• 한국염색가공학회지
• /
• 제26권3호
• /
• pp.201-208
• /
• 2014

The high value-added functionality for synthetic fiber can be considered through a plasma enhanced treatment. In this study, PET(Polyethyleneterephthalate) was treated with a glow plasma and corona treatment. Surface characteristics of treated fabric were investigated using electron scanning microscopy(SEM), contact angle, X-ray photoelectron spectroscopy(XPS), tensile and adhesion strength. It was found that the contact angle showed $85.5^{\circ}$ for untreated fabric, $0^{\circ}$ for plasma and corona treatment at the condition of 200W for 7min. By XPS analysis, atomic ratio of O 1s/C 1s was increased from 0.27 to 0.43 by glow plasma and 0.27 to 0.41 by corona treatment at 200W for 7min, respectively. Glow plasma and corona treatment did not significantly change the tensile strength of PET fabric. Adhesion strength showed a substantial enhancement for the surface treated with the glow plasma, while corona treatment was adversely affected.

• 한국생산제조학회지
• /
• 제26권4호
• /
• pp.430-435
• /
• 2017

The effect of the surface profile on CFRP and aluminum metal bonding was studied. A small number of steps were made on the aluminum surface, and the shear stress and elongation were measured using a shear test after bonding with an autoclave method. As the number of surface steps increased, the shear stress and elongation increased. The surface bonding strength increased because of the effect of the mechanical and chemical bonding. When the number of effective stages was exceeded, the shear strength decreased again due to the aspect ratio of the step and the reduction of the penetration effect of the resin into the groove.

• Composites Research
• /
• 제25권3호
• /
• pp.76-81
• /
• 2012

대기압 플라즈마 처리를 통해 탄소나노튜브(CNT) 표면은 개질 되며 개질된 입자의 표면과 탄소섬유 강화 CNT 페놀 복합재료간에 계면접착력에 변화를 확인하였다. CNT 표면에 플라즈마 처리에 따라 표면 변화가 발생되고 표면 개질의 결과를 확인하기 위해 FT-IR을 사용하였다. 또한, 정적 접촉각 실험법을 통해 플라즈마 처리에 따른 CNT의 젖음성을 비교 평가하였다. 순수 CNT 입자의 접촉각은 $118^{\circ}$ 였으나, 플라즈마 처리를 할 경우 $60^{\circ}$도로 표면 개질을 통해 젖음성이 향상됨을 확인하였다. 탄소섬유와 CNT-페놀복합재료 간 계면접착력은 플라즈마 처리에 따라 겉보기 강성도가 증가되는 결과를 확인하였으며, 음향방출 실험법과 전기저항 측정법을 병행한 이중기지평가법을 통해 계면전단강도 (IFSS)를 계산하여 계면접착력 향상을 확인하였다.

• 한국의류학회지
• /
• 제32권7호
• /
• pp.1075-1081
• /
• 2008

Eco-friendly processing using enzymes has been focused in textile industry in order to reduce environmental pollutions. This paper was suggested to hydrolyze non-cellulose, such as fats and waxes in cotton fabrics by lipase treatment. Enzymatic treatment conditions were controlled according to pH, temperature, enzyme concentration, and treatment time. The physical properties of the lipase-treated cotton fabrics were evaluated by measuring weight loss, moisture regain and dyeing properties. The surface morphology of lipase-treated cotton fabrics were observed by SEM. As a result, the optimum conditions for the lipase treatment were at pH 4.2, temperature 50$^{\circ}C$, concentration 50%, and treatment time 90 minutes. Calcium chloride and Triton X-100 were effective auxiliaries in lipase treatment.

• 한국연초학회지
• /
• 제22권2호
• /
• pp.164-169
• /
• 2000

The reconstituted tobacco leaves(RTL) playa major part in the control of the low density and tar cigarette. Reconstituted tobacco manufactured by the papermaking process has much higher filling power than homogenized tobacco manufactured by slurry and rolling process. Fragile reconstituted tobaccos are liable to lead to small particles detrimental for filling power so they must be properly flexible. This work was conducted to determine the effect of CaCO$_3$ addition in paper-making process on the filling power and the flexibility of the reconstituted tobacco and to obtain the fundamental informations for improving the quality of domestic reconstituted tobacco. We analyzed the wood fiber species, the filler level, the fiber length, the fineness level and observed the surface of the RTL. From the obtained results, we could determine that foreign reconstituted tobacco was manufactured by blending softwood with hardwood and over 8% of calcium carbonate at the addition level. The domestic RTL has much higher fine fiber level by 23.2 % than that of foreign, so the refining treatment process and the condition must be reoptimized for the improvement of RTL quality.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1997년도 춘계학술발표회 논문집
• /
• pp.26-31
• /
• 1997

