Background: Literature is lacking on the effects of feeding by-product feed (BF)-based silage on rumen fermentation parameters, nutrient digestion and nitrogen (N) retention in sheep. Therefore, this study was conducted to determine the effect of replacing rye straw with BF-based silage as a roughage source on ruminal parameters, total-tract apparent nutrient digestibility, and N balance in sheep. Methods: The by-product feed silage was composed of spent mushroom substrate (SMS) (45 %), recycled poultry bedding (RPB) (21 %), rye straw (11 %), rice bran (10.8 %), corn taffy residue (10 %), protected fat (1.0 %), bentonite (0.6 %), and mixed microbial additive (0.6 %). Six sheep were assigned randomly to either the control (concentrate mix + rye straw) or a treatment diet (concentrate mix + BF-based silage). Results: Compared with the control diet, feeding a BF-based silage diet resulted in similar ruminal characteristics (pH, acetate, propionate, and butyrate concentrations, and acetate: propionate ratio), higher (p < 0.05) ruminal NH3-N, higher (p < 0.05) ether extract digestibility, similar crude protein digestibility, lower (p < 0.05) dry matter, fiber, and crude ash digestibilities, and higher (p < 0.05) N retention (g/d) Conclusion: The BF-based silage showed similar energy value, higher protein metabolism and utilization, and lower fiber digestion in sheep compared to the control diet containing rye straw.
Background: By-products of pickled radish (BPR) are considered food waste. Approximately 300 g/kg of the total mass of raw materials becomes BPR. Production of pickled radish has grown continuously and is presently about 40,000 metric tons annually in Korea. The objective of the present study was thus to explore the possibility of using BPR as a ruminant feed ingredient. Results: BPR contained a large amount of moisture (more than 800 g/kg) and ash, and comprised mostly sodium (103 g/kg DM) and chloride (142 g/kg DM). On a dry matter basis, the crude protein (CP) and ether extract (EE) levels in BPR were 75 g/kg and 7 g/kg, respectively. The total digestible nutrient (TDN) level was 527 g/kg and the major portion of digestible nutrients was carbohydrate; 88 % organic matter (OM) was carbohydrate and 65 % of total carbohydrate was soluble or degradable fiber. The coefficient of variation (CV) of nutrient contents among production batches ranged from 4.65 to 33.83 %. The smallest CV was observed in OM, and the largest, in EE. The variation in CP content was relatively small (10.11 %). The storage stability test revealed that storage of BPR at $20^{\circ}C$ (room temperature) might not cause spoilage for 4 d, and possibly longer. If BPR is refrigerated, spoilage can be deferred for 21 d and longer. The in vitro ruminal fermentation study showed that substitution of annual ryegrass straw with BPR improved ruminal fermentation, as evidenced by an increase in VFA concentration, DM degradability, and total gas production. Conclusion: The major portion of nutrients in BPR is soluble or degradable fiber that can be easily fermented in the rumen without adverse effects, to provide energy to ruminant animals. Although its high sodium chloride content needs to be considered when formulating a ration, BPR can be successfully used as a feed ingredient in a ruminant diet, particularly if it is one component of a total mixed ration.
Transactions of the Korean Society of Mechanical Engineers
/
v.14
no.1
/
pp.37-42
/
1990
Carbon fiber epoxy composite materials are widely used in the structures of aircrafts, robots and other machines because of their high specific stiffness, high specific strength and damping. In order for the composite materials to be used in the robot structure or machine element, bearing mounting and joining surfaces must be provided, which require accurate machining. In this paper, the machinability and tool wear characteristics of the milling operation of the carbon fiber epoxy composite materials were experimentally measured. The tool wear mechanism and the Taylor tool wear constants were determined. Also, the surface roughness of milling operation was measured w.r.t. cutting speed and feed.
