• 융합보안논문지
• /
• 제12권1호
• /
• pp.63-70
• /
• 2012

오늘날 스마트폰 시장이 폭발적으로 성장함에 따라 일반인과 시각 장애인의 스마트폰 사용에 차이가 발생하여 정보 활용 격차가 날로 심화되고 있다. 본 논문에서는 시각 장애인의 일반인과의 정보 활용 격차를 줄이기 위해 시각 장애인만을 대상으로 한 저렴한 가격의 요철 필름을 사용한 점자를 기반으로 문자 및 숫자 입력 시스템을 제안한다. 제안된 시스템은 점자의 모양을 기반으로 애플의 iOS 상에 요철 필름과 레이아웃을 설계하여 그 레이아웃에 따라 점자 및 숫자 키보드를 설계하였고, 부가적으로 전화, 문자, 단축 다이얼, 응급 구조를 위한 위치전송 기능을 설계하였다. 점자 키보드를 이용하여 입력한 문자는 자동으로 클립보드로 복사되며 다른 응용에서도 이용할 수 있게 하여 시각 장애인이 스마트폰을 편리하게 사용할 수 있도록 구현 하였다.

• 대한기계학회논문집B
• /
• 제23권8호
• /
• pp.945-956
• /
• 1999

This work reports a set of approximate analytical solutions describing the initial transient process of close-contact melting between a rectangular parallelepiped solid and a flat plate on which either constant temperature or constant heat flux is imposed. Not only relative motion of the solid block tangential to the heating plate, but also the density difference between the solid and liquid phase is incorporated in the model. The thin film approximation reduces the force balance between the solid weight and liquid pressure, and the energy balance at the melting front into a simultaneous ordinary differential equation system. The normalized model equations admit compactly expressed analytical solutions which include the already approved two-dimensional solutions as a subset. In particular, the normalized liquid film thickness is independent of all pertinent parameters, thereby facilitating to define the transition period of close-contact melting. A unique behavior of the solid descending velocity due to the density difference is also resolved by the present solution. A new geometric function which alone represents the three-dimensional effect is introduced, and its properties are clarified. One of the representative results is that heat transfer is at least enhanced at the expense of the increase in friction as the cross-sectional shape deviates from the square under the same contact area.

• 전기학회논문지P
• /
• 제66권4호
• /
• pp.236-241
• /
• 2017

This paper presents a single-phase grid connected voltage-ed inverter with a power decoupling circuit. In the single-phase grid connected voltage-ed inverter, it is well known that a power pulsation with twice the grid frequency is contained in the input power. In a conventional voltage type inverter, electrolytic capacitors with large capacitance have been used in order to smooth the DC voltage. However, lifetime of those capacitors is shortened by the power pulsation with twice grid frequency. The authors have been studied a active power decoupling(APD) method that reduce the pulsating power on the input DC bus line, this enables to transfer the ripple energy appeared on the input DC capacitors into the energy in a small film capacitor on the additional circuit. Hence, extension of the lifetime of the inverter can be expected because the small film capacitor substitutes for the large electrolytic capacitors. Finally, simulation and experimental results are discussed.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.114-114
• /
• 2010

In this study, structural properties and photoluminescent characteristics of thin film rhombohedral zinc orthosilicate doped with manganese ($Zn_2SiO_4:Mn$) were investigated. The $Zn_2SiO_4:Mn$ films showed a pronounced absorption edge in the near ultraviolet wavelength region and a high optical transparency in the visible spectral range. The maximum transmittance reached 0.922 at 597 nm, which was very close to the transmittance of the fused quartz substrate alone (0.935). The $Zn_2SiO_4:Mn$ films were composed of rhombohedral polycrystalline grains with random crystallographic orientation. The broad-band photoluminescence emission peaked at around 525 nm was observed from the $Zn_2SiO_4:Mn$ films, which was ascribed to the radiative relaxation from the $^4T_1$ lowest excitation state to $^6A_1$ ground state of 3d5 electrons in divalent manganese ion. The excitation band exhibited a peak maximum at 259 nm in the near ultraviolet region, which was considered to be associated with the charge transfer transition of divalent Mn ion in the $Zn_2SiO_4$ system.

• KSBB Journal
• /
• 제13권6호
• /
• pp.724-729
• /
• 1998

To develop a large scale countercurrent single pass heat exchanger for continuous transportation and sterilization of soybean paste, microflora and color value of sterilized soybean paste were examined at various sterile condition. Aerobes, anaerobes, molds, yeasts and lactic acid bacteria were 5.1 x 107 CFU/g, 7.1 x 107 CFU/g, 2.6 x 105 CFU/g, 4.3 x 106 CFU/g, 1.3 x 107 CFU/g, respectively in raw soybean paste. In gold band ampoule test, aerobes and anaerobes of soybean paste were viable up to 90$^{\circ}C$, but become unviable at 100$^{\circ}C$. Molds decreased rapidly and yeasts decreased slowly from 70$^{\circ}C$. Lactic acid bacteria were unviable at 60$^{\circ}C$ within 10 min. In color test, Hunter L, a, and b values of soybean paste were 50.2, +5.6, and +17.8, respectively. After heating in polyethylene film bag at 80$^{\circ}C$, Hunter values were not so much changed and become 50.2, +4.7, and +19.7, respectively. The micorflora and color of soybean paste sterilized in a large scale heat exchanger system resulted in very similar to those of gold band ampoule and polyethylene film bag by effective heat transfer.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.155-158
• /
• 2007

Printed organic thin-film transistor(OTFT) to use as a switching device for an organic light emitting diode(OLED) were fabricated in the microcontact printing and direct printing processes at room temperature. The gate electrodes($5{\mu}m$, $10{\mu}m$, and $20{\mu}m$) of OTFT was fabricated using microcontact printing process, and source/drain electrodes ($W/L=500{\mu}m/5{\mu}m$, $500{\mu}m/10{\mu}m$, and $500{\mu}m/20{\mu}m$) was fabricated using direct printing process with hard poly(dimethylsiloxane)(h-PDMS) stamp. Printed OTFT with dielectric layer was formed using special coating system and organic semiconductor layer was ink-jet printing process. Microcontact printing and direct printing processes using h-PDMS stamp made it possible to fabricate printed OTFT with channel lengths down to $5{\mu}m$, and reduced the process by 20 steps compared with photolithography. As results of measuring he transfer characteristics and output characteristics of OTFT fabricated with the printing process, the field effect characteristic was verified.

