• KIEAE Journal
• /
• 제15권4호
• /
• pp.45-52
• /
• 2015

Purpose: Foam concrete is the concrete that contains large amount of air voids inside. In general, the density of foam concrete depends on parameters like water/binder ratio, foam volume, aggregate and pozzolan content, etc. Method: In this study, the effect of foam volume and fly ash content on dry density is investigated intensively in order to find the relationship between each parameter and their abilities to counteract with each other. According to the above information, though there are quite a number of studies on the effect micro fiber on foam concrete at low volume fractions, there is still lack of information especially on the high fiber content side. The objective of the second study is to investigate further on the use of micro fiber at higher volume fraction and fill in the lacking information. Beside from this study, the investigation of the effect of micro-fiber (polypropylene) to enhance the properties of foam concrete is also carried out. Result: Of the two variables that are investigated in this study, the foam volume and the fly ash content, show significant effect on the properties of foam concrete. The foam volume tends to decrease the density and strength of foam concrete. In the second part of our study, a large fibre volume fraction is proved to be able to evidently increase the flexural strength of foam concrete up to about 40% due to the effect of fibre bridging over the crack and a significant number of fibres that intercepts the crack surfaces. However, the compressive strength is found to decrease severely due to the occurrence of large pores as the result of fibre being added into concrete mixture.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권7호
• /
• pp.978-983
• /
• 2006

Forages from grazing lands comprise conventional feed resources for ruminants in the tropical region. A study was conducted to assess fodder productivity and nutritive potential of deferred forages of six silvopastoral traditional fodder banks in central northwest Tanzania, traditionally known as Ngitiri. The grazing lands were dominated by low quality increaser grass species: Eragrostis spp., Aristida spp., Urochloa spp., Rottboellia exaltata, Cenchrus spp., Cynodon spp. and Chloris spp., and forbs species. The grazing lands had low vegetative basal cover that varied (p<0.05) from 34.7 to 75%, and low forage biomass productivity that varied (p<0.05) from 0.76 to 3.69 tones (t) dry matter (DM)/ha. The forages contained low crude protein (CP) that varied (p<0.05) from 16 to 27 g/kg DM; and had high fibre contents, which varied (p<0.05) from 702-725, 497-573 and 119-225 g/kg DM for neutral detergent fibre (NDF), acid detergent fibre (ADF) and acid detergent lignin (ADL), respectively. The forages were poorly degraded in sacco, and showed low DM degradability (DMD) characteristics of 74, 473 and 576 g/kg DM for DM washing losses (a), slowly degradable feed fraction (b) and potential degradability, (a+b), respectively; and low DMD at 48 h incubation, which varied from 317-345 g/kg DM, and contained low metabolizable energy (ME), (4.2-4.36 MJ/kg DM). The herbage forages would not meet protein and energy requirements for maintenance and production, which could be reflected through low animal productivity. Further work is needed to assess animal productivity (growth, milk, draft force) from conserved forages in traditional fodder banks in the dry season.

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권12호
• /
• pp.1657-1662
• /
• 2004

The forage potential of mulberry (Morus alba) was evaluated under Malaysian conditions. The yield and nutrient composition of plant fractions of mulberry (whole plant, leaf and stem fractions) were determined at four harvest stages, namely, 3 (W3), 5 (W5), 7 (W7) and 9 (W9) weeks in a randomized block design. The study was conducted over a 9-month period to assess the persistence of the crop to repeated harvests. Fresh and dry matter (DM) yields of all plant fractions increased significantly (p<0.01) with increasing intervals between harvests, with highest DM yields at W9. The leaf to stem ratio declined significantly (p<0.01) from 5.2 (W3) to 0.9 (W9), indicating predominance of the stem fraction with advancing maturity. The nutritional composition of plant fractions was also significantly influenced (p<0.01) by advancing plant maturity at harvest. Crude protein (CP), ash and the metabolisable energy content of plant fractions declined significantly (p<0.01) from W3 to W9, while there was a corresponding significant increase (p<0.01) in the acid detergent fibre, neutral detergent fibre and acid detergent lignin. From this study it was concluded that the optimum stage to harvest the whole plant is 5 weeks, which is a compromise between yield, nutrient composition (CP and fibre components), and the annual number of cuts, with good crop persistence to repeated harvests. Fresh mulberry whole plant can provide a valuable supplemental source of nutrients to poor quality basal diets.