Journal of the Korean Society of Manufacturing Technology Engineers
/
v.9
no.4
/
pp.34-47
/
2000
Since carbon fiber epoxy composite materials have excellent properties for structures due to their high specific strength, high specific modulus, high damping and low thermal expansion, the hollow shafts made of carbon fiber epoxy composites have been widely used for power transmission shafts for motor vehicles , spindles of machine tools, motor base, bearing mount for tool up and manufacturing. The molded composite machine elements are not usually accurate enough for mechanical machine elements, which require turning drilling , cutting and grinding. The experiment are surface grinding wheel GC60 to the carbon fiber epoxy composite specimen with respect to staking angle [0]nT , [45]nT, [90]nT on the CNC grinding machine. In this paper, the surface grinding characteristics of composite plate, which are surveyed experimentally and analytically with respect to the grinding force, surface roughness and wheel loading according to the variable depth of cut, wheel velocity and table feed rate are investigated.
Kim, Hyeong-Chul;Kim, Ki-Soo;Hahm, Seung-Duck;Kim, Hong-Bea;Namgung, Suk
Journal of the Korean Society for Precision Engineering
/
v.12
no.8
/
pp.27-38
/
1995
For solving troubles happened during the drilling process with carbon fiber epoxy composite materials(CFRP) by using HSS drill, a few types of diamond gift electroplated drills are manufactured, and machinability of these drills is experimented with a variety of cutting speed and feed rate. These drills have some advantages of good wear resistant and the conception of grinding process. As a result, using of these drills improves both troubles being caused by tool wear and damage of exit surface depending on fiber stacking angle. It is desirable that cutting conditions for the cutting thickness per revolution must be set under 0.01mm when the size of a diamond grit is # 60 .approx. 80.
A growth trial (Expt. 1) and an in vitro fermentation experiment (Expt. 2) were conducted to determine the response of growth performance, cecal fermentation characteristics and in vitro gas production to incremental levels of substitution of digestible fiber for lignified fiber in the diet of weaned rabbits. Three diets, formulated by substituting soyhulls (SH; used as digestible fiber source) for soybean straw (used as lignified fiber source) at substitution levels of 0, 25 and 50%, were used in a factorial design. In the growth trial (Expt. 1), increasing levels of SH substitution resulted in a quadratic increase in daily body weight gain rate (p<0.04) and feed conversion efficiency (p<0.02), but in a numerical decrease in dietary DM intake (p=0.15). When SH were included in the diet at 25% substitution level, rabbits had the highest rate of liveweight gain and feed conversion efficiency. As SH substitution level increased, pH values and ammonia-N of cecal contents linearly (p<0.001) decreased, but total VFA concentration linearly (p<0.03) increased. With incremental levels of SH substitution, the percentage of acetate and butyrate linearly (p<0.05) reduced, but the percentage of propionate and minor acids linearly (p<0.03) increased. Increasing the SH substitution levels tended to increase incidence of diarrhea. In the in vitro fermentation experiment (Expt. 2), regardless of origin of substrates fermented, increasing SH substitution level resulted in increased maximal gas production (p<0.001) and shortened gas production lag time, but had no effect on gas production rate (p>0.2). These observations suggest that incrementally feeding SH to rabbits could stimulate their cecal microbial activity, allowing cecal fermentation to shift towards favoring fiber digestion. In conclusion, digestible fiber from soyhulls may partially substitute for more lignified fiber, soybean straw, without having an adverse effect on cecal fermentative and microbial activity and growth performance. For growing rabbits, about 73% of total dietary NDF should be supplied by effective NDF, the remainder could come from digestible NDF, such as soyhulls.
