• 대한기계학회논문집A
• /
• 제24권1호
• /
• pp.87-93
• /
• 2000

Warm, forming technique which is one of the new forming technologies to improve formability of sheet metal is applied to the cylindrical cup drawing of stainless-aluminum. clad sheets. In experiments the temperature of die and blank holder is varied from room temperature to 18$0^{\circ}C$, while the punch is cooled by circulation of coolant to increase the fracture strength of workpiece on the punch corner area. Test materials chosen for experiments are STS304-A1050-STS304, STS304-A1050-STS430 clad sheets and A1050-0 aluminum sheet. Teflon film as a lubricant is used on both sides of a workpiece. The limit drawing ratio as well as quality of drawn cups(distribution of thickness and hardness)are investigated and validity of warm drawing process is also discussed.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 금형가공 심포지엄
• /
• pp.136-143
• /
• 2002

Warm draw die technique which is one of the new forming technologies to improve formability of sheet metal is applied to the cylindrical and square cup drawing of stainless-aluminum clad sheets. In experiments the temperature of die and blank holder is varied from room temperature to $180^{\circ}C$, while the punch is cooled by circulation of coolant to increase the fracture strength of workpiece on the punch comer area. Test materials chosen for experiments are STS304-A1050-STS304 clad sheets. Teflon film as a lubricant is used on both sides of a workpiece. The limit drawing ratio and relative drawing depth as well as quality of drawn cups(distribution of thickness)are investigated and validity of warm drawing process is also discussed. No separation between each laminated material after drawing occurred through inspection by microscope as well as application of penetrant remover and bond strength test. Therefore, warm forming technique was confirmed to give better results in deep drawing of stainless clad sheet metal.

• 대한화장품학회지
• /
• 제44권3호
• /
• pp.211-218
• /
• 2018

즉각 리프팅 화장품은 피부 표면에 주름을 펴주는 다양한 필름 형성제를 함유하고 있다. 그러나 대부분의 필름 형성 고분자는 점착성이 있으며, 피부에 문지르면 밀려 나오는 현상이 있다. 본 연구에서는 신속한 박막 형성 효과가 있는 규산나트륨이 피부 표면에 미치는 영향 및 즉각적인 주름 감소 효과에 초점을 두었다. 물유리 또는 가용성 유리로도 알려진 규산나트륨은 산화나트륨과 실리카를 함유한 화합물이다. 규산나트륨은 물에 쉽게 용해되어 알칼리성 용액을 생성하는 흰색 분말이다. 규산나트륨은 중성 및 알칼리성 용액에서 안정적이며, 규산나트륨 용액은 공기 중에서 건조되어 경화되고 박막을 신속하게 형성한다. 해당 용액을 피부에 도포할 경우, 물 증발 및 이온 결합 재형성에 의해 얇은 막이 형성된다. 또한 피부 표면에 강한 실록산(Si-O) 결합을 형성한다. 이러한 고착성을 화장품에 적용하면 탁월한 피부 수축 효과를 나타낼 수 있다. 규산나트륨 용액은 적절한 농도로 배합될 경우, 피부에 필름을 형성하여 리프팅 효과를 제공할 수 있다. 그러나 높은 농도의 규산나트륨이 적용될 경우, 피부 자극을 일으킬 수 있다. 본 연구에서는 끈적임이 없고, 밀림 현상이 없는 피부 탄력 관리 제형을 개발하기 위해 규산나트륨의 농도 및 다른 고정제와의 바람직한 조합을 연구했다. 규산나트륨과 다양한 증점 시스템을 사용하여 즉각적인 리프팅 효과가 있는 젤 제형을 개발했다. 다양한 증점제 중에서 알루미늄 마그네슘 실리케이트는 단시간에 느껴지는 리프팅 효과를 위해 규산나트륨과 가장 우수한 상용성을 지닌다. 즉각적인 물리적 리프팅 젤은 피부 임상 시험을 통해 낮은 자극성을 지니고 있음을 확인했다.

• 한국정밀공학회지
• /
• 제22권1호
• /
• pp.109-114
• /
• 2005

In this study, to develop a flash-less mold for forming of shoe-midsole, experiments and forming analysis were carried out. In order to reduce the extra-materials, the final preform has been modified by the experiment of pressure forming at the room temperature. To measure the contact status of parting surface of mold, the pressure film has been used. The midsole mold of the wedge structure type has been developed for the improvement of the contact status. The vertical pressing mold structure was introduced for the production of a flash-less midsole. By the investigation, flash of shoe-midsole was considerably reduced.