• Korean Membrane Journal
• /
• 제8권1호
• /
• pp.1-12
• /
• 2006

In semiconductor industries, dissolved oxygen is one of the most undesirable contaminants of ultrapure water. A method for dissolved oxygen removal (DOR) consists in the use of polymeric hollow fibres, loaded with a catalyst and fed with a reducing agent such as hydrogen. In this work, PVDF hollow fibres loaded with Pd were characterized by means of perporometry, scanning electron microscopy (SEM), energy dispersive X-ray (EDX). The hollow fibre analyzed shows a five-layer structure with remarkable morphological differences. An estimation of pore diameters and their distribution was performed giving a mean pore diameter of 100 nm. The permeance and selectivity of the fibres were measured using $H_2,\;N_2,\;O_2$ as single gases, at different operating conditions. An $H_2$ permeance of $37 mmol/m^2s$ was measured and $H_2/O_2$ and $H_2/N_2$ selectivities of ca. 3 were obtained. $H_2$ permeance was 1/3 when a water stream flows in the shell side. Catalytic fibrebehaviour was simulated using a mathematical model for a loop membrane reactor, considering only $O_2$ and $H_2$ diffusive transport inside the membrane and their catalytic reaction. Dimensionless parameters such as the Thiele modulus are employed to describe the system behaviour. The model agrees well with the experimental reaction data.

• Science of Emotion and Sensibility
• /
• 제10권4호
• /
• pp.623-629
• /
• 2007

Recently, the $"Optim"^{(R)}$ which is the wool fibre with high lustre developed by CSIRO in Australia is imported and commercialized as a high sensible fabrics for garment. But the price of this $"Optim"^{(R)}$ fibre is very high so material demand and supply is not smooth. This study is aiming to develop the drawing technology of the worsted yarn with washable function, lustre and low production cost. For this purpose, drawing yarns are made using developed drawing machine and high sensible fabrics are woven using this yarns, and various physical properties of the fabric specimen are measured and analysed with garment characteristics such as sewability and formability. The final objective of this study is seemed to be achieved by making the high sensible fabrics using drawing worsted yarns with high lustre such as $"Optim"^{(R)}$ fibre.

• Korean Journal of Food Science and Technology
• /
• 제8권4호
• /
• pp.207-211
• /
• 1976

Treated with various methods, body muscle of squid was cross section, stained by Van Gieson staining method, and observed microscopically to study on the state of thin layer of skin separated from meat. Results obtained were summarized as follows : 1. By general hot spring treatment were 1st. 2nd. and 3rd. layers of skin removed from squid muscle but 4th. not. 2. By boiling treatment was tissue of muscle fibre fissured largely toward the muscle fibre. 3. Sodium acetate treatment was superior to sodium nitrate, sodium sulfate and sodium tartrate treatment in the effect that the skin was separated from meat. Especially, concentrate solution of sodium acetate had the most excellent effect in the chemical reagent treatment. 4. By proteolytic enzyme treatment were 1st. 2nd. 3rd. and 4th. layers of skin removed all from squid muscle and the boundary fibre between skin and meat swelled in particular. 5. Two kinds of skin removing method, proteolytic enzyme treatment and sodium acetate treatment, were desirable to the actual processing.

• Computers and Concrete
• /
• 제13권6호
• /
• pp.709-737
• /
• 2014

Fibre-reinforced self-compacting concrete (FRSCC) is a high-performance building material that combines positive aspects of fresh properties of self-compacting concrete (SCC) with improved characteristics of hardened concrete as a result of fibre addition. To produce SCC, either the constituent materials or the corresponding mix proportions may notably differ from the conventional concrete (CC). These modifications besides enhance the concrete fresh properties affect the hardened properties of the concrete. Therefore, it is vital to investigate whether all the assumed hypotheses about CC are also valid for SCC structures. In the present paper, the experimental results of short-term flexural load tests on eight reinforced SCC and FRSCC specimens slabs are presented. For this purpose, four SCC mixes - two plain SCC, two steel, two polypropylene, and two hybrid FRSCC slab specimens - are considered in the test program. The tests are conducted to study the development of SCC and FRSCC flexural cracking under increasing short-term loads from first cracking through to flexural failure. The achieved experimental results give the SCC and FRSCC slabs bond shear stresses for short-term crack width calculation. Therefore, the adopted bond shear stress for each mix slab is presented in this study. Crack width, crack patterns, deflections at mid-span, steel strains and concrete surface strains at the steel levels were recorded at each load increment in the post-cracking range.

