more than 50.0% in existing filtered water because of the adsorption of activated carbon. In this case backwashing period in dual stage system is 4~5 days, but in existing filtration system is 1~2 days.

• 한국입자에어로졸학회지
• /
• 제10권2호
• /
• pp.45-51
• /
• 2014

Fine particle capture is facing a challenge since traditional filtration which relies on the combination of impaction, interception, diffusion has a limited efficiency for fine particle capture particularly in size from 0.1 to $0.5{\mu}m$. This paper reviewed the collection efficiency of above mechanisms, as well as magnetic mechanisms for ferromagnetic particles, and mainly studied the influencing factors of magnetic filtration. Filtration velocity, magnetic field intensity and fiber size were found to be the most important parameters for magnetic filtration.

• 한국물환경학회지
• /
• 제20권6호
• /
• pp.652-656
• /
• 2004

Both surface wash and backwash are considered as one of the most important methods that can improve the filtration efficiency in the existing water treatment plant. This study has mainly focused on the improvement of filtering efficiency by controlling surface wash and backwash time, and water level before backwash (when drained up to the trough, when drained up to 10 cm above filter bed, and when drained below 10 cm filter bed). Filtration efficiency was shown a little bit of differences depending on the operating conditions like surface wash injection pressure, the distance control between filter bed and the facility, and the types of surface wash. When the water level before backwash was reached up to 10 cm below filter bed after draining, however, the filtration velocity and the turbidity removal efficiency in the filter bed was improved. When the surface wash followed by backwash is longer, it showed a similar result. Because the proper adjustment of surface washing time makes filtration efficiency higher, therefore, it is necessary to set up the backwash time moderately.

• 한국환경보건학회지
• /
• 제47권3호
• /
• pp.292-301
• /
• 2021

Objectives: Wearing medical masks has been recommended since the declaration of coronavirus disease-19 (COVID-19) as a pandemic disease. Certified medical masks are evaluated according to filtration efficiency and facial inhalation resistance. However, some people use non-certified common masks. This study aimed to evaluate various non-certified commercial masks based on the certification criteria for medical masks. Methods: Twenty mask products (three anti-droplet, three disposable dental, eight fashion, three cotton, and three children's masks) were selected. For performance evaluation, filtration efficiency and facial inhalation resistance tests were conducted. The evaluation method followed the certification method for KF-certified masks of the Ministry of Food and Drug Safety (MFDS) and the N95 respirator of the National Institute for Occupational Safety and Health (NIOSH). Results: None of the 20 masks met the KF94 certification standard set by the MFDS. Four and three masks respectively met the KF80 certification standard and the N95 standard of NIOSH. Filtration efficiency was significantly higher in three-layer masks than in single layer masks. Pleated-type masks had higher filtration efficiency than cone-type masks. There was no correlation between the structure of masks and facial inhalation resistance. Conclusion: While no masks complied with the KF94 certification standard, a few masks met the KF80 and the N95 certification standards of NIOSH. Although some people wear non-certified commercial masks, protection from aerosols is not guaranteed by such masks. Evaluation of the protection efficiency of non-certified mask against microbiological infection is needed for the prevention of infectious disease.

• 한국염색가공학회지
• /
• 제25권3호
• /
• pp.232-239
• /
• 2013

In this study, 25gsm melt-blown polypropylene nonwoven for dust-proof/medical masks was finished by the corona discharging treatment. The influence of corona discharging parameters on the filtration efficiency was investigated. Several parameters such as discharging voltage, discharging speed, distance to discharging wire and configuration of discharging system had an effect on filtration efficiency, while the parameters had no effect on breathing resistance. Optimum corona discharging conditions are as follows: Wires were installed on the upper part of the nonwoven and paper pipe was installed on the lower part of the nonwoven having a distance of 5cm. The sequence of wire voltages was +60 kV, +60 kV, 0, -60 kV, and -60 kV. The discharging voltage and speed were 60 kV and 30m/min respectively. The nonwoven treated by corona discharging at the optimum condition showed a filtration efficiency of 80% or more, which is suitable for dust-proof/medical masks.

• 한국습지학회지
• /
• 제8권2호
• /
• pp.45-51
• /
• 2006

우리나라 대부분의 하수처리장에서는 영양염류 및 MBAS의 제거를 위하여 생물학적 고도처리시설과 모래여과시설을 설치하여 운영하고 있다. 그러나 미처리된 영양염류 및 합성세제가 수계에 그대로 유입되어 하천에 사상성부착조류의 발생 및 하천의 자정작용을 방해하여 물에서의 이 취미 발생과 거품 때문에 미관상 불쾌하여 하수처리수를 도시하천유지용수로 재이용하는 G 하수처리장을 실험 대상으로 하여 모래여과시설에 대한 MBAS 제거효율을 파악하고자 본 연구를 실시하였다. 그 결과 모래여과를 이용한 MBAS의 최대 제거 효율은 24시간이 지난 후에 63% 정도로 나타났고 특히, 2시간 내지 4시간이 경과한 후의 MBAS 제거 효율도 30% 정도로 그 효과는 아주 적은 것으로 나타났다. 결론적으로 모래여과를 이용한 MBAS 제거는 여과지속시간이 장시간 소요되어 시설부지의 대규모화 등 경제성이 부족하고 제거 효율도 거의 기대에 미치지 못하여 앞으로 하수처리수를 하천유지용수로 재이용하는 하천에서는 MBAS 제거를 위해서는 모래여과시설보다는 다른 공법의 연구와 대책이 필요할 것으로 판단되었다.

