• Elastomers and Composites
• /
• 제54권1호
• /
• pp.22-29
• /
• 2019

Chitosan-polyvinyl alcohol (PVA) -bamboo charcoal/silica (CS-PVA-BC/SI) hybrid fillers with compatibilized styrene-butadiene rubber (SBR) composites were fabricated by the interpenetrating polymer network (IPN) method. The structure and composition of the composite samples were characterized by scanning electron microscope (SEM) and Fourier transform infrared spectroscopy (FT-IR). The viscoelastic behaviors of the rubber composites and their vulcanizates were explored using a rubber processing analyzer (RPA) in the rheometer, strain sweep and temperature sweep modes. The storage and loss moduli of SBR increased significantly with the incorporation of different hybrid fillers, which was attributed to the formation of an interphase between the hybrid fillers and rubber matrix, and the effective dispersion of the hybrid fillers. The mechanical properties (hardness, tensile strength, oxygen transmission rate, and swelling rate) of the composite samples were characterized in detail. From the results of the mechanical test, it was found that BC-CS-PVA0SBR had the best mechanical properties. Therefore, the BC-CS-PVA hybrid filler provided the best reinforcement effects for the SBR latex in this research.

• 한국산학기술학회논문지
• /
• 제13권10호
• /
• pp.4385-4391
• /
• 2012

본 연구는 전단혼합과 초음파 처리를 통해 충전재의 분산을 증대시켜 복합재료 시편을 만들고, 분산의 적정성을 판단하기 위해서 주사전자현미경 이미지를 이용하며, 인장실험을 통해 기계적 물성치를 측정하고 고찰하였다. 초음파 처리와 전단혼합 시간 증가를 통해서 개선된 공정으로 만들어진 시편의 경우, 충전재 분산에 대한 정성적인 평가인 SEM 이미지와 정량적인 평가인 인장시험 데이터의 상호 보완을 통해 충전재의 복합재료 수지 내에서의 적절한 분산 여부를 판단할 수 있었다. 인장강도의 측정 결과에서는 충전재가 함유된 모든 시편이 Pure Epoxy 시편 보다 높은 인장 강도를 보였는데, 충전재 0.6wt%에서 가장 높은 인장강도 값을 나타냈다. 0.9wt%와 1.2wt% 시편은 Pure Epoxy 시편보다는 인장강도가 증가하였지만 0.6wt% 시편보다 작은 값을 보였다. 인장강성 측정 결과는 충전재의 함유량이 높아질수록 증가하는 결과를 보였다.

• 폴리머
• /
• 제25권6호
• /
• pp.774-781
• /
• 2001

폐타이어와 폐석분 재활용을 위하여, 불포화 폴리에스터 수지에 폐석분과 폐타이어 분말의 충전량을 변화시켜 폐타이어-폐석분/폴리에스터 혼성 복합재료를 제조하였다. 매트릭스 내에서 충전제의 계면결합력과 분산력을 향상시키기 위하여 실란 커플링제[${\gamma}$-methacryloxy propyl trimethoxy silane(${\gamma}$-MPS)]를 사용하여 표면처리하고 복합재를 제조한 후 구조와 물성을 확인하였다. 실란 커플링제로 충전제를 표면처리한 경우 초기 열분해온도가 상승하고 중량감소율이 감소하였다. 커플링제로 표면처리된 경우 높은 기계적 물성을 얻었으며, 실란 농도 2 wt%에서 매트릭스 및 WTC의 함량에 관계없이 최대값을 나타내었다. 유기 충전제 증가에 따라 복합재의 기공도는 증가하나 표면처리에 의해 감소시킬 수 있으며 유기 충전제의 함량에 따라 기공 크기분포도 변화한다.

• Elastomers and Composites
• /
• 제37권2호
• /
• pp.86-98
• /
• 2002

본 연구에서는 실리카/카본블랙 혼합사용과 카본블랙 단독 사용의 경우 상온 또는 고온에서의 인장강도(modulus) 및 인열저항성, 내cutting성, 내crack성을 비교 평가하였다. 실리카와 카본블랙의 함량비 및 단계배합 방법을 통해 NR 가황물을 제조하였으며, 충전제의 함량은 60phr로 고정하였고, semi-EV 가황시스템을 적용하여 실험을 실시하였다. 실리카의 분산은 25phr이하일 때 양호하였으며, 실리카/카본블랙의 함량비가 25/35인 경우 인열에너지, 내crack특성, 내cutting특성이 가장 우수하였다. 충전제로써 카본블랙 단독사용과 실리카/카본블랙(25/35) 혼합사용의 경우를 비교해 보면, 열화에 따른 modulus 및 인장강도, 인열에너지는 실리카/카본블랙(25/35)을 사용한 시편이 더 낮은 감소율을 나타내었다. Cutting특성에서는 카본블랙 단독 사용보다는 실리카/카본블랙(25/35) 혼합사용의 경우가 더 높은 cutting 저항성을 나타내었다. 내crack 특성 또한 실리카/카본블랙(25/35)을 혼합사용한 경우가 온도에 따른 더 높은 변형에너지 완화율(Gp)에도 불구하고 더 낮은 크랙성장속도를 나타내었다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.217-220
• /
• 2009

