• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.2
• /
• pp.37-43
• /
• 1999

Modules of the system that requires large capacity and high-speed information processing are implemented in the form of MCM that allows high-speed data processing, high density circuit integration and widely applied to such fields as ATM, GPS and PCS. Hence we developed the ATM switching module that is consisted of three chips and 2.48 Gbps data throughput, in the form of 10 multi-layer by Cu/Photo-BCB and 491pin PBGA which size is $48 \times 48 \textrm {mm}^2$. hnologies required for the development of the MCM includes extracting parameters for designing the substrate/package through the interconnect characterization to implement the high-speed characteristics, thermal management at the high-density MCM, and the generation of the testability that is one of the most difficult issues for developing the MCM. For the development of the ATM Switching MCM, we extracted signaling delay, via characteristics and crosstalk parameters through the interconnect characterization on the MCM-D. For the thermal management of 15.6 Watt under the high-density structure, we carried out the thermal analysis. formed 1.108 thermal vias through the substrate, and performed heat-proofing processing for the entire package so that it can keep the temperature less than $85^{\circ}C$. Lastly, in order to ensure the testability, we verified the substrate through fine pitch probing and applied the Boundary Scan Test (BST) for verifying the complex packaging/assembling processes, through which we developed an efficient and cost-effective product.

• Journal of Sensor Science and Technology
• /
• v.24 no.6
• /
• pp.404-411
• /
• 2015

A stoichiometric mixture of evaporating materials for $BaAl_2Se_4$ single crystal thin films was prepared from horizontal electric furnace. To obtain the single crystal thin films, $BaAl_2Se_4$ mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the Hot Wall Epitaxy (HWE) system. The source and substrate temperatures were $610^{\circ}C$ and $410^{\circ}C$, respectively. The crystalline structure of the single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction (DCXD). The carrier density and mobility of $BaAl_2Se_4$ single crystal thin films measured from Hall effect by van der Pauw method are $8.29{\times}10^{-16}cm^{-3}$ and $278cm^2/vs$ at 293 K, respectively. The temperature dependence of the energy band gap of the $BaAl_2Se_4$ obtained from the absorption spectra was well described by the Varshni's relation, $E_g(T)=3.4205eV-(4.3112{\times}10^{-4}eV/K)T^2/(T+232 K)$. The crystal field and the spin-orbit splitting energies for the valence band of the $BaAl_2Se_4$ have been estimated to be 249.4 meV and 263.4 meV, respectively, by means of the photocurrent spectra and the Hopfield quasicubic model. These results indicate that the splitting of the ${\Delta}so$ definitely exists in the ${\Gamma}_5$ states of the valence band of the $BaAl_2Se_4/GaAs$ epilayer. The three photocurrent peaks observed at 10 K are ascribed to the $A_1$-, $B_1$-exciton for n =1 and $C_{31}$-exciton peaks for n=31.

• Cartoon and Animation Studies
• /
• s.25
• /
• pp.177-201
• /
• 2011

This article intends to draw the Road map of Korean International Animation Festival through the research of background and its identity of 4 International Animation Film Festivals Such as Annecy, Zagreb, Ottawa and Hiroshima. I was given opportunity to visit Annecy since 2009, it brought me to the real attraction of animation for watching of pleasure and passion of the people those who love animations. For the combining more advanced system and structure for Animation Festival in Korea, I had to do research all the information from the documents from the Annecy Collections. though I have not get the chance to go others except Annecy, However, I could get their background and history whenever I met the other Festival Committee Members. These Festivals showed us successful Road Map for the Animation Festivals in Korea as a role model. For the getting advanced system of Animation Festivals in Korea. It requires the animation theater for animation, effort for the Audiences's Convenience and international network composition system. However, the last task of us is to make people to entertain and enjoy the animation Films, its world of attraction.

