• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.97.2-97.2
• /
• 2010

유리기판을 이용하여 제조되는 미세 결정질 실리콘 박막 태양전지에서 진성 반도체층(i ${\mu}c$-Si:H layer, i층)은 태양전지의 광 흡수층으로 사용되기 때문에 그 특성은 매우 중요하다. 특히, i층의 결정분율 변화는 태양광의 흡수파장 및 효율을 결정하여 준다. 본 연구에서는 i층 증착시 $SiH_4$ 가스의 농도 변화 및 $SiH_4$ 가스 profiling을 통하여 i층의 결정분율을 변화하였으며, 이에 따른 i층 단위박막과 미세결정질 태양전지 특성변화를 분석 하였다. i층의 $SiH_4$ 가스 농도가 증가함에 따라 i층 단위박막의 결정분율은 증가하였으며, 전기 전도도는 감소하였다. 또한, i층의 $SiH_4$ 가스 농도를 점차 증가하며 profiling 하여 증착한 박막은 동일 가스 농도로 증착한 박막보다 전기 전도도가 감소하였고, 증착속도는 증가하였다. 이와 같은 다양한 i층들은 'Raman spectroscopy'를 통하여 결정분율 변화를 측정하였다. 또한, 이 박막들을 광 흡수층으로 사용하는 미세결정질 태양전지를 제조하고, 태양전지의 효율, 양자효율, 암전류 특성들을 단위박막 특성과 연계하여 분석하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.1265-1268
• /
• 2005

In this study, the synthesis and semiconducting properties of cation and defect-doped $KTaO_3$ film is reported. $KTaO_3$ is an important material for optoelectronic and tunable microwave applications. It is an incipient ferroelectric with a cubic structure that becomes ferroelectric when doped with Nb. While numerous studies have investigated the thin-film growth of semiconducting perovskites, little is reported about semiconducting $KTaO_3$ thin films. In this work, the films were grown on (001) MgO single crystal substrates using pulsed-laser deposition. Semiconducting behavior is achieved by inducing oxygen vacancies in the $KTaO_3$ lattice via growth in a hydrogen atmosphere. The resistivity of semiconducting $KTaO_3:Ca$ films was as low as 10cm, and n-type semiconducting behavior was indicated. Hall mobility and carrier concentration were $0.27cm^2/Vs$ and $3.21018cm^{-3}$, respectively. Crystallinity and microstructure of the $KTaO_3:Ca$ films were examined using X-ray diffraction and field-emission scanning microscopy.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2016년도 추계학술대회 논문집
• /
• pp.189-189
• /
• 2016

In this study, the Al-rich AlTiSiN thin films that consisted of TiN/AlSiN nano-multilayers were deposited on the steel substrate by magnetron sputtering, and their high-temperature oxidation behavior was investigated, which has not yet been adequately studied to date. Since the oxidation behavior of the films depends sensitively on the deposition method and deposition parameters which affect their crystallinity, composition, stoichiometry, thickness, surface roughness, grain size and orientation, the oxidation studies under various conditions are imperative. AlTiSiN nano-multilayer thin films were deposited on a tool steel substrate, and their oxidation behavior of was investigated between 600 and $1000^{\circ}C$ in air. Since the amount of Al which had a high affinity for oxygen was the largest in the film, an ${\alpha}-Al_2O_3-rich$ scale formed, which provided good oxidation resistance. The outer surface scale consisted of ${\alpha}-Al_2O_3$ incoporated with a small amount of Ti, Si, and Fe. Below this outer surface scale, a thin ($Al_2O_3$, $TiO_2$, $SiO_2$)-intermixed scale formed by the inwardly diffusing oxygen. The film oxidized slower than the $TiO_2-forming$ kinetics and TiN films, but faster than ${\alpha}-Al_2O_3-forming$ kinetics. During oxidation, oxygen from the atmosphere diffused inwardly toward the reaction front, whereas nitrogen and the substrate element of iron diffused outwardly to a certain extent.

• 한국전기전자재료학회논문지
• /
• 제26권4호
• /
• pp.304-308
• /
• 2013

For the application to the window layer of $Cu(In,Ga)Se_2$(CIGS) solar cell, zinc oxide(ZnO) thin film was deposited at various temperatures by in-line pulsed DC sputtering. From the structural, optical, and electrical investigation and analysis, it was possible to obtain the lower thickness, the lower resistivity, and the higher transmittance at a higher process temperature. The energy band gap of ZnO was calculated using the transmittance data and was analyzed in terms of the dependency on temperature. From the X-ray diffraction(XRD) results, it was possible to conclude that a dominant peak was found about $34.2{\sim}34.6^{\circ}$(111) and crystallinity was obtained at a temperature above $150^{\circ}C$.

