• Elastomers and Composites
• /
• 제48권3호
• /
• pp.181-189
• /
• 2013

비충전, 카본블랙 충전, 그리고 실리카 충전 천연고무(NR) 복합체를 원형 변형 상태로 $60-90^{\circ}C$에서 노화시켜 회복 거동을 조사하였다. 시험편은 공기와 물을 매일 교대로 교체하는 교매질 시스템 하에서 노화시켰다. 충전시스템에 따른 회복률의 순서는 비보강 > 실리카 보강 > 카본블랙 보강 순이었다. 공기에서 물로 교체하는 교매질 시스템에서 노화된 시험편의 회복률이 물에서 공기로 교체하는 교매질 시스템에서 노화된 시험편의 회복률보다 더 컸다. 최초 노화 매질은 변형 정도에 지배적으로 영향을 끼쳤다.

• Elastomers and Composites
• /
• 제23권4호
• /
• pp.299-307
• /
• 1988

The mono-, di- and polysulfidic concentrations of the carbon black filled NR and SBR vucanizates which have different cure systems were determined. The n-decane was used as a swelling solvent. The propane-2-thiol and hexane thiol were used as specific chemical probes to cleavage the chemical crosslinks such as di- and polysulfide. In order to understand the effect of crosslink structure on the physical properties of vulcanizates, the tensile properties, fatigue failure, heat build up, compression set and viscoelastic properties were measured. From the results, the significant relationships between crosslink sturctures and physical properties, especially a gins resistance were obtained. Therefore, the better performances of the product can be satisfied by using the interpretations and approaches in this study.

• Elastomers and Composites
• /
• 제27권4호
• /
• pp.281-288
• /
• 1992

The purpose for this study is to examine the vulcanization characteristics, especially the damping, elastic modulus and viscous modulus properties of filler 50phr filled NR compounds and to find out the compounds which can be used as damping materials in industry. For this study, compounds were prepared with filler filled compounding formula. Their vulcanization characteristics, elastic modulus, viscous modulus and damping properties were examined by mean of the rheometrics dynamic spectrometer. The results of this study can be summarized as follows. 1. The elastic modulus values of the maxium under the condition of 1Hz frequency, showed the order as follows, $HAF>Silica>FEF>GPF>SRF>Clay>CaCO_3\;coated>CaCO_3$. 2. The damping values of the maxium under the condition of 1Hz frequency, showed the order as follows $Silica>HAF>FEF>GPF>SRF>Clay>CaCO_3\;coated>CaCO_3$.

• Elastomers and Composites
• /
• 제47권2호
• /
• pp.156-161
• /
• 2012

공기와 증류수에서 노화시킨 천연고무 복합체의 원형 변형으로부터의 회복 거동의 차이를 연구하였다. 공기에서 노화시킨 시험편의 회복률이 증류수에서 노화시킨 것보다 더 컸다. 충진제로 보강한 시험편의 회복속도가 비충진 시험편보다 더 빨랐다. 카본블랙으로 보강한 시험편의 회복속도가 실리카로 보강한 시험편보다 더 빨랐다. 노화 매질에 따른 회복 거동의 차이는 가교밀도 변화와 아닐링 효과로 설명하였다.

• Bulletin of the Korean Chemical Society
• /
• 제27권9호
• /
• pp.1473-1476
• /
• 2006

• Elastomers and Composites
• /
• 제42권3호
• /
• pp.143-150
• /
• 2007

본 연구에서는 고무제품의 수치 안정성과 성능유지에 직접적으로 영향을 미치는 중요한 특성 중 하나인 온도변화에 따른 고무재료의 경도변화를 고찰하였다. 새롭게 제작된 Inter-national Rubber Hardness Degree(IRHD, Normal type) 경도측정 시험기를 사용하여 미충전된 NR과 SBR 시편의 여러 온도에서 경도변화를 측정하였으며 Young's modulus 값과 비교하였다. NR과 SBR 모두 유리전이온도 근처에서 경도와 Young's modulus의 급격한 변화를 보였다. 온도가 증가함에 따라 경도와 Young's modulus 값이 증가하는 경향을 보였으며 이는 분자의 운동성과 엔트로피 영향으로 해석할 수 있다. 카본블랙과 실리카가 충전된 NR과 SBR의 경우 충전제의 함량이 증가함에 따라 경도에 미치는 온도의 영향이 감소함을 관찰하였다.

