• Computers and Concrete
• /
• 제25권6호
• /
• pp.509-516
• /
• 2020

Adding fibers improves concrete performance in respect of strength and plasticity. There are numerous fibers for use in concrete that have different mechanical properties, and their combination in concrete changes its behavior. So, to investigate the behavior of the fiber reinforced concrete, an in vitro study was conducted on concrete with different fiber compositions including different ratios of steel, polypropylene and glass fibers with the volume of 1%. Two forms of fibers including single-stranded and aggregated fibers have been used for testing, and the specimens were tested for compressive strength and dividable tensile strength (splitting tensile) to determine the optimal ratio of the composition of fibers in the concrete reinforced by hybrid fibers. The results show that the concrete with a composition of steel fibers has a better performance than other compounds. In addition, by adding glass and propylene fibers to the composition of steel fibers, the strength of the samples is reduced. Also, if using the combination of fibers is required, the use of a combination of glass fibers with steel fibers will provide a better compressive strength and tensile strength than the combination of steel fibers with propylene.

• Journal of Nutrition and Health
• /
• 제29권3호
• /
• pp.286-295
• /
• 1996

The present study was conducted to evaluate the usefulness of four kinds of seaweeds (mixture of purple laver & sea lettuce, sea tangle, sea mustard, agar agar) as a high- fiber supplment in the therapeutic deit for the diabetic patients. Seven groups of normal and streptozotocin-induced diabetic rats were fed dietary fiber-free control diet or one of experimental diets containing 7% of one of the four seaweeds for 6 weeks. The effect of seaweeds supplementation on the body weight change, gastrointestinal function, and the control of diabetic symptoms were examined and compared with the effect of fiber-free diet or pectin diet used as references. The body weight gains of all the diabetic groups were significantly suppressed compared to the normal group. Feed efficiency ratios and body weight gains of seaweed groups were relatively higher than those of the pectin group. Sea tangle appeared to have an effect of alleviating the typical diabetic symptoms such as polyphasia, polydipsia, polyuria, urinary glucose excretion and hyperglycemia indicating its beneficial acition of improving glucose metabolism even though the degree of effectiveness was less than that with pectin. All the supplemntations of seaweeds and pectin ressulted in the significant changes in gastronitestinal functins ; shortening of GI transit time, increase of fecal volume and the length of intestine. Based on their effects of the significant changes in GI function in may be suggested that seaweeds may influence the process of digestion and absorption of nutrients in diabetic animals.

• Structural Engineering and Mechanics
• /
• 제31권4호
• /
• pp.371-382
• /
• 2009

The concrete plates are most widely used structural elements in the hulls of floating concrete structures such as concrete barges and pontoons, bridge decks, basement floors and liquid storage tanks. The study on the behavior of high-strength fiber reinforced concrete (HSFRC) plates was carried out to evaluate the performance of plates under in-plane and transverse loads. The plates were tested in simply supported along all the four edges and subjected to in-plane and traverse loads. In this experimental program, twenty four 150 mm diameter cylinders and twelve plate elements of size $600{\times}600{\times}30$ mm were prepared and tested. Water-to-cementitious materials ratios of 0.3 and 0.4 with 10% and 15% silica fume replacements were used in the concrete mixes. The fiber volume fractions, $V_f$ = 0%, 1% and 1.5% with an aspect ratio of 80 were used in this study. The HSFRC mixes had the concrete compressive strengths in the range of 52.5 to 70 MPa, flexural strengths ranging from 6.21 to 11.08 MPa and static modulus of elasticity ranging from 29.68 to 36.79 GPa. In this study, the behavior of HSFRC plate elements subjected to combined uniaxial in-plane and transverse loads was investigated.