• 한국산업보건학회지
• /
• 제34권1호
• /
• pp.48-56
• /
• 2024

Objectives: The coronavirus pandemic that began in 2019(COVID-19) has been one of the worst pandemics of the 21st century. Masks have been used to prevent COVID-19, but there are currently no standards for the long-term use of masks in the Republic of Korea. This study was conducted to assess the microbiological safety of KF94(Korea Filter 94) disposable face masks according to wearing duration by evaluating the bacterial filtration efficiencies of masks worn by research participants. Methods: A commercially available KF94 mask certified by the Ministry of Food and Drug Safety(MFDS) in the Republic of Korea was selected as the test mask. The research participants(n = 15) wore masks for the durations of one, three, and seven days. Participants also reported several parameters, including wearing time, makeup frequency, and storage. Bacterial filtration efficiencies of the worn masks were measured by a mask bioaerosol filtration tester. Staphylococcus aureus(S. aureus) was used as the test bacteria and quantitatively measured through the cultivation method. Then, bacterial filtration efficiency was calculated using the formula suggested by the MFDS. Results: All worn masks showed over 99.98% of mean bacterial filtration efficiency for S. aureus. There were no significant differences among bacterial filtration efficiencies of face masks according to wearing duration. There was also no significant difference among bacterial filtration efficiencies among participants. There was no correlation between the results of bacterial filtration efficiencies and reported parameters from participants. Conclusions: In the absence of significant external damage to the mask, the bacterial filtration efficiency of the mask can be maintained even after seven days of wearing. This result suggests that KF94 masks certified by the MFDS can be used repeatedly for about a week without loss of bacterial filtration efficiency.

• 상하수도학회지
• /
• 제31권6호
• /
• pp.529-537
• /
• 2017

Membrane filtration process is an advanced water treatment technology that has excellently removes turbidity and microorganisms. However, it is known that it has problems such as low economic efficiency and the operating stability. Therefore, this study was to evaluate on the economical feasibility and operational stability comparison of membrane and sand filtration process in Im-sil drinking water treatment plant. For the economic analysis of each process, the electricity cost and chemical consumption were compared. In the case of electric power consumption, electricity cost is $68.67KRW/m^3$ for sand filtration and $79.98KRW/m^3$ for membrane filtration, respectively. Therefore, membrane filtration process was about 16% higher than sand filtration process of electricity cost. While, the coagulant usage in the membrane filtration process was 43% lower than the sand filtration process. Thus, comparing the operation costs of the two processes, there is no significant difference in the operating cost of the membrane filtration process and the sand filtration process as $85.94KRW/m^3$ and $79.71KRW/m^3$ respectively (the sum of electricity and chemical cost). As a result of operating the membrane filtration process for 3 years including the winter season and the high turbidity period, the filtrated water turbidity was stable to less than 0.025 NTU irrespective of changes in the turbidity of raw water. And the CIP(Clean In Place) cycle turned out to be more than 1 year. Based on the results of this study, the membrane filtration process showed high performance of water quality, and it was also determined to have the economics and operation stability.

• 상하수도학회지
• /
• 제22권3호
• /
• pp.289-298
• /
• 2008

Because of their simplicity, efficiency, and economy, slow sand filters are appropriate means of water treatment for small water systems. Biological activity within the sand bed have the strongest influence on removal efficiency of pollutants by slow sand filtration. This report investigated the microorganisms(algae) of slow sand filtration pilot plant at Y water treatment plant. Data were collected at inflow and slow sand filtration from May to October, 2007. The results indicated that the light exposure was influenced on microorganism in slow sand filtration according to the formation of algal biofilm. The relative contribution of biomass and accumulated particulates to head loss development in slow sand filters requires further study.

• 한국대기환경학회지
• /
• 제32권4호
• /
• pp.384-393
• /
• 2016

In this study, two kinds of industrial filter bags were tested for their filtration performance to apply the existing bag filter systems. Experimental variables were examined for pressure drop, cleaning interval, residual pressure drop, cleaning efficiency, fractional grade efficiency, total collection efficiency according to the filter bag structure. According to these results, the filter bags tested in this study demonstrated good performance in dust collection. This was also true for the double surface filter bag. The lifetime was longer than the round type filter bag because the filtration area was more than 1.6 times wider and the filter quality factor was much higher. Therefore, double surface filter bags are suggested to be used in order to increase filtration performance of the bag filter systems.