• Korean Journal of Food Science and Technology
• /
• v.32 no.2
• /
• pp.317-322
• /
• 2000

This study examined the effect of nitrogen$(N_2)$ gas packing and ${\gamma}-oryzanol$ treatment on the shelf life of Yukwa(Korean traditional snack). Yukwa were stored with $N_2$ gas packing(AN), $N_2$ gas packing with ${\gamma}-oryzanol$ treatment(ANA), and PE film packing with air(PE) for 20 days at $60^{\circ}C$. They were evaluated by POV, AV, conjugated diene, hexanal, color and sensory characteristics. The POV, AV and conjugated diene content increased abruptly in PE and AN, but increased slowly in ANA with prolonged storage. Higher sensory scores for Yukwa were found in ANA as compared to those in PE and AN. Hexanal content, yellowness and redness in AN were higher than those in ANA and PE. The moisture content, which is supposed to be related with browning of Yukwa, was 3 times higher in AN than that in PE. Oxygen content of each Yukwa pack, even in $N_2$ gas packing, increased remarkably as storage period increased because their highly porous, fragile and syrup-coated structure resulted in incomplete degassing before $N_2$ gas was flushed into package. Consequently, $N_2$ gas packing was inefficient, but $N_2$ gas packing combined with antioxidant(such as ${\gamma}-oryzanol$) treatment was effective for the extension of shelf life of Yukwa.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12B
• /
• pp.1452-1458
• /
• 2009

In this paper, Our proposed Multipurpose Complex Card UHF band RFID small-size Tag antenna. Multi purpose Complex Card UHF band RFID small-size Tag antenna that is to minimize the low efficiency of RFID Tag Read Range that generates space limitation and a conductor surrounded by inducing fingerpring system with dual(HF, UHF) Card is presented. Our proposed UHF band RFID small-size Tag antenna is for the Multipurpose Complex Card that is mounted on the fingerpring system as well as the HF Tag. It also enables to minimize and facilitates Tag chip matching by adjusting Tapered, Meander line and Loop structure. Given the card substance properties and periphery circuit, the proposed small-size Tag antenna, in this report, is designed with PET film with size of $50{\times}15mm^2$. The RFID small-size Tag method for measurements is used by EPCglobal Static Test instrument in Anechoic Chamber, which is tested with dual Card, within the car and in wallet. It is found that Read Range is 3.8m from the EPCglobal Static Test, Maximum Read Range within the car from the field test results in 7.6m. Proposed Tag antenna is will be used in the parking control security system.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.4 no.4
• /
• pp.18-25
• /
• 2000

A two-color particle image velocimetry (PIV) has been developed for measuring two dimensional velocity flowfields and applied to a Mach 2.0 supersonic nozzle. This technique is similar to a single-color PIV technique except that two different color laser beams are used to solve the directional ambiguity problem. A green-color laser sheet (532 nm: 2nd harmonic beam of YAG laser) and a red-color laser sheet (619 nm: output beam from YAG pumped Dye laser using Rhodamine 640) are employed to illuminate the seeded particles. A high resolution (3060${\times}$2036) digital color CCD camera is used to record the particle positions. This system eliminates the photographic-film processing time and subsequent digitization time as well as the complexities associated with conventional image shifting techniques for solving directional ambiguity problem. The two-color PIV also has the advantage that velocity distributions in high speed flowfields can be measured simply and accurately by varying the time interval between two different laser beams due to its high signal-to-noise ratio and thereby less requirement of panicle pair numbers for a velocity vector in one interrogation spot. The velocity distribution in the Mach 2.0 supersonic nozzle has been measured and the over-expanded shock cell structure can be predicted by the strain rate field. These results are compared and analyzed with the schlieren photograph for the velocity distributions and shock location.

