• Journal of Sensor Science and Technology
• /
• v.6 no.1
• /
• pp.35-42
• /
• 1997

The optical biosensor using the electrically controlled release of reactive reagent is developed for the detection of peroxide. Rapid degradation of polymer complex of PEOx and PMAA occurs as the applied current increases and thus released amount of HPA increases. The degradation velocity of polymer and the amount of HPA released are linearly proportional to the applied current. Peroxide is reacted with the released reagent by peroxidase and then the product, a fluorescent dimer DBDA, is formed. The monochromic light from light source (150W Xe arc ramp) excites the DBDA and the excited light is transmitted through an optical fiber to be detected by a photodiode array. The change of fluorescence intensity is related to the change of peroxide concentration. The peroxidase is entrapped in Ca-alginate get on the inner surface. The biosensor has the linear signal range of 0.025mM-10.mM peroxide. By applying the step function of peroxide, reproducibility of biosensor has been investigated. The mathematical model is constructed by the combination of enzyme kinetics with reactor flow model. Good agreement is obtained between the experimental result and model prediction in the sensor signal.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.5
• /
• pp.652-658
• /
• 2016

Twenty $Pelibuey{\times}Katahdin$ ewes ($35{\pm}2.3kg$) were used to determine the effects of the consumption of standardized plant extract containing a mixture of quaternary benzophenanthridine alkaloids and protopine alkaloids (QBA+PA) on growth performance, dietary energetics, visceral mass, and ruminal epithelial health in heat-stressed ewes fed with a high-energy corn-based diet. The basal diet (13.9% crude protein and 2.09 Mcal of net energy [NE] of maintenance/kg of dry matter) contained 49.7% starch and 15.3% neutral detergent fiber. Source of QBA+PA was Sangrovit RS (SANG) which contains 3 g of quaternary benzophenathridine and protopine alkaloids per kg of product. Treatments consisted of a daily consumption of 0 or 0.5 g SANG/ewe. Ewes were grouped by weight and assigned to 10 pens (5 pens/treatment), with two ewes per pen. The experimental period lasted 70 days. The mean temperature humidity index during the course of this experiment was $81.7{\pm}1.0$ (severe heat stress). There were no treatment effects on water intake. Dry matter intake was not affected (p = 0.70) by treatments, but the group fed SANG had a numerically (11.2%) higher gain in comparison to the control group, SANG improved gain efficiency (8.3%, p = 0.04), dietary NE (5.2%, p<0.01) and the observed-to-expected NE (5.9%, p<0.01). Supplemental SANG did not affect ($p{\geq}0.12$) carcass characteristics, chemical composition of shoulder, and organ weights (g/kg empty body weight) of stomach complex, intestines, and heart/lung. Supplemental SANG decreased liver weight (10.3%, p = 0.02) and increased visceral fat (16.9%, p = 0.02). Rumen epithelium of ewes fed SANG had lower scores for cellular dropsical degeneration (2.08 vs 2.34, p = 0.02), parakeratosis (1.30 vs 1.82, p = 0.03) and neutrophil infiltration (2.08 vs 2.86, p = 0.05) than controls. It is concluded that SANG supplementation helped ameliorate the negative effects of severe heat on growth performance of feedlot ewes fed high-energy corn-based diets. Improvement in energetic efficiency may have been mediated, in part, by anti-inflammatory effects of supplemental SANG and corresponding enhancement of nutrient uptake.

• Journal of the Korean Society of Food Culture
• /
• v.35 no.4
• /
• pp.333-341
• /
• 2020

This study evaluated the perception, consumption behavior, and optional attributes of Korean, Chinese, and U.S. consumers of energy bar products. Data were compared and analyzed by surveying 300 consumers in each country. Significant differences were observed in preference for energy bars according to their nationality, in the order China, the U.S., and Korea. Perception of taste, types and dietary suitability of the products ranked lower for Korean consumers, as compared to consumers of the United States and China. The order dietary fiber, protein, and calcium were the sought-after nutritional requirements of the products. The demand for protein was significantly higher in the U.S. Calcium demand was low in the United States and China, but was very high in Korea, which could be attributed to the low calcium intake of Koreans. Other optional attributes which were closely associated with the purchase and re-purchase decision, included price, taste and delivery period. All three factors were recognized as important options in Korea, whereas awareness of packaging/appearance and brand was not. The taste, nutrients and price in the U.S. ranked high as important optional attributes, while the packaging, external and expiration dates were recognized as low. Unlike Korea and the U.S., important optional attributes for Chinese consumers were determined in the order expiration date, taste, and nutrients, and showed low perception for packaging, appearance, weight, counts, and prices. Evaluating the preference for the main and secondary ingredients, Koreans preferred nuts over grains, Americans preferred dried fruits over nuts, and Chinese preferred nuts and grains; both Korean and American consumers had low preference for dried vegetables. The preference for chocolate was low in Korea and China, whereas preference for jelly was high in China as compared to Korea and the U.S. The intention of purchasing energy bars was significantly lower in Korea than in the U.S. and China. A variety of nutritious functional bars have recently been distributed and sold in Korea, but they are mostly produced in the U.S., which is the largest producer and consumer worldwide. Taken together, results of this study indicate that the demand for nutritional enhancement and preferred materials vary according to the nationality. Hence, it is necessary to develop products that reflect these criteria. Further research is required to analyze the relationship between preference and consumption behavior for each material product developed in the future.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.12
• /
• pp.1915-1926
• /
• 2008

