• 한국유통학회지:유통연구
• /
• 제2권2호
• /
• pp.107-134
• /
• 1997

The purpose of this study was to identify perception level of QR and the usage level of QR technologes and to examine the relationships between the firm characteristics and the usage level of QR technologes and QR adoption in domestic fashon industry. Using the usage levels of QR technologes and QR adoption as the dependent variables, the selected firm characteristics, as independent variables, were firm size, perception level of QR benefits, and product characteristics. The findings from the empirical analysis of this study can be summarized as follows : Firm size and perception level of QR benefits were significantly associated with the usage level of QR technologies and adoption. Product characteristics were partly associated with QR adoption. The four elements were partly associated with QR adoption. Most of the QR adopters were using the QR technologies, and will tend to have four elements. From the results of this study, the researcher expects the information from this study to contributes to the body of knowlege about the identification, adoption and utilization of component technologies for QR management systems and draws several counterproposal as follows : The advancement of domestic fashion industry is possible through the systematic adoption of QR by the collaboration of the government & the industry. Most nonadopter had financial problems as a constraint to QR adoption. Financial supports are needed from trade associations and government. The fashion industry may promote the type of smart QR. The type of smart QR means usage level of QR technologies which reflect the firm characteristics and the actual industry state in domestic fashion industry. The fashion industry may establish information technology network (i. e., EDI, POS, EOS) between relative industry such as fiber, apparel manufacturers, retailers. The related industry should make a partnership.

• 한국의류학회지
• /
• 제42권3호
• /
• pp.486-502
• /
• 2018

Mass-production caused by industrialization has led to environmental pollution; however, a potential solution to this problem is the Up-cycling fashion design belonging to the sustainable design category. This study analyzed the material characteristics of each brand fashion product by selecting 21 domestic Up-cycling fashion brands. The product types manufactured by domestic Up-cycling fashion brands could be divided into fashion clothing, bag, and fashion accessories. The materials used for each item included special material, waste fiber, waste leather, waste paper, and others. In the results of analyzing the material characteristics into the external characteristics and internal characteristics, the external characteristics included the durability with less abrasiveness and deformation as well as a mixture with other different materials, while the internal characteristics included a story arousing consumers' empathy, and scarcity without the same design due to the limitation of material.

• Design & Manufacturing
• /
• 제11권2호
• /
• pp.15-19
• /
• 2017

Carbon fiber reinforced plastic (CFRP) is applied as structural material. CFRP is excellent in plane strength / stiffness and don't haves rust. Lightweight, rigid and robust at the same time as transportation material. Aluminum alloy and reinforcement material The application is increasing rapidly. In this study, the prototype of a semi - Monocoque structure frame, Longeron, Stringer, Skin of the aircraft, restraining the rigidity Clips of the aircraft was designated as the target product and the experiment was conducted. ln the experiment, (1) For CFRTP 3 points, data on heating, transfer, and cooling were measured using Thermo Couple, and optimum temperature required for flexible state was obtained. Heating was performed at a temperature 15% higher than the provided temperature. (2) By using a pneumatic press during molding, by dividing LH, center and RH according to the cooling time, thickness parameter of the target product due to the load is measured, and thickness control and time-deviations were analyzed and cross sections were observed with a low magnification microscope.

• Korea-Australia Rheology Journal
• /
• 제15권2호
• /
• pp.91-96
• /
• 2003

The sensitivity of the product to the ongoing sinusoidal disturbances of the process has been investigated in the film casting of viscoelastic polymer fluids using frequency response analysis. As demonstrated for fiber spinning process (Jung et al., 2002; Devereux and Denn, 1994), this frequency response analysis is useful for examining the process sensitivity and the stability of extensional deformation processes including film casting. The results of the present study reveal that the amplification ratios or gains of the process/product variables such as the cross-sectional area at the take-up to disturbances exhibit resonant peaks along the frequency regime as expected for the systems having hyperbolic characteristics with spilt boundary conditions (Friedly, 1972). The effects on the sensitivity results of two important parameters of film casting, i.e., the fluid viscoelasticity and the aspect ratio of the casting equipment have been scrutinized. It turns out that depending on the extension thinning or thickening nature of the fluid, increasing viscoelasticity results in enlargement or reduction of the sensitivity, respectively. As regards the aspect ratio, it has been found that an optimum value exists making the system least sensitive. The present study also confirms that the frequency response method produces results that corroborate well those by other methods like linear stability Analysis and transient solutions response. (Iyengar and Co, 1996; Silagy et al., 1996; Lee and Hyun, 2001).

• 펄프종이기술
• /
• 제42권5호
• /
• pp.47-53
• /
• 2010

It is important to utilize the citrus sludge in terms of the reuse of waste materials in the manufacture of corrugated medium. Especially, the mandarin industry occupies the first place in Jeju province. In this paper, the application of citrus sludge mixed with KOCC recycled fibers into the manufacture of corrugated medium was studied. The citrus sludge was acidic in pH value. Also, the constituents of citrus sludge contain some short fibers, fines, and mucus which contain flavonoids, pectins and so on. In papermaking application, these components cause some troubles like foams, bad smell, fouling on the paper machine, and bad drainage and web breaks of wet web. The strength properties of handsheets prepared from KOCC and citrus sludge was decreased, compare to handsheets made of only KOCC. To compensate the problems on strength properties, some kinds of additives were tried to apply into papermaking wet-end system in laboratory scale. As a result, mixing conditions of alum, starch and anionic additives showed the best options in the recovery of strength properties and formations of corrugated medium.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2019년도 추계학술대회
• /
• pp.102-102
• /
• 2019