• Steel and Composite Structures
• /
• 제22권3호
• /
• pp.497-520
• /
• 2016

The confined concrete stress-strain curves utilised in computational models of concrete-filled steel tubular (CFST) columns can have a significant influence on the accuracy of the predicted behaviour. A generic model is proposed for predicting the stress-strain behaviour of confined concrete in short circular, elliptical and octagonal CFST columns subjected to axial compression. The finite element (FE) analysis is carried out to simulate the concrete confining pressure in short circular, elliptical and octagonal CFST columns. The concrete confining pressure relies on the geometric and material parameters of CFST columns. The post-peak behaviour of the concrete stress-strain curve is determined using independent existing experimental results. The strength reduction factor is derived for predicting the descending part of the confined concrete behaviour. The fibre element model is developed for the analysis of circular, elliptical and octagonal CFST short columns under axial loading. The FE model and fibre element model accounting for the proposed concrete confined model is verified by comparing the computed results with experimental results. The ultimate axial strengths and complete axial load-strain curves obtained from the FE model and fibre element model agree reasonably well with experimental results. Parametric studies have been carried out to examine the effects of important parameters on the compressive behaviour of short circular, elliptical and octagonal CFST columns. The design model proposed by Liang and Fragomeni (2009) for short circular, elliptical and octagonal CFST columns is validated by comparing the predicted results with experimental results.

• Steel and Composite Structures
• /
• 제32권3호
• /
• pp.361-372
• /
• 2019

Tubular joints are used in the construction of offshore structures and other land-based structures because of its ease of fabrication. These joints are subjected to different environmental loadings in their lifetime. At the time of fabrication or modification of an existing offshore platform, tubular joints are usually strengthened to withstand the environmental loads. Currently, various strengthening techniques such as ring stiffeners, gusset plates are employed to strengthen new and existing tubular joints. Due to some limitations with the present practices, some new techniques need to be addressed. Many researchers used Fibre Reinforced Polymer (FRP) to strengthen tubular joints. Some of the studies were focused on axial compression of Glass Fibre Reinforced Polymer (GFRP) strengthened tubular joints and found that it was an efficient technique. Earlier, the authors had performed studies on Carbon Fibre Reinforced Polymer (CFRP) strengthened tubular joint subjected to axial compression. The study steered to the conclusion that FRP composites is an alternative strengthening technique for tubular joints. In this work, the study was focused on axial compression of Y-joint and in plane and out of plane bending of T-joints. Experimental investigations were performed on these joints, fabricated from ASTM A106 Gr. B steel. Two sets of joints were fabricated for testing, one is a reference joint and the other is a joint strengthened with CFRP. After performing the set of experiments, test results were then compared with the numerical solution in ANSYS Parametric Design Language (APDL). It was observed that the joints strengthened with CFRP were having improved strength, lesser surface displacement and ovalization when compared to the reference joint.

• Asian-Australasian Journal of Animal Sciences
• /
• 제32권1호
• /
• pp.82-91
• /
• 2019

Objective: This experiment was conducted to compare the structure and composition of ruminal microorganisms in goats with high and low neutral detergent fibre (NDF) digestibility. Methods: Nineteen crossbred goats were used as experimental animals and fed the same total mixed rations during the 30-day pre-treatment and 6-day digestion trialperiods. All faeces were collected during the digestion period for measuring the NDF digestibility. Then, high and the low NDF digestibility individuals were chosen for the high NDF digestibility group (HFD) and low NDF digestibility group (LFD), respectively. Rumen contents were collected for total microbial DNA extraction. The V4 region of the bacterial 16S rRNA gene was amplified using universal primers of bacteria and sequenced using high-throughput sequencer. The sequences were mainly analysed by QIIME 1.8.0. Results: A total of 18,694 operational taxonomic units were obtained, within 81.98% belonged to bacteria, 6.64% belonged to archaea and 11.38% was unassigned microorganisms. Bacteroidetes, Firmicutes, and Proteobacteria were the predominant microbial phyla in both groups. At the genus level, the relative abundance of fifteen microorganisms were significantly higher (p<0.05) and six microorganisms were extremely significantly higher (p<0.01) in LFD than HFD. Overall, 176 core shared genera were identified in the two groups. The relative abundance of 2 phyla, 5 classes, 10 orders, 13 families and 15 genera had a negative correlation with NDF digestibility, but only the relative abundance of Pyramidobacter had a positive correlation with NDF digestibility. Conclusion: There were substantial differences in NDF digestibility among the individual goats, and the NDF digestibility had significant correlation with the relative abundance of some ruminal microorganisms.