• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 C
• /
• pp.900-902
• /
• 1999

This paper deals with the interrupting characteristics of fuses element in different media of arc extinguisher. Aluminum hydro-oxide, boron nitride, silica and there size have been investigated here for their prospects as filling media in heavy current, high breaking capacity fuses. The result of these study are compared with those on silica sand at high current. This study demonstrates that silica sand is far superior filler in fuses for heavy current interrupting then the compound tested.

• 산업기술연구
• /
• 제18권
• /
• pp.1-6
• /
• 1998

This study was conducted to use disused vinyl as biofilm for biological sewage treatment. Efficiency verification was performed on laboratory and on-site plant. In laboratory study, total biochemical oxygen demand(TBOD) removal rate was ranged 94.8~97 % in each hydraulic retention tim(HRT), 12, 16, 20, 24 hr, respectively. At that time, filling rate was 50 %. And effluent TBOD concentration was low ranged 3.64~6.28 mg/L. In on-site plant, TBOD removal rate was ranged 88.2~96.8 % and effluent TBOD concentration was 4.8~17.7mg/L. This concentration was lower than disign effluent concentration, 30mg/L. Total kjeldhal nitrogen(TKN) removal efficiency was ranged 56.8~90.9%. This was resulted higher than Lab. scale treatment efficiency.

• 원예과학기술지
• /
• 제31권6호
• /
• pp.720-725
• /
• 2013

수축성이 강한 코이어더스트가 주요 구성물질로 조제된 혼합상토는 충전량에 따라 용기내의 밀도가 달라지고 결과적으로 공극률(TP), 기상률(AFP) 및 용기용수량(CC)의 상대적인 비율이 변화된다. 따라서 충전량 차이에 따라 변화된 상토의 물리성 변화를 구명하여 작물 재배를 위한 기초자료로 제시하고자 본 연구를 수행하였다. 연구 목적을 달성하기 위해 코이어더스트 + 팽연왕겨(8:2, v/v; coir dust + expanded rice hull, CD + ERH로 지칭), 코이어더스트 + 훈탄(6:4; coir dust + carbonized rice hull, CD + CRH), 그리고 코이어더스트 + 분쇄된 수피(8:2; coir dusts + ground and raw pine bark, CD + GRPB)의 세 종류 상토를 조제하였다. 이 후 직경이 6.0, 7.5, 8.5, 10.5 및 12.5cm의 포트에 최적 가비중을 기초로 90, 100, 110, 120 및 130%가 되도록 상토 충전량을 조절한 후 TP, AFP 및 CC 변화를 측정하였다. 모든 규격의 포트에서 상토 충전량이 많아질수록 TP가 감소하였지만 CD + GRPB 상토보다 CD + ERH 또는 CD + CRH 상토의 감소 정도가 컸다. 상토 충전량이 많아질 경우 CC도 감소하였지만, 동일한 충전 비율에서 포트의 크기가 커질수록 CC의 감소한 정도가 컸다. 상토 충전량이 많아질수록 AFP도 뚜렷하게 감소하였다. 그러나 포트의 직경이 7.5cm보다 적을 때에는 동일한 충전 비율에서 CD + CRH 상토의 AFP가 가장 높았고, 포트의 크기가 8.5cm 이상으로 커질 경우 CD + ERH 상토의 AFP가 가장 높았다. 본 연구에서 상토 충전량 증가는 CC보다 AFP에 더 심한 영향을 미쳤으며 근권부의 가스 교환이 작물 생육에 큰 영향을 미침을 고려할 때 AFP의 감소를 방지할 수 있도록 충전량을 조절해야 한다고 판단하였다. 본 연구 결과는 상토를 이용한 용기재배에서 충전량 차이에 따른 물리성 변화를 예측하기 위한 자료로 활용될 수 있을 것이다.