유리섬유/nylon 6 복합재료의 계면결합강도를 증가시키기 위하여 r-APS(r-Aminopropyltriethoxysilane)로 유리섬유의 표면을 처리 하였다. 이때 표면처리의 최적 조건을 찾기위해서 처리후 기기분석과 계면결합강도 측정 등을 하였다. 농도, pH, 처리시간, 온도를 변화시키면서 표면처리를 한 후 흡착량을 살펴본 결과 처리 농도에 의해서는 흡착량이 단조증가하였으며 처리시간에 따라서는 5분정도에서, 처리온도에 의해서는 30C 부근에서 최대 흡착량을 보였다. 또한 pH에 따른 흡착량은 silane의 고유 pH인 10.5부근에서 최대치를 나타냈다. FR-IR 분석에 의하면 NH2의 NH3 bending mode가 1607cm-1, 1575cm-1에서 나타났으며 SiOH의 SiO band는 960cm-1에서 나타났다. XPS를 통해서는 N ls와 Si 2p의 존재를 확인할 수 있었다. 표면처리된 유리섬유와 matrix인 nylon 6를 이용해 단섬유내장시편을 만들어 fragmentation test를 한 결과 계면결합강도는 약 5분의 처리시간과 1%(wt%)의 농도에서 최대값을 보였다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 춘계학술대회 논문집
• /
• pp.21-24
• /
• 2008

Properties of carbon nano fiber (CNF) as field emitters were described. Carbon nano fiber (CNF) of herringbone was prepared by thermal chemical vapor deposition(CVD). Field emitters mixed with organic binders, conductive materials and were prepared by screen-printing process. In order to increase field emissions, the surface treatment of rubbing & peel-off was applied to the printed CNF emitters on cathode electrode. The measurements of field emission properties were carried out by using a diode structure inline vacuum chamber. CNF of herringbone type showed good emission properties that a turn on field was as low as 2.1 $V/{\mu}m$ and current density was as large as 0.15 $mA/cm^2$ of 4.2 $V/{\mu}m$ with electric field. Through the results. we propose that CNFs are suitable for application of electron emitters in Field Emission Devices.

• Membrane and Water Treatment
• /
• 제10권4호
• /
• pp.251-257
• /
• 2019

Fabricating hydrophobic porous membrane is important for exploring the applications of membrane distillation (MD). In the present paper, poly(vinylidene fluoride) (PVDF) hollow fiber membrane was modified by coating polydimethylsiloxane (PDMS) on its surface. The effects of PDMS concentration, cross-linking temperature and cross-linking time on the performance of the composite membranes in a vacuum membrane distillation (VMD) process were investigated. It was found that the hydrophobicity and the VMD performance of the PVDF hollow fiber membrane were obviously improved by coating PDMS. The optimal PDMS concentration, cross-linking temperature and cross-linking time were 0.5 wt%, $80^{\circ}C$, and 9 hr, respectively.

• Carbon letters
• /
• 제6권4호
• /
• pp.243-247
• /
• 2005

Plasma polymerization of allylamine subsequently after plasma pre-treatment was conducted on the activated carbon fibers (ACFs) for the immobilization of amine groups in the surface of ACFs. The change of structural properties of ACFs with respect to different polymerization conditions was investigated through BET method. The change of surface morphologies of ACFs with respect to different plasma polymerization power was also studied through AFM. It was found that the structural properties such as specific surface area and micropore volume could be optimized under certain plasma deposition conditions. It was reckoned that treatment and deposition showed adverse effect on plasma polymerization, in which the former developed the micro-structures of the ACFs and the latter tended to block the micro pores. The Fourier transform infrared spectroscopy (FTIR) revealed that the poly(allylamine) was successfully immobilized on the surface of ACFs and the amount of the deposited polymer layer was related to the plasma polymerization power. SEM results showed that the plasma deposited polymer layer were small and homogenously distributed. The size and the distribution of particles deposited were closely related to the plasma polymerization power, too.

• 대한소아치과학회지
• /
• 제39권1호
• /
• pp.58-65
• /
• 2012

치관-치근 파절은 법랑질, 상아질, 백악질이 모두 포함된 치아의 파절로, 파절선이 대부분 절단연이나 순측의 변연부 치은에서 구개측 치은열구 하방으로 사선으로 진행된다. 파절선의 위치가 치은 연상이라면 파절편의 제거 및 치은연상 수복을 시행하고, 치은 연하라면 파절면의 외과적 노출술, 교정적 정출술, 외과적 정출술을 이용한 치아의 수복이 이루어진다. 그 외에 섬유 강화형 포스트를 삽입하여 치관 수복물의 유지력을 높이고, 레진 접착 시스템을 사용하여 치관 파절편을 재부착함으로써 생물학적으로 최소한으로 침습적인 치료를 하는 방법도 있다. 만약 파절의 정도가 치은 연하로 깊은 경우 발치나 치관절제술을 이용한 치근의 유지 등을 고려할 수 있다. 본 증례는 치관-치근파절로 내원한 12세 환아로 섬유강화형 포스트를 사용하여 치관 파절편 재부착을 시행하였으며 양호한 경과를 보여 이를 보고하는 바이다.