• 한국수산과학회지
• /
• 제28권2호
• /
• pp.145-156
• /
• 1995

Satellite infrared images were analyzed to study the distribution of eddies off the east coast of Korea from 1987 to 1991. Most of the eddies were filament-type and were generated near the fringe of the East Korea Warm Current (EKWC) flowing northward. Eddies having length of 20-40km and width of 10-20km were most abundant. The meso-scale eddies of 100-200km in diameter were found between Mukho and Wonsan Bay in almost all the images. There was no evidence for the consistent movement of eddies to a definite direction. The Ulleung Warm Eddy, although reported previously by the hydrographic data, could not be identified by the limited amount of infrared imagery.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.10-14
• /
• 2002

Structural behavior of high-pressure composite vessels of TYPE 3 (full-wrapped over a seamless aluminum liner) was studied through numerical simulations based on 3D nonlinear finite element method. Under high-pressure loading, a TYPE 3 composite vessel shows material nonlinearity due to elastic-plastic deformation of aluminum liner, and mismatch of deformation at the junction of cylinder and dome causes geometrical nonlinearity. Finite element modeling and analysis technique considering this nonlinearity was presented, and a pressure vessel of 6.8L of internal volume was analyzed. Design specification to satisfy requirements was determined based on analysis results.

• 한국진공학회지
• /
• 제17권5호
• /
• pp.419-425
• /
• 2008

10 mTorr의 이하의 저압조건에서는 비 충돌에 의한 anomalous skin effect 과정이 반드시 고려되어 한다는 것이 선행 연구 결과를 통해 학술적으로 입증된 바 있다. 그러나 단면적이 0인 필라멘트 타입의 전류 모델을 적용했기 때문에 안테나 중심에서 전기장이 무한대가 되는 비 물리적인 현상이 발생하게 되는 문제가 있다. 따라서 본 연구에서는 단면이 유한한 표면 전류 모델을 적용하여 안테나 영역에서의 전기장을 계산하였으며, 필라멘트 타입의 전류 모델을 적용했을 때와 여러 조건에서 비교하였다.

• 항공우주시스템공학회지
• /
• 제17권6호
• /
• pp.127-132
• /
• 2023

본 연구에서는 필라멘트 와인딩 공법을 적용한 Type 4 압력용기의 설계를 수행하였다. 수소저장용 탱크의 설계인 점을 고려하여 누설을 방지하기 위해 라이너는 고분자 고밀도 폴리에틸렌(HDPE)을 적용하였고 복합재 구조는 카본/에폭시를 Hoop 방향과 Helical 방향으로 적층하여 설계하였다. 이론적 접근으로 Helical 섬유의 각도와 Hoop, Helical 각각의 섬유 두께를 결정하여 설계하였다. 설계에 대한 안전성은 상용소프트웨어인 ANSYS를 활용하여 유한요소 해석으로 검증하였다.

• 식물분류학회지
• /
• 제38권4호
• /
• pp.433-458
• /
• 2008

한국산 꿩의다리속 식물에 대해 뿌리, 잎, 화서, 꽃, 수술, 암술, 열매 등 형태 형질의 종합적인 검토를 통하여 형질의 분류학적 가치를 논하고, 이에 따라 새로운 종 검색표를 작성하였다. 연구 결과, 특수화된 줄기 및 뿌리는 수근형, 괴경을 갖는 수근형, 괴근형, 팽미근형(tuberoid), 지하경, 지상경으로 구분되었다. 줄기는 능선의 유무 또는 털의 유무에 따라 구분되었으며, 잎은 일반적으로 2-3회 3출엽이며, 엽선, 엽저, 탁엽의 모양, 열편의 수로 구분되었다. 화서는 산방화서와 원추화서로 구분되고, 꽃은 양성화이다. 꽃잎이 없으며, 개화시 꽃받침이 있는 것과 없는 것으로 구분되고, 다양한 형태를 하고 있어 종을 동정하는데 중요한 형질로 나타났다. 특히 수술은 약의 모양과 정단모양, 약의 털, 수술대의 팽창정도, 수술대의 표피형태 등에 따라 구분되며, 암술은 주두의 모양, 자방의 선모유무, 심피자루의 길이 등에 따라 구분되었다. 열매는 수과의 형태를 가지며, 수과의 모양, 수과의 능선 또는 날개의 유무, 과병의 길이 등에 따라 구분되었다. 조사된 형질 중 절을 구별하는 데는 수술대의 확장정도, 약의 모양, 수과의 날개와 능선, 수과의 팽창 정도 등이 식별형질이 사용되었으며 종 동정을 하기 위한 유용한 형질은 뿌리, 잎의 모양, 수술과 암술의 모양, 수과의 부리 및 과병의 길이, 수과와 잎의 털 등으로 나타났다.