• Nuclear Engineering and Technology
• /
• 제54권3호
• /
• pp.1085-1097
• /
• 2022

A printed circuit steam generator (PCSG) is being considered as the component for pressurized water reactor (PWR) type small modular reactor (SMR) that can further reduce the physical size of the system. Since a steam generator in many PWR-type SMR generates superheated steam, it is expected that dryout front oscillation can potentially cause thermal fatigue failure due to cyclic thermal stresses induced by the transition in boiling regimes between convective evaporation and film boiling. To investigate the fatigue issue of a PCSG, a reference PCSG is designed in this study first using an in-house PCSG design tool. For the stress analysis, a finite element method analysis model is developed to obtain the temperature and stress fields of the designed PCSG. Fatigue estimation is performed based on ASME Boiler and pressure vessel code to identify the major parameters influencing the fatigue life time originating from the dryout front oscillation. As a result of this study, the limit on the temperature difference between the hot side and cold side fluids is obtained. Moreover, it is found that the heat transfer coefficient of convective evaporation and film boiling regimes play an essential role in the fatigue life cycle as well as the temperature difference.

• 정보저장시스템학회논문집
• /
• 제1권1호
• /
• pp.93-98
• /
• 2005

Rewritable optical disk is one of the essential data storage media in these days, which takes advantage of the different optical properties in the amorphous and crystalline states of phase change materials. As well known, data transfer rate is one of the most important parameter of the phase change optical disks, which is mostly limited by the crystallization speed of recording media. Therefore, we doped Sn/Bi to $Ge_2Sb_2Te_5$ alloy in order to improve the crystallization speed and investigated the dependence of phase change characteristics on Sn/Bi doping concentration. The Sn/Bi doped $Ge_2Sb_2Te_5$ thin film was deposited by RF magnetron co-sputtering system and phase change characteristics were investigated by X-ray diffraction (XRD), static tester, UV-visible spectrophotometer, electron probe microanalysis (EPMA), inductively coupled plasma mass spectrometer (ICP-MS) and atomic force microscopy (AFM). Optimum doping concentration of Bi and Sn were 5${\~}$6 at.$\%$ and the minimum time for crystallization was below than 20 ns. This improvement is correlated with the simple crystalline structure of Sn/Bi doped $Ge_2Sb_2Te_5$ and the reduced activation barrier arising from Sn/Bi doping. The results indicate that Sn/Bi might play an important role in the transformation kinetics of phase change materials..

• 한국정밀공학회지
• /
• 제11권1호
• /
• pp.54-62
• /
• 1994

This paper presents active control methodologies to suppress structural deflections of a composite beam using a distributed piezoelectric-film actuator and sensor. Three types of different controllers are employed to achieve vibration suppression. The controllers are established depending upon the information on the velocity components of the structrue and on the deflection magnitudes as well. They are constant-amplitude controller(CAC), constant-gain mcontroller(CGC), and constant-amplitude-gain controller(CAGC). For the minimization of the residual vibration (chattering in a settled phase), which is the practical shortcoming of the conventional CAC dur to time delay phenomenon of the hardware system, a new control algoritym CAGCis designed by selecting switching constants in an optimal manner with respect to the initial tip deflection and the applied voltage. The experimental investigations of the transient and forced vibration control for the first vibrational mode are undertaken in order to compare the suppression efficiency of each control algorithm. Moreover, simultaneous controllability of various vibrational modes through the proposed scheme is also experimentally verified by pressenting both the transfer function and the phase.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2005년도 춘계 학술대회
• /
• pp.137-144
• /
• 2005

원전 1차 계통내에 실리카는 알카리 토금속(Ca, Mg, Al 등)과 결합하여 원전 연료 피복재에 열전달을 방해하는 규석층(Zeolite)를 형성한다. 이렇게 형성된 규석층은 원전 피복재 손상의 원인이 된다. 이러한 원전 1차 계통내 실리카의 문제점들은 EPRI 보고서 등에 그 문제점이 꾸준히 제기되어 왔으며 이러한 문제점들을 해결하기 위하여 막분리 공정을 이용하고자 하였다. 먼저 실험실 규모의 실험을 통해 NF막의 실리카 제거율이 약 $60\;{\sim}\;70\%$, Boron 제거율이 약 $10\;{\sim}\;20\%$로 그 적용 가능성을 확인하였으며, FilmTec과 Osmonics 사 NF막 제품 4종에 대하여 현장 실험을 수행하였다. 현장 사용후연료 저장 붕산수 400L를 시료로 한 실험에서 운전압력 $10kg_{f}/cm^2$에서 FilmTec 사의 NF90-2540이 실리카 제거율이 약 $98\%$, Boron 제거율이 약 $43\%$로 확인되었으며 또한 NF270-2540이 실리카 제거율이 약 $38\%$, Boron 제거율이 약 $3.5\%$로 확인되었다. 이를 바탕으로 장기운전 특성 실험 등의 추가적인 연구를 통해 최적의 실리카 제거를 위한 막 분리공정을 설계 할 예정이다.