• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1591-1593
• /
• 2008

The tubular field emission lamp (FEL) was developed using a wire type carbon-nano-structure emitter called CNX The luminous efficiency of the tubular FEL (diode type, diameter: ${\varphi}15.5mm$, length: 200mm) has already achieved around 45lm/W and we expect to achieve over 60lm/W within the year.

• 한국전기전자재료학회논문지
• /
• 제17권6호
• /
• pp.647-651
• /
• 2004

We fabricated the 1-inch diode type flat lamp using CNTs, which were grown directly on soda-lime glass substrate at 600 ∼ 650 $^{\circ}C$ by thermal chemical vapor deposition(CVD) of acetylene gas. Turn- on field was about 2.8 V/${\mu}{\textrm}{m}$. We observed that uniform and high brightness had been obtained. The brightness of CNT flat lamp was measured up to about 14 kcd/$m^2$ at 2000V in spacing of 500 ${\mu}{\textrm}{m}$. The results showed that the CNTs were very good emission source and suitable for application in the lamp.

• 전력전자학회논문지
• /
• 제14권1호
• /
• pp.31-37
• /
• 2009

본 논문에서는 전계방출 원리를 이용하여 이미터로서의 성능이 뛰어난 탄소나노튜브 (Carbon Nano Tube)를 이용한 전계방출 면광원용 안정기를 제안한다. 안정기는 고전압 직류전압 부분과 양극의 펄스를 생성하는 부분으로 구성되어 있다. 탄소나노튜브를 이용한 전계방출 램프는 3가지의 전극 (애노드, 게이트, 캐소드)으로 구성되어 있는데, 애노드와 게이트 사이에는 직류 고전압이 공급되고 게이트와 캐소드 사이에는 양극의 펄스가 공급된다. 램프 및 안정기를 보호하기 위하여 과전류, 과전압, 과온도에 대한 보호 기능을 추가하였고, 실험을 통하여 제안된 방식이 탄소나노튜브를 이용한 램프 구동을 위한 적합함을 검증하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 디스플레이 광소자 분야
• /
• pp.89-92
• /
• 2002

Carbon nano tubes(CNTs) have been reported as field emission source because has a sharp tip, a high aspect tip, high chemical stability, high mechanical strength and low work function properties. In this study, we fabricated successfully the back-lamp of the I-inch flat type using CNTs, which was grown directly on cathode substrate of sodalime glass at low temperature. The brightness of CNT back-lamp is measured to $14 Kcd/m^{2}$ at $2000V_{dc}$ in spacing of $500{\mu}m$. And, the emission properties of packaged CNT back-lamp was analyzed as function of applying voltage and times.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2006년도 제31회 학술논문발표회 초록집
• /
• pp.34-34
• /
• 2006

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.691-692
• /
• 2009

Screen printable CNT pastes were formulated including conductive nano particles (CNPs) and their properties were investigated with an expectation of stable cold cathodes for advanced lamp application. CNT cathodes showed a turn-on field of 1~1.5V/um, a life time of ~100 hours at an emission current density of 10uA/$cm^2$ for DC-bias. Detailed analysis of measured I-V was carried out by applying Fowler-Nordheim model to trace down the origin of emission property degradation.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1545-1546
• /
• 2007

Zinc gallate-based RGB phosphors and vertically aligned carbon nanotube emitters are prepared for flat field-emission lamp. The blend phosphors of blue $ZnGa_2O_4$, green $ZnGa_2O_4:Mn^{2+}$ and red $ZnGa_2O_4:Cr^{3+}$ are coated on the front glass, and the carbon nanotubes are chemically bonded on the rear ITO glass as a cathode.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.359-361
• /
• 2007

본 논문은 CNT(Carbon Nano Tube) FEL(Field Emission Lamp)에서 애노드(Anode)-캐소드(Cathode) 구동용 고전압 구동 회로 구현에 관한 것이다. 본 논문에서 제안하는 고전압 DC 전원 회로는 턴비가 높은 고전압 트랜스포머의 Leakage 인덕턴스를 이용하는 Series-Resonant 형태의 Full Bridge 컨버터를 적용하고 고전압 트랜스포머와 Voltage Multiplier를 이용한다. 고전압 트랜스의 절연전압을 줄이기 위해서 두개의 트랜스포머와 Voltage Multiplier를 이용하여 애노드 전극에는 Positive 고전압, 캐소드 전극에는 Negative 고전압을 인가한다. 이 경우 애노드와 캐소드 사이의 아크 방전 시에도 구동 IC 및 스위칭 소자를 보호할 수 있는 장점이 있다.

• 한국전기전자재료학회논문지
• /
• 제16권8호
• /
• pp.723-730
• /
• 2003

The CN(carbon nitrogen) nanofibers were formed by HIP(high isostatic pressure) process. From the field emission measurement, CN nanofibers shows an excellent characteristics of emitter, better than CNTs and carbon nanofibers. The structures obtained can be divided into three groups : bamboo-like fibers, corrugated structures and bead necklace-like fib res. Emission properties of CN nanofibers were investigated for spacing, between anode and cathode, variation. Turn-on fields was 1.4 v/$\mu\textrm{m}$. The time reliability and light emission test were carried out for about 100 hours. We suggest that CN nanofibers can be possibly applied to the high brightness flat lamp because of low turn-on field and time reliability

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.527-530
• /
• 2001

In this paper, the basic characteristics of flat fluorescent lamp using ultraviolet generate from gas discharge and powder type electrolyminescent display(P-ELD) using a phenomenon of the light emission eaused by the electrical field applied to phosphor are studied. The lamp is a simple structure with insulator layer, phosphor layer, and gas gap. Current(displacement current + discharge current) in flat fluorescent lamp using.