• Review of Culture and Economy
• /
• v.20 no.3
• /
• pp.3-33
• /
• 2017

The present study analyzed movie consumption behavior from the perspective of transaction cost, taking into account the possible incurrence of additional costs in the process of consumers obtaining movie information to choose movies. Regression and multinomial logistic regression analyses were performed in the analysis by taking movie information and the individuals' social demographic characteristics as independent variables and the number and frequency of movies watched as dependent variables, using information from the "2015 movie consumer survey." The results showed that consumers considering elements such as "directors" and "online reviews" were found to be more active in movie consumption. The analysis of movie-watching frequency showed that the information considered when choosing a movie was different for high- and low-frequency movie viewers. Putting these factors together suggests that movie consumption can vary according to an individual's cultural capital, preferences, and their degree of movie information awareness. While existing studies have mostly analyzed the determinants of box office performance, the significance of the present study is its empirical analysis of individual movie information in terms of transaction cost. Based on the results above, it can be inferred that the cyclical structure of trading expenses influences movie consumption and, once preferences are formed through a certain level of consumption, the trading cost expenses decrease, which results in increasing consumption. Therefore, film makers need to establish and execute marketing strategies that appropriately use movie information so that consumers can reduce the trading costs necessary for movie watching.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.604-609
• /
• 2019

In this study, we fabricated a capacitive humidity sensor with interdigitated (IDT) electrodes using a thermosetting polyimide as a humidifying material. First, the number of electrodes, thickness, and spacing of the polyimide film were optimized, and a mask was designed and fabricated. The sensor was fabricated on a silicon substrate using semiconductor processing equipment. The area of the sensor was $1.56{\times}1.66mm^2$, and the width of the electrode and the gap between the electrodes were each $3{\mu}m$. The number of electrodes was 166, and the length of an electrode was 1.294 mm for the sensitivity of the sensor. The sensor was then packaged on a PCB for measurement. The sensor was inserted into a chamber environment with a temperature of $25^{\circ}C$ and connected to an LCR meter to measure the change in capacitance at relative humidity (RH) of 20% to 90%, 1 V, and 20 kHz. The results showed a sensitivity of 26fF/%RH, linearity of < ${\pm}2%RH$, and hysteresis of < ${\pm}2.5%RH$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.168-175
• /
• 2019

The purpose of this paper is to examine the characteristics of organic relations according to the characteristics of space and place in which human activities are spreading. The diffusion of various human experiences and the interaction of space and place that form a mutual construction network create momentum for expanding individual or collective experiences. The space and place that lead to the interactions of human activities are expressed in various ways. Through the domestic travel program especially, the ways of expressing space and place are spreading as various "fields of experience." The composition and the expression system of a travel program is transformed into a subject of thought, not a mere experience of space and place through the formation of a "field of experience" that can be thought out and thought of as an existing travel style. Therefore, in this study, we examine the characteristics of the MBC Plus channel from a socio-cultural perspective, expressed through the experience of space and place characteristics expressed through a travel program. The result of an analysis of story development composition for this study shows that the experience of space and place minimizes the boundaries of various cultural discounts according to their relationships to food and communication. In addition, the analysis results of a three-way communication structure show that the emotional code of the audience is maximized through the process of maximizing the effect of reality, and minimizing the gap between the cultural differences and the boundaries through the empathic situation and the empathic subject.

• Journal of Adhesion and Interface
• /
• v.20 no.1
• /
• pp.1-8
• /
• 2019

Fabrication of monolayer is important method for enhancing physical and chemical characteristics such as light shielding and antireflection while maintaining thin film properties. In previous studies, monolayers were fabricated by various methods on small substrates, but processes were complicated and difficult to form monolayers with large area. We used rod coating equipment with a small amount of coating liquid to form a HCP (hexagonal closed packing) coating of PMMA beads on PET(poly(ethylene terephthalate)) substrate with $20cm{\times}20cm$ size. We observed that changes in morphologies of monolayers by using the solvents with different boiling points and vapor pressures, by adapting surfactants on particles and by applying plasma treatment on substrates. The coverage was increased by 20% by optimizing the coating conditions including meniscus of beads, control of the attraction - repulsion forces and surface energy. This result can potentially be applied to optical films and sensors because it is possible to make a uniform and large-scale monolayer in a simple and rapid manner when it is compared to the methods in previous studies.