Although we know that images of a country or an industry are influential factors in product evaluation, there has been little discussion about the channels through which consumers form a country or an industry image. Guided by the assumption that the image of the Korean fashion industry conveyed through U.S. media will likely affect the evaluation of Korean fashion products, we decided to examine articles published between January 1998 and June 2008 in Woman's Wear Daily(WWD), a prestigious U.S. daily trade newspaper covering all aspects of the national and international fashion business. By using the "Korean", we found 329 relevant articles. Through content analysis, we identified the aspects of the Korean fashion industry that have been considered salient to U.S. fashion media professionals. We set up categories based on the contents of the articles that discussed segments of the supply chain of the fashion industry. We found more comments on the Korean fashion industry as fiber and fabrics supplier or apparel manufacturer than in any other categories, which reflects that South Korea has been traditionally one of the most attractive sourcing countries for the U.S. fashion business. We identified significantly less coverage on the designing, branding, marketing, and retailing aspects of the Korean fashion industry. Due to economic boom in Korea, the country's fashion industry is recognized as having a highly fashion-conscious market that can afford the world's premium brands. However, the industry is viewed as being rather vulnerable to changes in the macro economic environment.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1182-1182
• /
• 2001

In this study, the newly constructed optical measurement system, which was mainly composed of a parametric tunable laser and a near infrared photoelectric multiplier, was introduced to clarify the optical characteristics of wood as discontinuous body with anisotropic cellular structure from the viewpoint of the time-of-flight near infrared spectroscopy (TOF-NIRS). The combined effects of the cellular structure of wood sample, the wavelength of the laser beam λ, and the detection position of transmitted light on the time resolved profiles were investigated in detail. The variation of the attenuance of peak maxima At, the time delay of peak maxima Δt and the variation of full width at half maximum Δw were strongly dependent on the feature of cellular structure of a sample and the wavelength of the laser beam. The substantial optical path length became about 30 to 35 times as long as sample thickness except the absorption band of water. Δt ${\times}$ Δw representing the light scattering condition increased exponentially with the sample thickness or the distance between the irradiation point and the end of sample. Around the λ=900-950 nm, there may be considerable light scattering in the lumen of tracheid, which is multiple specular reflection and easy to propagate along the length of wood fiber. Such tendency was remarkable for soft wood with the aggregate of thin layers of cell walls. When we apply TOF-NIRS to the cellular structural materials like wood, it is very important to give attention to the difference in the light scattering within cell wall and the multiple specular-like reflections between cell walls. We tried to express the characteristics of the time resolved profile on the basis of the optical parameters for light propagation determined by the previous studies, which were absorption coefficient K and scattering coefficient S from Kubelka-Munk theory and n from nth power cosine model of radiant intensity. The wavelength dependency of the product of K/S and n, which expressed the light-absorbing and -scattering condition and the degree of anisotropy, respectively, was similar to that of the time delay of peak maxima Δt. The variation of the time resolved profile is governed by the combination of these parameters. So, we can easily find the set of parameters for light propagation synthetically from Δt.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.3104-3104
• /
• 2001

The research described here was undertaken with the aim of monitoring, optimizing and ultimately controlling the production of heterofermentative microbes used as starters in the salami industry. The use of starter cultures in the fermented meats industry is a well-established technique used to shorten and standardize the ripening process, and to improve and control the organoleptic quality of the final product. Starter cultures are obtained by the submerged cultivation of suitable microorganisms in stirred, and sometimes aerated, fermenters where monitoring of key physiological parameters such as the concentration of biomass, substrates and metabolites suffers from the general lack of real-time measurement techniques applicable to aseptic processes. In this respect, the results of the present work are relevant to all submerged fermentation processes. Previous work on the application of on-line NIR spectroscopy to the lactic acid fermentation (Dosi et al. - Monreal NIR1995) had successfully used a system based on a measuring cell included in a circulation loop external to the fermenter. The fluid handling and sterility problems inherent in an external circulation system prompted us to explore the use of an in-line system where the NIR probe is immersed in the culture and is thus exposed to the hydrodynamic conditions of the stirred and aerated fluid. Aeration was expected to be a potential source of problems in view of the possible interference of air bubbles with the measurement device. The experimental set-up was based on an in-situ sterilizable NIR probe connected to the instrument by means of an optical fiber bundle. Preliminary work was carried out to identify and control potential interferences with the measurement, in particular the varying hydrodynamic conditions prevailing at the probe tip. We were successful in defining the operating conditions of the fermenter and the geometrical parameters of the probe (flow path, positioning, etc.) were the NIR readings were reliable and reproducible. The system thus defined was then used to construct and validate calibration curves for tile concentration of biomass, carbon source and major metabolites of two different microorganisms used as salami starters. Real-time measurement of such parameters coupled with the direct interfacing of the NIR instrument with the PC-based measurement and control system of the fermenter enabled the development of automated strategies for the interactive optimization of the starter production process.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.1
• /
• pp.132-139
• /
• 2004

