• Korean Journal of Agricultural Science
• /
• v.40 no.3
• /
• pp.203-208
• /
• 2013

Differences in the filling amount of substrates in container can influence severely on the soil physical properties and crop growth. This research was conducted to secure the fundamental informations related to the changes in soil physical properties as influenced by the filling amount of coir dust-based substrates in container. For the experiment, three substrates were formulated by blending coir dust (CD) with expanded rice hull (CD+ERH, 8:2, v/v), carbonized rice hull (CD+CRH, 6:4, v/v) or ground and aged pine bark (CD+GAPB, 8:2, v/v). Based on the optimum bulk density, the amount of substrates filled in 347.5mL aluminum cylinder were adjusted to 90, 100, 110, 120, and 130%. Then the changes in total porosity (TP), container capacity (CC), and air-filled porosity (AFP) by various filling amounts were measured. The TP decreased linearly in CD+ERH and CD+GAPB and quadratically in CD+CRH as the filling amounts of the media increased from 90% to 130%. The CC in CD+ERH and CD+GAPB media increased as the filling amount increased from 90% to 120%, then decreased in 130%, showing quadratic change. The CC in CD+CRH was the highest in 90% filling amount and decreased gradually as the filling amount of root medea increased. The AFPs in CD+ERH and CD+GAPB media were 38 and 37%, respectively in 90% filling amount and they decreased drastically until 110% filling, then gradually in 120 and 130% filling amount showing the quadratic changes. The AFP of CD+CRH at 90% filling amount was 22% and it decreased as the filling amount increased until 130%, showing linear change. These results indicate that the increase in filling amount of substrates influenced more severely the AFP than CC, and careful consideration on container filling is required to provide a better root condition thus maximize crop growth.

• Korea-Australia Rheology Journal
• /
• v.21 no.1
• /
• pp.71-79
• /
• 2009

The incomplete saturation and the void formation during the resin infiltration into fibrous porous media in the resin transfer molding process cause failure in the final product during its service. In order to better understand flow behavior during the filling process, a finite-element scheme for transient flow simulation across the micro-structured fibrous media is developed in the present work. A volume-of- fluid (VOF) method has been incorporated in the Eulerian frame to capture the evolution of flow front and the vertical periodic boundary condition has been combined to avoid unwanted wall effect. In the microscale simulation, we investigated the transient filling process in various fiber structures and discussed the mechanism leading to the flow fingering in the case of random fiber distribution. Effects of the filling pressure, the shear-thinning behavior of fluid and the volume fraction on the flow front have been investigated for both intra-tow and the inter-tow flows in dual-scale fiber tow models.

• Transactions of the Society of Information Storage Systems
• /
• v.1 no.2
• /
• pp.192-196
• /
• 2005

In this paper, we investigated the possibility of replicating patterned media by nano-injection molding process with a metallic nano-stamper. The original nano-master was fabricated by E-beam lithography and ICP etching process. The metallic nano-stamper was fabricated using a nanoimprint lithography and nano-electroforming process. The nano-patterned substrate was replicated using a nano-injection molding process without additional etching process. In nano-injection molding process, since the solidified layer, generated during the polymer filling, deteriorates transcribability of nano patterns by preventing the polymer melt from filling the nano cavities, an injection-mold system was constructed to actively control the stamper surface temperature using MEMS heater and sensors. The replicated polymeric patterns using nano-injection molding process were as small as 50 nm in diameter, 150 nm in pitch, and 50 nm in depth. The replicated polymeric patterns can be applied to high density patterned media.

• Journal of Broadcast Engineering
• /
• v.26 no.3
• /
• pp.327-330
• /
• 2021

In this paper, a new noise filling method is proposed for improving the performance of the 3D audio codec. In the new method, the core band is limited up to MAX_SFB, not up to the IGF start frequency. And the noise filling is applied to all frequency range of the IGF source patches. We conduct the MUSHRA test and find that the proposed noise filling method demonstrates better performance than the conventional method.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2012.07a
• /
• pp.260-261
• /
• 2012

본 논문에서는 Unified Speech and Audio Coding (USAC)에 적용된 Noise Filling의 부호화 과정에서 음질 왜곡 정도에 따라 Noise level을 설정하는 방법을 제안한다. USAC는 Moving Picture Experts Group (MPEG)에서 표준화한 최신의 음성/오디오 통합 코덱으로 현존하는 코덱 중에 최고의 성능을 가지고 있다. 하지만, 복호화기 기술만 표준화하여, 인코더를 설계하는 방법에 따라 음질의 차이가 존재한다 현재 오픈 소스 기반으로 진행되고 있는 프로젝트 JAME에서는 이러한 음질 차이를 극복하고, USAC에 적용된 핵섬 인코더 기술의 성능을 최대화 할 수 있는 여러 가지 방법을 포함하고 있다. 그 중 Noise Filling은 저 전송률 부호화 과정에서 양자화 되지 않는 스펙트럼에 대하여 일정한 noise level을 넣어 인지적으로 음질을 향상시키는 방법이다. 제안된 Noise Filling 부호화 방법은 현재 프레임의 음질 왜곡 정도를 반영하여, noise-like 신호 성분을 더욱 정교하게 부호화 할 수 있게 하였다.