• 대한의생명과학회지
• /
• 제12권4호
• /
• pp.413-418
• /
• 2006

Charcot-Marie-Tooth disease (CMT) is blown as one of the inherited disorder of peripheral nervous system. Recently, it was found that point mutations in the neurofilament light subunit (NF-L) gene cause CMT. Neurofilaments (NFs) are heteropolymers consist of NF-L, NF-M and NF-H. To assess the relationship between CMT and NF-L mutation in cellular level, we performed phenotypic analysis of the mutant NF-L (E397K) using cultured cell lines. Vimentin-deficient human adrenal carcinoma SW13 (Vim-) cells have a potential to form the intermediate filaments when the cells are expressing both NF-L and NF-M. Our results show that co-expression of wild type NF-L with NF-M showed intermediate filament formation in SW13 (Vim-) cells, while E397K with NF-M did not. This result means that E397K mutant lost its ability to form the intermediate filament in vivo, and further suggests that the E397K mutation is closely related to CMT.

• Composites Research
• /
• 제16권2호
• /
• pp.1-8
• /
• 2003

본 논문에 한국항공우주연구원에서 개발 중인 KSR-III 로켓의 탑재부 축소형 킥모터 구조 설계와 제작공정 개발 내용을 정리하였다. 경량화를 위해 복합재료를 적용하였으며, 복합재 연소관 제작에 널리 사용되는 필라멘트 와인딩 방법을 도입하였다. 복합재 구조설계에는 망목이론(netting theory)과 적층판 이론을 사용하여 요구되는 내압하중에 적합한 와인딩 두께를 결정하였고, 돔형상은 와인딩 및 맨드렐(mandrel) 제작의 편이성을 고려하여 결정하였다. 재료는 경량화를 목표로 T-800 탄소 섬유와 고온용 수지로 선정하였다. 또한 와인딩 후 맨드렐를 제거하기 위해 조립식 맨드렐을 개발하여 적용하였다.

• 한국산업보건학회지
• /
• 제15권3호
• /
• pp.213-220
• /
• 2005

Penetration and health effect of fibers was related with their diameters and length. The purpose of this study is to characterize and compare the diameter and length of airborne man-made mineral fibers(MMMF) or synthetic vitreous fibers in the related industries. The average fiber length of the continuous filament glass, rock wool, refractory ceramic, and glass wool fibers production industries approximately 27, 28, 35, $50-105{\mu}m$. Airborne glass fibers were longest in all the type of MMMFs. The average diameters of airborne fibers generated from refractory ceramic, rock wool, glass wool, continuous filament glass fibers production industries were approximately 1.0, 1.6, 1.5-4 and $10{\mu}m$, respectively. The percentages of respirable fibers(<$3{\mu}m$) were 94% for RCFs, 73% for rock wool fibers, 61.0% for glass fibers, and 1.6% for filament glass fibers. The length of glass fibers were the longest in all types of fibers, and length of the others were similar. The refractory ceramic fibers were smallest in diameters and highest in fraction of respirable fibers.

• 한국기계가공학회지
• /
• 제21권5호
• /
• pp.1-8
• /
• 2022

Fused deposition modeling (FDM), based on stacking a continuous filament of polymer or composite materials, is well matured and is thus widely used in additive manufacturing technology. To advance FDM-based 3D printing technology, the mechanical properties of additively manufactured composite materials must be improved. In this study, we proposed a novel FDM 3D printing process using metal wire-polymer composites, enabling enhanced mechanical properties. In addition, we developed a new type FDM filament of copper wire wrapped in nylon material for stable 3D printing without thermal damage during the printing process. After FDM printing of the copper wire-nylon composite filament, we conducted a tensile test to investigate the mechanical behavior of the printed composite materials. The experimental results confirmed that the tensile strength of the 3D-printed metal wire-polymer composites was higher than that of the conventional single polymer material. Thus, we expect that the FDM printing process developed in this study may be promising for high-load-bearing applications.

• 천문학회보
• /
• 제46권1호
• /
• pp.47.2-47.2
• /
• 2021

Focusing on both small separations and baryonic acoustic oscillation scales, the cosmic evolution of the clustering properties of peak, void, wall, and filament-type critical points is measured using two-point correlation functions in ΛCDM dark matter simulations as a function of their relative rarity. A qualitative comparison to the corresponding theory for Gaussian random fields allows us to understand the following observed features: (i) the appearance of an exclusion zone at small separation, whose size depends both on rarity and signature (i.e. the number of negative eigenvalues) of the critical points involved; (ii) the amplification of the baryonic acoustic oscillation bump with rarity and its reversal for cross-correlations involving negatively biased critical points; (iii) the orientation-dependent small-separation divergence of the cross-correlations of peaks and filaments (respectively voids and walls) that reflects the relative loci of such points in the filament's (respectively wall's) eigenframe. The (cross-) correlations involving the most non-linear critical points (peaks, voids) display significant variation with redshift, while those involving less non-linear critical points seem mostly insensitive to redshift evolution, which should prove advantageous to model. The ratios of distances to the maxima of the peak-to-wall and peak-to-void over that of the peak-to-filament cross-correlation are ~2-√~2 and ~3-√~3WJ, respectively, which could be interpreted as the cosmic crystal being on average close to a cubic lattice. The insensitivity to redshift evolution suggests that the absolute and relative clustering of critical points could become a topologically robust alternative to standard clustering techniques when analysing upcoming surveys such as Euclid or Large Synoptic Survey Telescope (LSST).