• Advances in concrete construction
• /
• 제10권3호
• /
• pp.195-209
• /
• 2020

This study investigates the behavior of ultra-high-performance fiber-reinforced concrete (UHPFRC) with hybrid macro-micro steel and macro steel-polypropylene (PP) fibers. Compression, direct and indirect tension tests were carried out on cubic and cylindrical, dogbone and prismatic specimens, respectively. Three types of macro steel fibers, i.e., round crimped (RC), crimped (C), and hooked (H) were combined with micro steel (MS) and PP fibers in overall ratios of 2% by volume. Additionally, numerical analyses were performed to validate the test results. Parameters studied included, fracture energy, tensile strength, compressive strength, flexural strength, and residual strength. Tests showed that replacing PP fibers with MS significantly improves all parameters particularly flexural strength (17.38 MPa compared to 37.71 MPa). Additionally, the adopted numerical approach successfully captured the flexural load-deflection response of experimental beams. Lastly, the proposed regression model for the flexural load-deflection curve compared very well with experimental results, as evidenced by its coefficient of correlation (R²) of over 0.90.

• Computers and Concrete
• /
• 제8권3호
• /
• pp.357-369
• /
• 2011

In this study, effect of steel fibers on toughness and some mechanical properties of concrete were investigated. Hooked-end steel fibers were used in concrete samples with three volume fractions (${\nu}_f$) of 0.5%, 0.75% and 1% and for two aspect ratios (l/d) of 45 and 65. Compressive and flexural tensile strength and modulus of elasticity of concrete were determined for cylindrical, cubic and prismatic samples at the age of 7 and 28 days. The stress-strain curves of standard cylindrical specimens were studied to determine the effect of steel fibers on toughness of steel-fiber-reinforced concrete (SFRC). In addition, the relationship between compressive strength and the flexural tensile strength of SFRC were reported. Finally, a simple model was proposed to generate the stress-strain curves for SFRC based on strains corresponding to the peak compressive strength and 60% of peak compressive stress. The proposed model was shown to provide results in good correlation with the experimental results.

• 한국농공학회논문집
• /
• 제55권3호
• /
• pp.25-33
• /
• 2013

In this study, the optimum mix proportions of rain garden structure concrete were decided and the mechanical properties were evaluated. Experimental parameters were blast furnace slag, hwang-toh, recycled aggregates and natural jute fibers. The target compressive strength and chloride ion penetration were more than 24 MPa and less than 1000 coulombs, respectively. The response surface method was used for statistical optimization of experimental results. The optimal mixing ratios of the blast furnace slag, hwang-toh, recycled coarse aggregate and jute fiber volume fraction were determined 59.98 %, 8.74 %, 12.12 % and 0.2 %, respectively. The compressive strength, flexural strength and chloride ion penetration test results of optimum mix ratio showed that the 24.56 MPa, 3.88 MPa and 999.08 columbs, respectively.

• 대한토목학회논문집
• /
• 제34권1호
• /
• pp.61-71
• /
• 2014

본 연구에서는 건설용 복합소재 구조에 적합한 미시-거시적 멀티 스케일 접근 방법을 제시하고 고차항 이론에 기반한 유한요소 진동 해석을 수행하였다. 본 연구에서 제시하는 멀티-스케일 접근 방법에 의한 유한요소 모델은 해석의 정확성 뿐 만 아니라 재료 조합의 영향을 정확히 보여준다는 점에서 장점을 갖는다. 적용된 유한요소 모델은 화이버의 함침비율의 변화에 따른 적층 판 구조의 고유진동을 상세 분석하기 위하여 개발되었다. 특히, 본 연구에서 제시한 결과는 적층 구조의 보강각도, 적층배열, 그리고 길이-두께비 등과 화이버 함침비율의 변화의 상호작용을 분석하는 데 초점을 두었다. 수치해석 결과로부터 화이버와 모재의 조합의 영향은 거시적 동적 특성을 조절할 수 있으므로 무시되면 안되며, 최적 배합을 통하여 건설용으로서 우수한 동적 구조성능을 만족하도록 설계할 수 있음을 보여준다.

