• 제목/요약/키워드: fillet welds

검색결과 53건 처리시간 0.022초

응력비 변화에 따른 십자형 접합부의 피로거동 평가 (An Estimation of the Fatigue Behavior on the Cruciform Type Specimen by Variation of the Stress Ratio)

  • 김태봉;서상구;우상익
    • 한국안전학회지
    • /
    • 제15권1호
    • /
    • pp.140-145
    • /
    • 2000
  • 강교량 부재인 십자연결형 접착부를 하중비전달형과 하중전달형으로 각각 제작하여 피로 강도 저감 정도와 응력비 변화에 따른 피로거동을 평가하였다. 또한, 필렛용접 비드의 기하학적 형상에 따른 응력집중을 확인하기 위하여 전산해석을 수행하였다. 피로실험 결과 시험편의 응력비가 피로 강도에 미치는 영향은 거의 없는 것으로 나타났으며, 하중전달형 시험편과 대부분의 밀착 시험편은 용접지단부에서 균열이 발생하여 모재가 파단됨을 알 수 있었다. 모재가 파단된 십자형 시험편의 피로강도는 ${\Delta}\sigma_c$=63.5 MPa로 하중 비전달형 시험편의 피로강도 ${\Delta}\sigma_c$=83.8 MPa보다 약 24% 작게 나타났다. 본 연구대상 시험편은 도로교 시방서상에 모재단면에 대한 응력으로 피로범주 C등급으로 규정하고 있으므로, 실험결과를 모재단면에 대한 응력으로 피로강도를 환산하면 78.27 MPa로 허용 피로강도보다 작은 것으로 나타났다.

  • PDF

유전적 알고리듬을 이용한 용접변형 해석에 관한 연구 (A Study about Analysis of Weld Distortion using Genetic Algorithm)

  • 김일수;김학형;장한기;김희진;곽성규;유회수;심지연
    • Journal of Welding and Joining
    • /
    • 제27권4호
    • /
    • pp.54-59
    • /
    • 2009
  • In the process to manufacture for metallic structures, control of welding deformation is one of an important problems connected with reliability of the manufactured structures so that welding deformation should be measured and controlled with quickly and actively. Also, welding parameters which have as lot of effects on welding deformation such as arc voltage, welding current and welding speed can also be controlled. The objectives for this study were to develop a simple 2-D FEM to calculate not only the transient thermal histories but also the sizes of fusion and heat-affected zone (HAZ) in multi pass arc welds including the butt and fillet weld type with dissimilar thickness, and to concentrate on a developed model for the finding the parameters of Godak's moving heat source model based on a GA. The developed model includes a GA program using MATLB and GA toolbox, and a batch mode thermal model using ANSYS software. Not only the thermal model was verified by comparison with Goldak's work but also the developed model was validated with molten zone section experimental data.

원자로 상부헤드 제어봉구동장치 관통노즐 형상이 J-Groove 용접잔류응력에 미치는 영향 (Effects of Geometry of Reactor Pressure Vessel Upper Head Control Rod Drive Mechanism Penetration Nozzles on J-Groove Weld Residual Stress)

  • 김주희;김윤재;이성호;허남용;배홍열;오창영;김지수;박흥배;이승건;김종성;허남수
    • 대한기계학회논문집A
    • /
    • 제35권10호
    • /
    • pp.1337-1345
    • /
    • 2011
  • 가압경수로형 원자로의 원자로압력용기 상부헤드에는 많은 제어봉구동장치(CRDM) 노즐이 분포한다. 최근 10 여 년 동안 제어봉구동장치 alloy 600 CRDM 노즐에서 균열 발생 사례가 증가하고 있으며, 이는 용접과 연관성이 매우 깊은 것으로 알려져 있다. CRDM 노즐에서 발생하는 축 및 원주방향 균열은 유럽과 미국의 원자력 발전소에서 발견되었으며, 사고의 원인은 용접 잔류응력 및 작용하중에 기인하는 일차수응력부식균열(PWSCC)임이 확인되었다. 이러한 이유로 본 연구에서는 유한요소해석을 통해 한국형 원자로의 CRDM 관통 노즐 용접부를 대상으로 용접 잔류응력을 예측하였으며, 특히, 관통노즐의 위치와 형상, 용접부 필렛 형상 및 인접노즐 용접에 의한 영향을 분석하였다.