• Elastomers and Composites
• /
• 제56권4호
• /
• pp.223-233
• /
• 2021

In this study, epoxidized liquid isoprene rubber (E-LqIR) was used as a processing aid in a silica-filled natural rubber compound to improve the fuel efficiency, abrasion resistance, and oil migration problems of truck and bus radial tire tread. The wear resistance, fuel efficiency, and extraction resistance of the compound were evaluated according to the molecular weight of E-LqIR. Results of the evaluation showed that the E-LqIR compound had a lower chemical crosslink density than that of a treated distillate aromatic extract (TDAE) oil compound because of the sulfur consumption of E-LqIR. However, the filler-rubber interaction improved because of the reaction of E-LqIR with silica and crosslink with the base rubber by sulfur. As the molecular weight of E-LqIR increased, crosslink with sulfur was facilitated, and the filler-rubber interaction improved, resulting in improved abrasion resistance. The fuel efficiency performance of the E-LqIR compound was poorer than that of the TDAE oil compound because of the low chemical crosslink density and hysteresis loss at the free chain end of E-LqIR. However, the fuel efficiency performance improved as the molecular weight of E-LqIR increased.

• 공업화학
• /
• 제22권2호
• /
• pp.144-148
• /
• 2011

본 연구에서는 화학적 구조가 다른 thiuram 계 촉진제인 TMTD (tetramethyl thiuram disulfide), thiazole 계 촉진제인 MBTS (2,2-dithiobis(benzothiazole)), sulfenamide 계 촉진제인 CBS (n-cyclohexyl benzothiazyl-2-sulfenamide)를 사용하여 각각의 촉진제가 실리카가 충전된 천연고무의 가황 특성에 미치는 영향을 비교 평가하였다. TMTD는 상대적으로 빠른 가류 속도와 높은 최대 토크값($T_{max}$), 우수한 기계적 물성을 보였고 MBTS는 상대적으로 중간 정도의 가황 시간과 낮은 $T_{max}$, 기계적 물성을 보였다. 마지막으로 CBS는 느린 가황 시간을 나타낸 반면 상대적으로 우수한 $T_{max}$와 기계적 물성을 나타냈다. 유사한 가황 특성 경향은 카본블랙이 충전된 천연고무 컴파운드에서도 찾아볼 수 있었다.

• Elastomers and Composites
• /
• 제22권4호
• /
• pp.293-304
• /
• 1987

The purpose of this study is to examine the effect of rubber-filler attachments on inorganic filler contained NR vulcanizatic. The results of this study showed as follows. The reinforcing properties and damping values of the vulcanizates in the elastic region showed strong relation with the filler characteristics and temperture. The vulcanizates filled with nature-activated inorganic filler like silica had higer elastic modulus and damping values than the vulcanizates of nature-nonactivated inorganic filter. The reinforcing effects of differential filler loadings on NR raised the effects with temperature rise, but the damping values varied with the filler characteristics and temperature variations.

• Macromolecular Research
• /
• 제9권2호
• /
• pp.92-99
• /
• 2001

Silica-filled rubber compounds have slower cure characteristics than carbon black-filled ones due to the adsorption of curatives on the silica surface. Fatty acid was used as a cure activator along with zinc oxide in a sulfur cure system. Poly(ethylene glycol), PEG, was used in silica-filled rubber compounds to prevent adsorption of the curatives on the silica surface. In this study, influence of the size of fatty acid and PEG on properties of silica-filled NR compounds was investigated. It was found that the size of fatty acid and PEG affected the curt: characteristics and physical properties. The cure rate becomes faster as the PEG size increases. By increasing the size of fatty acid or PEG, the delta torque of the compound decreases while the Mooney viscosity increases. The modulus of the vulcanizate decreases with increasing the molecular weight of fatty acid or PEG. The experimental results were explained by the filler dispersion and by the prevention of the curative-adsorption on the silica surface.