This study was peformed in order to compare general components, color, free amino acid, fatty acid and organic acid contents between commercial doenjang (C-1, C-2, C-3) and green tea doenjang (GT). The moisture content in green tea doenjang was higher than that in commercial doenjang, but the contents of crude protein, carbohydrate and energy in commercial doenjang were higher than those in green tea doenjang. The crude lipid and fiber contents of commercial doenjang were similar to green tea doenjang. Catechin content of green tea doenjang was 2.3%. The total content of free amino acids in commercial doenjang ranged from 2,739∼6,380 mg% in which it showed wide variation among samples and the total content of free amino acids in green tea doenjang was 3000 mg%. Glutamic acid was almost high in commercial doenjang except one product but green tea doenjang was low. Linoleic acid (51%) was the highest content among the fatty acids. The major organic acid in both commercial and green tea doenjang was oxalic acid and its content in commercial times higher than in green tea doenjang. The antioxidant activity of green tea doenjang was higher than that of commercial doenjang.

• Culinary science and hospitality research
• /
• v.21 no.2
• /
• pp.119-129
• /
• 2015

In this study, rice bran containing biologically active substances, including oryzanol and dietary fiber, Korean food industry was used in glutinous rice Takju(a cloudy Korean rice wine) fermentation. During fermented in rice wine, four different amounts of defatted rice bran(0, 3, 6, and 10g) were formulated in a recipe and fermentation characteristics, physicochemical properties, and sensory characteristics of product were analyzed. An increase in the amount of defatted rice bran was witnessed by heightened pH values in the fermentation period. The titratable acidity of sansung takju was increased with high levels of defatted rice bran. The titratable acidity of defatted rice bran takju during the fermentation period significantly was decreased, and then increased. FRAP radical-scavenging activity of TDT6 2.56 g/moL, compare with the control group, showed the highest reducing power. The results of the sensory evaluation showed that overall-acceptability had the highest scores in the sansung takju containing TDT3(3%) level of defatted rice bran. In conclusion, sansung takju added with TDT3(3%) of defatted rice bran is rated most prefrence in the four groups in this parts quality and acceptability.

• Food Science and Preservation
• /
• v.12 no.2
• /
• pp.135-140
• /
• 2005

This study was performed to develop yut(Korean Traditional Candy), products using dried-persimmon, with the ratio of 5, 10, 15, 20 and $25\%$, and the quality characteristics were investigated. The proximate compositions of dried-persimmon were $29.67\%$ moisture, $1.76\%$ crude protein, $0.18\%$ crude lipids, $1.31\%$ crude ash and $3.92\%$ crude fiber, respectively. Brix of yut products were ranged from $81.5\%$ to $83.0\%$. With increasing the amount of dried-persimmon, hunter's color values of Land b were reduced. In the texture property, the addition of dried-persimmon increased hardness, fracturability, gumminess and chewiness, while decreased adhesiveness. Judging from texture, taste and overall acceptability of the yut product, the recommended substitution level of dried-persimmons was $10\%$. In consumer sensory score, the $twenties\~sixties$ gave high score of color, while the $thirties\~fifties$ gave high score of sweetness. Overall acceptance of yut products of $dried-persimmon$ were good in old-age consumers.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.8
• /
• pp.1143-1150
• /
• 2003

This study was conducted to investigate in vitro methane production of feed ingredients and relationship between the content of crude nutrients and methane production. Feed ingredients (total 26) were grouped as grains (5 ingredients), brans and hulls (8), oil seed meals (9) roughages (3), and animal by-product (1) from their nutrient composition and their methane production protential were measured by in vitro gas test. Among the groups, the in vitro methane productions for both 6 and 24 h incubation were highest in grains, followed by brans and hulls, oil meals and roughages, animal byproducts. Within the group of grains, methane production from wheat flour was the highest, followed by wheat, corn, tapioca, and then oat. Within the brans and hulls, soybean hull showed the highest methane production and cotton seed hull, the lowest. Methane production from oil meals was lower compared with grains and brans and hulls, and in decreasing order production from canola meal was followed by soybean meal, coconut meal, and corn germ meal (p<0.01). Three ingredients were selected and the interactions among feed ingredients were evaluated for methane production. Correlation coefficient between measured and estimated values of the combinations were 0.91. Methane production from each feed ingredient was decreased with increasing amount of crude fiber (CF), protein (CP) and ether extract (EE), whereas positive relationship was noted with the concentrations of N-free extract (NFE). The multiple regression equation (n=134) for methane production and nutrient concentrations was as follows. Methane production (ml/0.2 g DM)=(0.032${\times}$CP)-(0.057${\times}$EE)-(0.012${\times}$CF)+(0.124${\times}$NFE) (p<0.01; $R^2$=0.929). Positive relationship was noted for CP and NFE and negative relationship for CF and EE. It seems possible to predict methane production potential from nutritional composition of the ingredients for their effective application on formulating less methane emitting rations.