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권1호
• /
• pp.72-77
• /
• 2013

RF 마그네트론 스퍼터링법의 스퍼터링 조건에 따른 TFT 구동회로를 위한 ZnO 박막의 구조적 특성에 관해 연구하였다. ZnO 박막은 RF 파워 및 증착압력을 변화시킴으로서 성장시켰다. 구조적 특성은 X-선 회절 분석기(XRD)와 원자력간 현미경(AFM)에 의해 분석되었다. ZnO 박막은 100W의 RF 파워에서 충분한 결정도를 가졌다. 그러나 RF 파워가 증가함에 따라 ZnO 박막의 표면 거칠기가 증가하였고 증착압력이 5mTorr에서 15mTorr로 증가함에 따라 ZnO(002) 피크의 반치폭(FWHM)이 증가하였다.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2009년도 춘계 종합학술대회 논문집
• /
• pp.807-809
• /
• 2009

압전성을 갖는 산화아연 박막을 스퍼터링을 이용하여 실리콘 기판위에 증착하였고 여러 증착 공정변수들이 물성에 미치는 영향과 박막의 구조적 특성 및 전파경계조건을 고찰하였다. 특히, 평탄한 표면을 갖는 압전 박막을 제조하여 전파 특성에 우수한 증착조건을 제시하고 탄성표면파의 전파및 경계조건을 분석한다. 박막의 구조적 특성 분석을 위하여 여러가지 증착조건 중 아르곤과 산소의 가스비율 과 기판온도가 박막의 제조에 미치는 특성을 분석하였다. 스퍼터링 가스인 산소양이 50%이상으로 증가할수록 박막의 표면 거칠기가 나빠지는 특성을 보였다. 비저항과 표면형상은 유입되는 산소에 큰 영향을 받는다는 것을 알 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.237-238
• /
• 2008

The films of Vanadium tungsten oxide, $V_{1.85}W_{0.15}O_5$, were grown on Pt/Ti/$SiO_2$/Si substrate by RF sputtering method. The $V_{1.85}W_{0.15}O_5$ thin films deposited on Pt/Ti/$SiO_2$/Si substrates by RF sputtering method exhibited fairly good TCR and dielectric properties. It was found that film crystallinity, dielectric properties, and TCR properties were strongly dependent upon the annealing temperature. The dielectric constants of the $V_{1.85}W_{0.15}O_5$ thin films annealed at $300^{\circ}C$ were 55, with a dielectric loss of 1.435, respectively. Also, the TCR values of the $V_{1.85}W_{0.15}O_5$ thin films annealed at $300^{\circ}C$ were about -3.6%/K.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.239-240
• /
• 2008

The $V_{1.9}W_{0.1}O_5$ thin films deposited on Pt/Ti/$SiO_2$/Si substrates by RF sputtering method exhibited fairly good TCR and dielectric properties. It was found that film crystallinity, dielectric properties, and TCR properties were strongly dependent upon the annealing temperature. The dielectric constants of the $V_{1.9}W_{0.1}O_5$ thin films annealed at $400^{\circ}C$ were 39.6, with a dielectric loss of 0.255, respectively. Also, the TCR values of the $V_{1.9}W_{0.1}O_5$ thin films annealed at $400^{\circ}C$ were about -3.15%/K.

• 한국포장학회지
• /
• 제23권2호
• /
• pp.67-74
• /
• 2017

In this work, the effects of nano $TiO_2$ on functionality and stability of low density polyethylene (LDPE) composite films were investigated for food packaging application. LDPE-nano $TiO_2$ composite films were prepared with various $TiO_2$ contents (0, 0.5, 1.0, 3.0 and 5.0wt%) by melt-extrusion and their basic properties such as crystallinity, chemical bonds and surface morphology were examined by XRD, FTIR and SEM. Ultraviolet (UV) light barrier property of as-prepared LDPE-nano $TiO_2$ composite films was also studied and the presence of nano $TiO_2$ resulted in significant improvement of UV light barrier compared to the pure LDPE film. To evaluate influence of nano $TiO_2$ on LDPE properties required as packaging material, thermal, mechanical, gas barrier and optical properties of LDPE-nano $TiO_2$ composite films were characterized with various analytical techniques including TGA, UTM, OTR, WVTR and UV-vis spectroscopy. As a result, except optical property of LDPE, no significant effects were found in other properties. Opacity of pure LDPE was greatly increased with increasing concentration of nano $TiO_2$.

• 한국세라믹학회지
• /
• 제37권2호
• /
• pp.168-173
• /
• 2000

YMnO3 thin films were prepared on Pt/Ti/SiO2/Si substrate by chemical solution deposition method. The films were crystallized by heat-treatment at 85$0^{\circ}C$ for 1 hour. Effects of an annealing atmosphere(O2, Ar, vacuum) on the crystallization behavior and electridcal properties were investigated. YMnO3 thin films annealed under Ar atmosphere showed a superior crystallinity and a very strong c-aix preferred-orientation which was a polar axis. Leakage current density of the films decreased with lowering oxygen partial pressure of the annealing atmosphere. C-V and P-E ferroelectric hysteresis were observed only in the thin film heat-treated under Ar atmosphere.In order to prepare YMnO3 thin films having both low leakage current and ferroelectricity, the annealing atmsphere should be kept under a proper oxygen partial pressure which was about 1 Pa in this work. Leakage current density at 1 volt, dielectric constant($\varepsilon$r), remanent polarization(Pr), and coercive field(Ec) were 1.7$\times$10-8 A/$\textrm{cm}^2$, 25, 1.08$\mu$C/$\textrm{cm}^2$, and 100 kV/cm, respectively.