• 한국정보통신학회논문지
• /
• 제19권1호
• /
• pp.127-135
• /
• 2015

본 연구에서는 DIBR(Depth-Image-Based Rendering) 기법을 사용한 다시점 중간 영상 생성을 하는데 있어서 최종 중간 영상의 화질을 개선하기 위한 방법으로 깊이 정보의 확장과 메쉬 구성 (즉, 표면 재구성) 그리고 이 방법들을 교차 적용하여 어떤 것이 가장 좋은 결과를 낼 수 있는 지에 대해서 실험하였다. 마이크로소프트사에서 제공하는 브레이크 댄서와 발레 영상을 사용하여 실험 결과를 살펴보았고 다양한 틈새 영역 채움 알고리즘을 적용시켜 분석해 보았다. 실험 결과는 기존의 점 구름만을 활용하는 것보다 깊이 정보를 확장하는 방법과 메쉬 구성 방법을 모두 시켰을 때 가장 좋은 결과가 나타났다. 그리고 틈새 영역 채움 알고리즘을 적용하기 전에는 깊이 확장만으로도 충분히 화질이 향상됨을 확인할 수 있었다.

• 한국전자파학회논문지
• /
• 제30권5호
• /
• pp.399-406
• /
• 2019

비균일 지하에 매설된 비금속관에 의한 지표투과레이다(GPR) 신호 특성의 변화를 수치 모의계산을 통해 비교하였다. 지하의 상대유전율 분포는 연속적인 랜덤 매질(CRM) 기법을 이용하여 생성하였다. 비균일 지하에 매설된 비금속관 속을 채우고 있는 물질의 상대유전율 변화에 따른 GPR 신호를 유한차분시간영역(FDTD)법으로 모의계산하였다. 균일 지하와는 달리, 비균일 지하에 매설된 비금속관의 전방 볼록면과 후방 오목면에 의해 발생한 각각의 반사파에 대한 왜곡 특성이 비금속관 내부와 외부 사이의 유전율 차이에 따라 달라짐을 보였다.

• Geomechanics and Engineering
• /
• 제17권3호
• /
• pp.307-316
• /
• 2019

Dam deformation should be strictly controlled for the construction of 300 m-high rockfill dams, so the rockfill materials need to have low porosity. A method of using composite grout is proposed to reduce the porosity of rockfill materials for the construction of high rockfill dams. The composite grout is a mixture of fly ash, cement and sand with the properties of easy flow and post-hardening. During the process of rolling compaction, the grout admixture sprinkled on the rockfill surface will gradually infiltrate into the inter-granular voids of rockfill by the exciting force of vibratory roller to reduce the porosity of rockfill. A visible flowing test was firstly designed to explore the flow characteristics of composite grout in porous media. Then, the compressibility, shear strength, permeability and suffusion susceptibility properties of composite grout-modified rockfill are studied by a series of laboratory tests. Experimental results show that the flow characteristics of composite grout are closely related to the fly ash content, the water-to-binder ratio, the maximum sand size and the content of composite grout. The filling of composite grout can effectively reduce the porosity of rockfill materials, as well as increase the compression modulus of rockfill materials, especially for loose and gap-graded rockfill materials. Composite grout-modified rockfill tends to have greater shear strength, larger suffusion erosion resistance, and smaller permeability coefficient. The composite grout mainly plays the roles of filling, lubrication and cementation in rockfill materials.