• Smart Media Journal
• /
• v.3 no.4
• /
• pp.28-34
• /
• 2014

Recently the depth-image-based rendering (DIBR) method is usually used in 3D image application filed. Virtual view image is created by using a known view with associated depth map to make a virtual view point which did not taken by the camera. But, disocclusion area occur because the virtual view point is created using a depth image based image 3D warping. To remove those kind of disocclusion region, many hole filling methods are proposed until now. Constant color region searching, horizontal interpolation, horizontal extrapolation, and variational inpainting techniques are proposed as a hole filling methods. But when using those hole filling method some problem occurred. The different types of annoying artifacts are appear in texture region hole filling procedure. In this paper to solve those problem, the multi-directional extrapolation method is newly proposed for efficiency of expanded hole filling performance. The proposed method is efficient when performing hole filling which complex texture background region. Consideration of directionality for hole filling method use the hole neighbor texture pixel value when estimate the hole pixel value. We can check the proposed hole filling method can more efficiently fill the hole region which generated by virtual view synthesis result.

• Advances in Traditional Medicine
• /
• v.10 no.4
• /
• pp.231-238
• /
• 2010

Sterile Products may be broadly classified into two main categories, according to the manner in which they are produced: those which are sterilized after the product has been filled and sealed in the final container(s) ("terminally sterilized" products) and those where the sterilization stage (or stages) takes place is it before or after the bulk product filled in to final container. In this latter instance, all subsequent processing (typically, the filling and sealing operations) must be conducted aseptically in order to prevent recontamination of the sterilized product. The two most common pharmaceutical applications of aseptic processing methods are (a) the filling of liquid products following sterilization by filtration and (b) the filling of previously sterilized bulk powder products. An aseptic processing operation should be tested using a microbiological growth medium (media fill) during lyophilized injection formulation, filling, loading, lyophilisation, stoppering, and unloading activities.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.17 no.1
• /
• pp.123-135
• /
• 1987

The author observed the effects of retrograde infusion of water soluble contrast media (Tele- brix 30) on the rabbit submandibular glands and compared the effects of different degrees of filling. 26 rabbits were divided into 2 groups of 12 each as experimentals and I group of 2 as normal controls. One experimental group was filled with 0.2㎖ and the other with 0.4㎖. Right submandibular gland of each rabbit was infused with contrast media and left one with physiologic saline as a experimental control, at a constant rate of 0.12㎖/min. using an infusion pump via the main excretory duct. Immediately after the infusion of contrast media, oblique lateral radiographs of the glands were made with occlusal film in order to confirm the glandular filling. The rabbits were sacrificed after varying periods (1, 8, 24 hours and 3, 6, 10 days) and the tissues were prepared for light and electron microscopic examination. The results were as follows: 1. In glands filled with 0.2㎖ contrast media, the initial changes were a few vacuole formation in the acini and slight dilation of the intralobular duct. The moderately severe changes such as vacuole formation in the acini, the abnormal substructure within the secretory granule, dilation of acinar and intercalated duct lumen, scalloping of striated duct lumen and inflammatory cell infiltrate were observed at 3 days. The general appearance was successively recovered, so the tissue had a normal appearance at 10 days. 2. In glands filled with 0.4㎖ contrast media, the most prominent alterations such as severe acinar atrophy, decreased number of secretory granules, proliferation of connective tissue stroma and pronounced inflammatory cell infiltrates appeared at 6 days. Although the general appearance returned to be almost normal at 10 days, acinar cells showed some atrophy and decreased secretory granules. 3. In glands subjected to 0.4㎖ infusion, the alterations were more severe and the recovery was slower than those seen in the glands to 0.2㎖ infusion.

• International journal of advanced smart convergence
• /
• v.13 no.1
• /
• pp.129-139
• /
• 2024

In digital marketing, the strategic use of emojis in social media advertising, particularly on the Xiaohongshu app, significantly influences consumer acceptance and purchase behavior. This study examines the impact of emoji-laden advertisements and the role of brand metaphorical warmth on consumer perceptions. Employing a tailored questionnaire, the research explores how emojis affect brand advertisement reception, filling a gap in empirical research on emoji advertising effectiveness. Findings indicate that emojis, when used judiciously, enhance consumer acceptance and contribute to a positive brand perception. However, excessive use may undermine trust. Brand metaphorical warmth emerges as a crucial factor, suggesting that emojis can effectively convey warmth, fostering a deeper emotional connection with consumers. These insights offer practical implications for refining social media marketing strategies, advocating for a balanced approach to emoji usage in advertisements to optimize engagement and influence consumer behavior.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.10a
• /
• pp.302-305
• /
• 2007

In recent years, many researches on new storage media with high capacity and information are developing. For manufacture of optical storage with high capacity, the injection molding process is generally used. In order to increase the filling ratio of the injection molding structure, the injection molding process required for high injection pressure, packing pressure and temperature control of the mold. However, conventional injection molding process is difficult to increase the filling ratio using injection master with the range of several nanometers and high aspect ratio. In order to improve and increase filling ratio of nano-structure with high aspect ratio, the active temperature control of injection mold was used. Experimental conditions were used injection pressure, time and temperature. Consequently, by using the peltier device into injection mold, we carried out the efficient and active temperature control of mold at low cost.