Conductive adhesives have been investigated for use in microelectronics packaging as a lead-free solder substitute due to their advantages, such as low bonding temperature. However, high resistivity and poor mechanical behavior may be the limiting factors for the development of conductive adhesives. The metal fillers and the polymer resins provide electrical and mechanical interconnections between surface mount device components and a substrate. As metal fillers used in conductive adhesives, silver is the most commonly used due to its high conductivity and the stability. However the cost of conductive adhesives with silver fillers is much higher than usual lead-free solders and silver has poor electro-migration performance. So, copper can be a promising candidate for conductive filler metal due to its low resistivity and low cost, but oxidation causes this metal to lose its conductivity. In this study, electrically conductive adhesives (ECAs) using surface modified copper fillers were developed. Especially, in order to overcome the problem associated with the oxidation of copper, copper particles were coated with silver, and the silver-coated copper was tested as a filler metal. Especially the effect of silver coating on the electrical resistance just after curing and after aging was investigated. As a result, it was found that the electrical resistance of ECA with silver-coated copper filler was clearly lower and more stable than that of ECA with pure copper filler after curing process. And, during high temperature storage test, the degradation rate of electrical resistance for ECA with silver coated copper filler was quite slower than that for ECA with pure copper filler.

• Advances in concrete construction
• /
• 제8권1호
• /
• pp.65-76
• /
• 2019

This paper investigates the effect of recycled glass powder (RGP) on flowing properties of self-compacting mortars (SCMs) containing different ratios of fillers and superplasticizer dosages. Fly ash (FA), nano-silica (NS), micro-silica (MS), metakaolin (MK) and rice husk ash (RHA) are used as fillers and their synergistic effect with RFP is studied. The effects of fillers and high-range water reducer (HRWR) on flowing ability of mortars are primarily determined by slump flow and V-funnel flow time tests. The results showed that for composites with a higher RGP content, the mortar flowing ability increased but tended to decrease when the composites containing 10% MK or 5% RHA. However, the flowing ability of samples incorporating 5% RGP and 10% SF or 25% FA showed an opposite result that their slump flow spread decreased and then increased with increasing RGP content. For specimens with 3% NS, the influence of RGP content on flowing properties was not significant. Except RHA and MS, the fillers studied in this paper could reduce the dosage of HRWR required for achieving the same followability. Also, the mixture parameters were determined and indicated that the flowability of mixtures was also affected by the content of sand and specific surface area of cement materials. It is believed that excess fine particles provided ball-bearing effect, which could facilitate the movement of coarse particles and alleviate the interlocking action among particles. Also, it can be concluded that using fillers in conjunction with RGP as cementitious materials can reduce the material costs of SCM significantly.

• Journal of Oral Medicine and Pain
• /
• 제47권3호
• /
• pp.148-151
• /
• 2022

Obstructive sialadenitis, one of the diseases that most frequently causes swelling and pain in the salivary glands, is mainly caused by structural obstructions. Sialolithiasis is the most frequent cause of the disease, and other causes include calculus formation, duct strictures, foreign bodies, and anatomical variations. Although there is a possibility that facial fillers directly block the salivary ducts, no cases of obstructive sialadenitis associated with them have been reported yet. We report the case of a 34-year-old female patient who complained of recurrent swelling and pain in the left buccal mucosa. She had undergone facial filler injection procedures on her facial area for cosmetic purposes several years before. Based on the findings of magnetic resonance imaging (MRI) and MR sialography, she was diagnosed with obstructive sialadenitis due to facial fillers. Through this case, we should remember to obtain a thorough history including filler treatments in the case of parotid gland swelling. We also suggest proper utilization of advanced imaging such as MRI in evaluating the location of facial fillers.

• 대한기계학회논문집A
• /
• 제24권2호
• /
• pp.464-471
• /
• 2000

The fracture and wear behavior of dental composite resins containing prepolymerized particle fillers were investigated. Composite resins such as Metafil, Silux Plus, Heliomolar and Palfique Estelite were selected as specimens and contents of filler in specimens in order to evaluate the effect of prepolymerized particle fillers in fracture and wear characteristics. Ball on flat wear tester was used for the wear test at room temperature. The friction coefficient of Metafil was quite high relatively, and the wear resistances of Silux Plus and Palfique Estelite were better than those of Metafil and Heliomolar at the same experimental condition. It was found that the main wear mechanism was abrasive wear containing of plastic deformation of dental material.

• Archives of Plastic Surgery
• /
• 제42권2호
• /
• pp.232-239
• /
• 2015

A foreign body granuloma is a non-allergic chronic inflammatory reaction that is mainly composed of multinucleated giant cells. Foreign body granulomas may occur after the administration of any dermal filler. Factors such as the volume of the injection, impurities present in the fillers, and the physical properties of fillers affect granuloma formation. The formation of granulomas involves five phases: protein adsorption, macrophage adhesion, macrophage fusion, and crosstalk. The clinical and pathologic features of granulomas vary depending on the type of filler that causes them. Foreign body granulomas can be treated effectively with intralesional corticosteroid injections. Surgical excisions of granulomas tend to be incomplete because granulomas have ill-defined borders and moreover, surgical excisions may leave scars and deformities.

• Journal of Mechanical Science and Technology
• /
• 제15권6호
• /
• pp.727-734
• /
• 2001

The Tribological evaluation of commercial dental composite resins containing prepolymerized particle fillers was investigated. Composite resins such as Metafil, Silux Plus, Heliomolar, and Palfique Estelite were selected as specimens. In the wear tests, a ball-on-flat wear test method was used. The friction coefficient of Metafil was quite high. The wear resistance of Silux Plus and Palfique Estelite was better than that of Metafil and Heliomolar under the same experimental conditions. The main wear mechanism of the composite resins containing prepolymerized particle fillers was abrasive wear caused by the brittle fracture of the prepolymerized particles and the debonding of the filler and the matrix.