• 한국물환경학회지
• /
• 제24권4호
• /
• pp.436-441
• /
• 2008

This work experimentally determined the effect of operating parameters such as temperature and solid retention time (SRT) on the phosphorus removal of municipal wastewater with waste-tire media. The experiments were carried out in pilot-scale moving bed biofilm reactor filled at a 0.15 filling ratio with the media. Total phosphorus (TP) removal efficiency was $91{\pm}5$, $75{\pm}16$, and $59{\pm}14%$ at the temperature of 9~10, 10~20, and $20{\sim}26^{\circ}C$, respectively. TP removal efficiency was $71{\pm}17$, $74{\pm}16$, $74{\pm}16$, and $68{\pm}18%$ at the SRT of 3.5~5, 5~10, 10~15, and 15~20 days, respectively. At the nitrate concentration of 1~3, 3~6, and 6~9 mg/L, TP removal efficiency was $82{\pm}9$, $68{\pm}18$, $47{\pm}7%$, respectively. The concentration of total phosphorus in the effluent was $0.1{\sim}1.8(0.8{\pm}0.4)mg/L$ regardless of operating conditions, which meets Korean phosphorus limit value, 2 mg/L, for discharge into receiving waters.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제4권5호
• /
• pp.691-708
• /
• 2010

An important issue of supporting multi-users with diverse quality-of-service (QoS) requirements over wireless networks is how to optimize the systematic scheduling by intelligently utilizing the available network resource while, at the same time, to meet each communication service QoS requirement. In this work, we study the problem of a variety of communication services over multi-media heterogeneous cognitive OFDM system. We first divide the communication services into two parts. Multimedia applications such as broadband voice transmission and real-time video streaming are very delay-sensitive (DS) and need guaranteed throughput. On the other side, services like file transmission and email service are relatively delay tolerant (DT) so varying-rate transmission is acceptable. Then, we formulate the scheduling as a convex optimization problem, and propose low complexity distributed solutions by jointly considering channel assignment, bit allocation, and power allocation. Unlike prior works that do not care computational complexity. Furthermore, we propose the FAASA (Fairness Assured Adaptive Sub-carrier Allocation) algorithm for both DS and DT users, which is a dynamic sub-carrier allocation algorithm in order to maximize throughput while taking into account fairness. We provide extensive simulation results which demonstrate the effectiveness of our proposed schemes.

• Structural Engineering and Mechanics
• /
• 제81권6호
• /
• pp.769-780
• /
• 2022

This paper studies the dynamic behavior of laminated composite circular cylindrical shells interacting with a fluid. The mathematical formulation of the dynamic problem for an elastic body is developed based on the variational principle of virtual displacements and the relations of linear elasticity theory. The behavior of an ideal compressible fluid is described by the potential theory, the equations of which together with boundary conditions are transformed to a weak form. The hydrodynamic pressure exerted by the fluid on the internal surface of the shell is calculated according to the linearized Bernoulli equation. The numerical implementation of the mathematical formulation has been done using the semi-analytical finite element method. The influence of the ply angle and lay-up configurations of laminated composites on the natural vibration frequencies and the hydroelastic stability boundary have been analyzed for shells with different geometrical dimensions and under different kinematic boundary conditions set at their edges. It has been found that the optimal value of the ply angle depends on the level of filling of the shell with a fluid. The obtained results support the view that by choosing the optimal configuration of the layered composite material it is possible to change upwards or downwards the frequency and mode shape, as well as the critical velocity for stability loss over a wide range.

• 방송공학회논문지
• /
• 제2권2호
• /
• pp.125-135
• /
• 1997

This paper is concerned with realistic mainpulation of content in video sequences. Manipulation of content in video sequences is one of the content-based functionalities for MPEG-4 Visual standard. We present an approach to synthesizing video sequences by using the intermediate outputs of three-dimensional (3D) motion and depth analysis. For concreteness, we focus on video showing 3D motion of an observer relative to a scene containing planar runways (or roads). We first present a simple runway (or road) model. Then, we describe a method of identifying the runway (or road) boundary in the image using the Point of Heading Direction (PHD) which is defined as the image of, the ray along which a camera moves. The 3D motion of the camera is obtained from one of the existing 3D analysis methods. Then, a video sequence containing a runway is manipulated by (i) coloring the scene part above a vanishing line, say blue, to show sky, (ii) filling in the occluded scene parts, and (iii) overlaying the identified runway edges and placing yellow disks in them, simulating lights. Experimental results for a real video sequence are presented.