• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.11a
• /
• pp.281-284
• /
• 2005

This paper deals with the parametric analysis of electric and magnetic fields generated by lightning discharges. The measuring system consisted of the plate-type electric field and loop-type magnetic field sensor, the voltage follower, the active integrator and LabVIEW software. The parameters of the electric and magnetic field waveforms produced by intracloud lightning strokes were presented.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.350-355
• /
• 1997

A new magnetic field measuring system with induced coil is reported. This system consists of air-cared coil that is forced by the ultrasonic transducer. Induction voltage of coil is proportional to the DC magnetic field and the driving frequency of ultrasonic transducer by the principle of Faraday's law. The experimental measuring system is setup, and the possibility of a new magnetic field sensors is confirmed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.539-539
• /
• 2005

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2002.11a
• /
• pp.383-388
• /
• 2002

The appropriateness or in appropriateness for the standard value and presentation problem after measuring the electromagnetic field occurring in an electrical railroad.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.12 no.3
• /
• pp.1997-2002
• /
• 1970

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.234-234
• /
• 2009

This paper illustrates the use of electric field computation to optimize the design of high voltage composite bushing. In the bushing, a high electric stress occurred between field shaper and central conductor by the closely space. Also coaxial cylindrical shield has a great height along the axis to control an electric field. Consequently, all the potentials are raised axially along the field shaper and electric stress is concentrated on a part of the surface of the FRP tube near the upper end of the field shaper. Maxwell 2D simulator based on the boundary element method was also introduced in order to verify the reliability of the polymer bushing. The optimized design uses internal elements for electric stress grading at critical parts of the bushing.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.5
• /
• pp.351-356
• /
• 2018

Commonly, a live-line alarm can be used to measure the electric field strength of a high-voltage system to calculate its current, but it is hard to detect the electric field of shielded cables or concealed structures, such as underground distribution cables. Current sensors can detect the magnetic field in a single core wire, but they cannot determine the magnetic field about a double-core wire because the currents flow in opposite directions. Therefore, it is very difficult to detect certain current problems, such as a fault current in an extension line comprised of a double line. In this paper, to ultimately develop a sensor that can detect the current regardless of line conditions, we used a simulation to determine the concentration of the magnetic field dependent on the distribution of the external magnetic field and the path of each line's core.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.50 no.3
• /
• pp.83-89
• /
• 2008

Estimations of paddy field area are important for agricultural water supply planning. Especially these estimations have to be excused by drainage basin. In this research, we developed a paddy field estimation model considering shift-share effects such as national growing, structural, local effects. National growing effects are estimated by adopting the result of KREI-ASMO model which predict farm land area in national level. Paddy field structural effects are estimated using statistical data about farmhouse numbers and cultivation areas. Local allocation effects are calculated by differences of estimations and real data. The results using data from 1998 to 2003 show that developed model estimates 2006 paddy field areas in each province in 5% error and is applicable to predict future change of paddy field.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.4
• /
• pp.590-594
• /
• 2012

ZnO nanowires were fabricated by hydrothermal synthesis technique for field emission device application. Al-doped zinc oxide (AZO) thin films were prepared as seed layer of catalyst for the ZnO nanowire synthesis, for which conductivity of the seed layer was tried to be improved for enhancing the field emission property of the ZnO nanowire. The AZO seed layer revealed specific resistivity of $ 7.466{\times}10^{-4}[{\Omega}{\cdot}cm]$ and carrier mobility of 18.6[$cm^2$/Vs]. Additionally, upper tip of the prepared ZnO nanowires was treated by hydrochloric acid (HCl) to form a nanocone shape of ZnO nanowire, which was aimed for enhanced focusing of electric field on that and resultingly to improve field emission property of the ZnO nanowires. The ZnO nanowire with nanocone shape revealed decreased threshold electric field and increased current density than those of the simple ZnO nanowires.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2015.07a
• /
• pp.497-498
• /
• 2015

영상을 취득한 후 다양한 응용프로그램으로 확장이 가능한 4 차원 light field 영상은 일반적인 2 차원 공간 (spatial) 영역과 추가적인 2 차원 각 (angular) 영역으로 구성된다. 그러나 이러한 4 차원 light field 영상을 2 차원 CMOS 센서로 취득하므로 이에 따른 해상도 제약이 존재한다. 본 논문에서는 이러한 4 차원 light field 영상이 가지는 해상도 제약 조건을 해결하기 위하여, 4 차원 light field 영상에 적합한 학습 기반 (learning-based) 초해상도 (superresolution) 알고리즘을 제안한다. 제안하는 알고리즘은 공간영역 해상도 그리고 각영역의 해상도를 각각 2 배 향상시킨다. 실험에 사용되는 영상은 상용 light field 카메라인 Lytro 에서 취득하며, 기존의 선형 보간 기법인 bicubic 기법과의 비교를 통해 제안하는 기법의 우수성을 검증한다.