Soybean curd residue (SCR), known as a major waste product of soybean processing, is the water-insoluble fraction which is removed by filtration during soymilk production. For these reasons, SCR was usually considered as food waste. SCR might have a good potential as a functional food material, value-added processing and utilization. SCR contains high-quality protein and consists of a good source of nutrients, including protein, oil, dietary fiber, minerals, along with un-specified monosaccharides and oligosaccharides. Also, SCR might be a potential source of low cost protein for human consumption. However, SCR could be a source of bacterial contamination when during food processing. This study was aimed to investigate antibacterial capacity of natural product through detecting relationship between SCR and microbial. We isolated five bacterial strains from SCR and elucidated antibacterial activity of nature medicines to extend storage capacity of food made with SCR. Thus, the extract which showed antibacterial effects in Corynebacterium calloonae and Raoultella amithinolytica is a combination of seven kinds of extracts: Glycyrrhiza uralensis, Cudrania tricuspidata, Salvia miltiorrhiza Bunge, blueberry, Acorus gramineus, Ginkgo biloba L., Camellia sinensis. This study suggested that antibacterial activities of natural medicines could be used for extension of storage capacity in SCR-contained food.

• 한국의류산업학회지
• /
• 제23권5호
• /
• pp.598-610
• /
• 2021

Korean textile and fashion companies have played a major role not only in developing the Korean economy since Korea's industrialization started in the early 1960s but also in providing opportunities to form and expand chaebols (conglomerates of family-owned businesses). This study reviewed and analyzed the historical development of chaebols, which started the fiber/textile/fashion business before the 1960s and maintained their chaebol status until 2010. The Samsung, Samyang, Kolon, Taekwang, Hyosung, LG, and SK groups were included in the study, and data were collected from diverse sources, including the publications and websites of the chaebol companies, newspapers, magazines, and research articles. The strategies of the companies at the corporate and group levels were examined based on the corporate lifecycle, which consists of existence, growth, maturity, rebirth, and decline stages. The results showed that all the analyzed companies actively engaged in product line expansion during the growth stage. Vertical integration, especially backward integration, was common during the growth stage. Some groups established new companies to manage additional product lines and integration, while others pursued growth strategies mainly at the corporate level. The rebirth stage occurred in only a few companies and groups. Some seemed to be going through the decline stage, and the rest of the groups exited the textile and fashion business.

• Journal of the Korean Wood Science and Technology
• /
• 제47권2호
• /
• pp.239-248
• /
• 2019

This research presents an improvement of the physical and mechanical properties of composite board (com-ply) made of Oriented Strand Board (OSB) coated with wood veneer of Pine (Pinus merkusii), Avocado (Persea Americana) and Mahogany (Swietenia mahogany). 1.5 mm thick veneers of those three wood types were adhered to the surface of OSB using two adhesive types: epoxy and isocyanate. The adhesive with the glue spread of $250g\;m^{-2}$ applied using single glue line was spread and then cold pressed with the pressure of $15kg\;cm^{-2}$ for 3 hours. The research result showed an improving dimension stability of com-ply, but not found on all parameters of physical property test. The moisture content seemed to be influenced by the com-ply type, yet not related to its thickness swelling, water absorption and linear expansion. The exception took place in the parallel linear expansion when immersed for 2 hours. The highest to the lowest increases of MOE and MOR were consecutively found on OSB coated with wood veneer of Pine, Mahogany and Avocado. However, the increases were statistically insignificant. The highest increasing screw hold power was found at the com-ply type AE (avocado veneer and epoxy adhesive) that was by 28%.

• Composites Research
• /
• 제31권6호
• /
• pp.404-411
• /
• 2018

복합재료는 주어진 경화 사이클(cure cycle)로 오토클레이브 공정이 진행됨에 따라 수지의 화학수축, 열팽창계수 등에 의한 제품 내 잔류응력(residual stress)이 발생한다. 이로 인해 spring-in, warpage와 같은 열 변형이 발생하고 최종 제품의 수치 정확성이 감소한다. 구조물의 정밀한 제작이 요구되는 항공우주분야에서는 열변형으로 인한 문제를 해결하는 것이 중요하다. 따라서 복합재료의 경화과정을 예측하고 이해하기 위한 연구가 활발히 이루어지고 있다. 본 연구에서는 공정과정에 따른 복합재료의 경화메커니즘을 유한요소해석을 통해 예측하였고, 공정에 의해 발생하는 열변형에 대한 화학수축의 영향을 열팽창계수와 비교하여 분석하였다.

• Design & Manufacturing
• /
• 제17권2호
• /
• pp.62-69
• /
• 2023

In this study, we conducted a study on the optimization of injection molding conditions to minimize deformation of plastic product. The charging management system housing of the vehicle was selected as the research subject. Melting temperature, cooling temperature, packing time, and packing pressure were selected as the main factors expected to affect the deformation of molded products. Each main factor was divided into 5 levels. Optimization of injection molding conditions to minimize deformation was performed using the Taguchi Method. We performed an analysis of variance (ANOVA) to identify significant factors affecting the deformation of plastic product. In order to select injection molding conditions that minimize deformation of plastic products, injection molding analysis was additionally performed for insignificant factors. We then compared the deformation of the molded part before and after optimization. As a result of comparing the injection analysis results of the basic conditions and the injection analysis results of the optimal conditions, it was confirmed that the amount of deformation after optimization was improved by about 10.9%.