• Advances in concrete construction
• /
• 제10권6호
• /
• pp.479-488
• /
• 2020

The experimental and numerical works were carried out on high performance fiber reinforced concrete (HPFRC) with w/cm ratios ranging from 0.25 to 0.40, fiber volume fraction (Vf)=0-1.5% and 10% silica fume replacement. Improvements in compressive and flexural strengths obtained for HPFRC are moderate and significant, respectively, Empirical equations developed for the compressive strength and flexural strength of HPFRC as a function of fiber volume fraction. A relation between flexural strength and compressive strength of HPFRC with R=0.78 was developed. Due to the complex mix proportions and non-linear relationship between the mix proportions and properties, models with reliable predictive capabilities are not developed and also research on HPFRC was empirical. In this paper due to the inadequacy of present method, a back propagation-neural network (BP-NN) was employed to estimate the 28-day compressive strength of HPFRC mixes. BP-NN model was built to implement the highly non-linear relationship between the mix proportions and their properties. This paper describes the data sets collected, training of ANNs and comparison of the experimental results obtained for various mixtures. On statistical analyses of collected data, a multiple linear regression (MLR) model with R2=0.78 was developed for the prediction of compressive strength of HPFRC mixes, and average absolute error (AAE) obtained is 6.5%. On validation of the data sets by NNs, the error range was within 2% of the actual values. ANN model has given the significant degree of accuracy and reliability compared to the MLR model. ANN approach can be effectively used to estimate the 28-day compressive strength of fibrous concrete mixes and is practical.

• 콘크리트학회논문집
• /
• 제27권3호
• /
• pp.215-227
• /
• 2015

본 연구에서는 순환골재를 사용한 강섬유보강 콘크리트보의 전단거동을 알아보기 위하여 순환골재 치환율은 30 %로 고정하고, 전단경간비(a/d = 2, 3, 4), 인장철근비(${\rho}=0.8$, 1.27 %) 및 강섬유 혼입율($V_f=0$, 0.5, 0.75, 1%)을 변수로 한 총 24개의 강섬유보강 콘크리트보를 만들어 실험하였다. 또한 순환골재를 사용한 강섬유보강 콘크리트보의 전단강도를 여러 연구자들의 제안식과 비교 분석하였다. 즉, 순환골재를 사용한 강섬유보강 콘크리트보의 전단거동에 따른 전단내력을 분석하고, 강섬유보강 전단강도 제안식과 실험값을 비교하여 순환골재를 사용한 강섬유보강 콘크리트보의 사용가능성을 평가하고자 하였다. 대부분의 실험값이 제안식에 의한 이론값보다 높게 나타나 순환골재를 사용한 강섬유보강 콘크리트보를 구조부재로 사용하여도 무방하다고 판단된다.

• International Journal of Concrete Structures and Materials
• /
• 제9권4호
• /
• pp.475-486
• /
• 2015

Mode II fracture toughness ($K_{IIc}$) of fiber reinforced concrete (FRC) has been widely investigated under various patterns of test specimen geometries. Most of these studies were focused on single type fiber reinforced concrete. There is a lack in such studies for hybrid fiber reinforced concrete. In the current study, an experimental investigation of evaluating mode II fracture toughness ($K_{IIc}$) of hybrid fiber embedded in high strength concrete matrix has been reported. Three different types of fibers; namely steel (S), glass (G), and polypropylene (PP) fibers were mixed together in four hybridization patterns (S/G), (S/PP), (G/PP), (S/G/PP) with constant cumulative volume fraction ($V_f$) of 1.5 %. The concrete matrix properties were kept the same for all hybrid FRC patterns. In an attempt to estimate a fairly accepted value of fracture toughness $K_{IIc}$, four testing geometries and loading types are employed in this investigation. Three different ratios of notch depth to specimen width (a/w) 0.3, 0.4, and 0.5 were implemented in this study. Mode II fracture toughness of concrete $K_{IIc}$ was found to decrease with the increment of a/w ratio for all concretes and test geometries. Mode II fracture toughness $K_{IIc}$ was sensitive to the hybridization patterns of fiber. The (S/PP) hybridization pattern showed higher values than all other patterns, while the (S/G/PP) showed insignificant enhancement on mode II fracture toughness ($K_{IIc}$). The four point shear test set up reflected the lowest values of mode II fracture toughness $K_{IIc}$ of concrete. The non damage defect concept proved that, double edge notch prism test setup is the most reliable test to measure pure mode II of concrete.