• 소성∙가공
• /
• 제4권4호
• /
• pp.345-352
• /
• 1995

Warm deep drawing for optimum forming conditions to give the maximum drawing depth is investigated and compared with the results from experiments performed at room temperature. Experiments which draw square cups of STS 304 stainless steel sheet under the constant lubrication condition of teflon film are made both in a crank and hydraulic press for two kinds of specimens. The maximum drawing depth at warm forming condition reaches 1.4 times the drawing depth at room temperature in a crank press, whereas 1.6 times in a hydraulic press, and also more uniform distribution of thickness in case of warm deep drawn cup is observed. The effects of other factors on formability, such as forming temperature, speed of press and cooling of punch are examined and discussed.

• 한국정밀공학회지
• /
• 제22권1호
• /
• pp.103-108
• /
• 2005

In this study, to develop a flash-less mold for forming of shoe-outsole, experiments and forming analysis were carried out. In order to reduce the extra-materials, offset method and mass distribution method are used in the preform design. The vertical mold structure pressing the preform was introduced to produce a flash-less shoe-sole. To measure the contact status of parting surface of mold, the pressure film has been used. The guide-gutter system and the continuous pressing mold have been developed for the discharge of extra-materials and re-pressing. By the investigation, flash of shoe-outsole was considerably reduced.

• 펄프종이기술
• /
• 제40권3호
• /
• pp.9-14
• /
• 2008

Agar-agar extracted from red algae was used as a surface sizing material for paper after filtering, bleaching, and viscosity adjustment by oxidative depolymerization. Oxidized starches from corn and tapioca were compared to agar-based surface size in the respects of paper surface modification, strength improvement, and printability. Agar-based surface size showed high strength improvement and good printability as much as starch-based ones except film forming ability, which may be improved by adding additives, and demonstrated its great potential to be used as inexpensive and high quality surface size in future.

• Archives of Pharmacal Research
• /
• 제28권3호
• /
• pp.364-369
• /
• 2005

HPMC (Hydroxypropyl methylcellulose) was chemically modified, using maleic anhydrides, to obtain pH-sensitive HPMCAM (Hydroxypropyl methylcellulose acetate maleate) polymers for use as novel duodenum-specific coating agents. The pharmaceutical properties of HPMCAM, such as film forming, acid values, pH-sensitive values, water vapor permeability, tensile strength and Tg, were investigated, and found to show good film forming properties. The pH­sensitive values were 3.0 to 3.7. In vitro results demonstrate that HPMCAM could completely suppress drug release within 2h in a simulated gastric fluid (pH 1.2) and rapidly release the drug in a simulated pathological duodenal fluid (pH 3.4). These results indicate that HPMCAM might be a useful material for a duodenum-specific drug delivery system.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.41-43
• /
• 2004

Dielectric thin films of $(Pb_{0.72}La_{0.28})Ti_{0.93}O_3$ were deposited on $Pt(111)/Ti/SiO_2/Si$ substrates in situ by pulsed laser deposition(PLD) and annealed with different gases which are forming gas and oxygen gas, respectively. The diffusion of hydrogen into the ferroelectric film was caused by annealing process and resulted in the destruction of polarization. The dielectric properties of forming gas annealed PLT thin films, which are dielectric constant, ferroelectric characteristic, and leakage current characteristics, were degraded

• Journal of Microbiology and Biotechnology
• /
• 제11권2호
• /
• pp.193-198
• /
• 2001

Preparation of antibacterial biopolymer film which is suitable for food packaging film was investigated using K-carrageenan as a base material. K-Carrageenan showed good biodegradability and film-forming characteristic but poor mechanical properties under humid condition. Also, various bacteria grew well on its surface. The poor mechanical properties could be improved by mixing with alginate at a 1:1 ratio and crosslinking with $CaCl_2$ solution. Antibacterial property coul be provided by modifying the K-carrageenan film surface with acrylic acid plasma followed by ion-exchange with $Ag^+$ ions. Such prepared film still showed good biodegradability by various fongi.