The study was conducted to evaluate enzose (corn dextrose), a corn milling byproduct, as substitute for corn grain as energy in growing lambs. Five iso-caloric and iso-nitrogenous diets were formulated. The control diet (E0) had no enzose whereas enzose replaced 20, 40, 60 and 80% corn grain in E20, E40, E60 and E80 diets on the basis of energy supply, respectively. Fifty growing lambs were divided into 5 groups, 10 animals in each, in a randomized complete block design. Nutrients (dry matter, crude protein, neutral detergent fiber and acid detergent fibre) intake and digestibilities increased with gradual replacement of corn grain by enzose. Lambs fed E80 diet also retained higher nitrogen (N) than those fed E0 diet. Plasma glucose, $T_3$ and $T_4$ increased while urea N decreased in lambs receiving higher enzose content. Maximum weight gain was recorded in lambs fed diets containing maximum concentration of E as a replacement for corn grains. A better feed conversion ratio was recorded in lambs fed E80 compared with those fed E0 diet. The study suggests that enzose can be used as an economical feed ingredient to replace corn grain upto 80%, without any adverse effects on growth performance of growing lambs.
This experiment was conducted to investigate the effects of sowing date and cutting time on feed value of rye in paddy field at Yesan from Oct. 1990 to June 1991. The field experiment was sown 5 times at 10 day intervals from Oct. 5. The content of crude protein, digestible protein, total digestible nutrient(TDN), minerals(P, K, Ca, Mg), and energy(ENE, NEL, NEM, NEG) were decreased due to earlier sowing, while the content of acid detergent fiber (ADF) and neutral detergent fiber(NDF) increased. On the other hand, the yields per unit area for crude and digestible protein, TDN, minerals, and energy increased due to earlier sowing, but there was no significant difference among the plots sown on Oct. 5 through Oct. 25. The highest yield of crude protein was shown at late flowering stage, digestible protein and net energy gain (NEG) at heading stage and TDN at milk stage respectively.
This experiment was conducted to investigate the effects of nitrogen fertilizer level on forage yield and feed value, and to clarify the optimum nitrogen fertilizer level of rye in middle west area when cultured in paddy field. The field experiment treated 5 levels of nitrogen fertilization was carried out at Yesan from Oct. 1990 to June 1991. The fresh and dry weight increased with increased nitrogen fertilizer level by 30kg /10a, but dry matter ratio decreased. The ratio of leaf blade and leaf sheath in rye plant increased with increased nitrogen fertilizer level, but the ratio of stem and inflorescence decreased. The content and yield per unit area for protein, total digestible nutrient(TDN). Minerals, and energy increased with increased nitrogen fertilizer level, while acid detergent fiber(ADF) and neutral detergent fiber(NDF) decreased. The ratio of available protein among crude protein became higher with increased nitrogen fertilizer level. The optimum clipping time for net energy gain(NEG) and net energy maintenance(NEM) were 10 days earlier than milk stage for conventional items including TDN and proteins.
Journal of the Korean Society of Clothing and Textiles
/
v.17
no.3
/
pp.347-358
/
1993
Graft copolymerization of MMN4-VP onto cotton fiber using Ce(IV) salt as an initiator and triton X-100 as an emulsifier was performed under various polymerization conditions. In cograft polymerization, the polymeization behavior according to variation of 4-VP feed composition and the characteristics of MMA/4-VP graft polymer such as affinity for acid dye owing to cationization of cotton, antibacterial activity and thermal behavior were investigated. The results of this study were as follows : 1. While in copolymerization of MMA and 4-VP, 4-VP content in copolymer was more than that of monomer feed composition. 2. Increasing 4-VP content, graft yield was decreased, but graft efficiency was increased. In case of MMA/4-VP graft polymerization, the highest graft yield was obtained at higher CAN concentration than in MMA graft polymerization, the reason is that the behavior of 4-VP was disturbed by Ce(IV) sail 3. Elevation of temperature resulted in increase of graft yield and the apparent activation energy of MMA/4-VP graft polymerization was higher than that of MMA graft polymerization. 4. MMA/4-VP grafted cotton fiber showed affinity for acid dye, antibacterial activity and higher moisture regain than MMA grafted cotton fiber. MMA/4-VP grafted cotton fabric showed improvement of wrinkle recovery up to 40~50% graft yield and decreased thereafter. MMA/4-VP and MMA grafted cotton fabric did not showed significant difference in wrinkle recovery and stiffness.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.