• Composites Research
• /
• v.30 no.2
• /
• pp.84-93
• /
• 2017

This study investigates thermal and mechanical characterization of environmental barrier coating on the $SiC_f-SiC$ composites. The spherical environmental barrier coating (EBC) powders are prepared using a spray drying process for flowing easily during coating process. The powders consisting of mullite and 12 wt% of Ytterbium silicate are air plasma sprayed on the Si bondcoat on the LSI SiC fiber reinforced SiC composite substrate for protecting the composites from oxidation and water vapor reaction. We vary the process parameter of spray distance during air plasma spray of powders, 100, 120 and 140 mm. After that, we performed the thermal durability tests by thermal annealing test at $1100^{\circ}C$ for 100hr and thermal shock test from $1200^{\circ}C$ for 3000 cycles. As a result, the interface delamination of EBC never occur during thermal durability tests while stable cracks are prominent on the coating layer. The crack density and crack length depend on the spray distance during coating. The post indentation test indicates thermal tests influence on the indentation load-displacement mechanical behavior.

• Korean Journal of Agricultural Science
• /
• v.44 no.4
• /
• pp.558-565
• /
• 2017

This study was conducted to determine the effect of inoculation of microorganism isolated from pig feces on nutrient contents of fermented hulless barley. The microbial flora in feces of a total of four crossbred piglets ($Landrace{\times}Yorkshire{\times}Duroc$) was analyzed by 16s rRNA sequencing. The most abundant strain was then selected for fermentation of hulless barley. Lactobacillus plantarum (L. plantarum) was dominant (64.56%) in intestinal microbial flora in the pig feces. The selected candidate strain showed significantly higher survival rate at pH 7 than at pH 2.5 and 3.0 (p < 0.05). Incubated culture containing the candidate strain showed an increased growth rate with lower pH levels after 7.5 h incubation compared to initial incubation period (p < 0.05). When compared with commercial multiple probiotics which were used as control, the selected strain showed faster growth rate at 5 h post-incubation (p < 0.05). During the fermentation period, neither inoculated nor non-inoculated control hulless barley showed any change in pH value. Crude fat, fiber and ash contents were lower (p < 0.05) in hulless barley inoculated by the selected strain compared to control. However, moisture, energy, NDF and ADF were not affected by the inoculation of strain or fermentation period. Lactic acid was increased and acetic acid was decreased in the hulless barley inoculated with the selected strain during the fermentation period (p < 0.05). Taken together, our results suggest that L. plantarum derived from the pigs could be utilized as a new microorganism for manufacturing fermented feed stuffs.

• Journal of Periodontal and Implant Science
• /
• v.40 no.1
• /
• pp.3-10
• /
• 2010

Purpose: Periodontal regenerative therapies for defects created by severe periodontitis are mainly focused on bone regeneration. Although cementum regeneration needs to be better understood, it is believed to play an important role in periodontal regeneration. The first step toward a full understanding of cementum regeneration is to compare repaired cementum to pristine cementum. This study, which used histological techniques, was designed to focus on cementum regeneration and to compare pristine cementum to repaired cementum after surgical procedures with 8 and 24 week healing periods in a canine model. Methods: Buccal and lingual mucoperiosteal flaps of 10 beagle dogs were surgically reflected to create critical-sized defects. Intrabony one-wall defects, of which dimension is 4 mm width and 5 mm depth, were made at the distal aspect of mandibular second premolars and the mesial aspect of mandibular fourth premolars in the right and left jaw quadrants. Animals were sacrificed after 8 and 24 weeks post-surgery for histological specimen preparation and histometric analysis. Results: The repaired cementum was composed mostly of acellular cementum and cellular mixed fiber cementum and was thicker in the apical area than in the coronal area. The acellular cementum of the supracrestal area appeared to be amorphous. The newly formed cellular cementum was partially detached from the underlying circumpulpal dentin, which implied a weak attachment between new cementum and dentin, and this split was observed to a lesser extent in the 24 week group than in the 8 week group. The vertical height of the repaired cementum was greater in the 24 week group than in the 8 week group. Conclusions: Within the limitations of this study, we can conclude that repaired cementum after root planing was mainly acellular cementum and cementum tissue that matured to a shape similar to pristine cementum as the healing progressed from 8 to 24 weeks.

• Journal of the Korea Concrete Institute
• /
• v.18 no.5 s.95
• /
• pp.603-610
• /
• 2006

The external unbonded strengthening offers advantages in speed and simplicity of installation over other strengthening techniques. Unlike externally bonded steel plate or carbon fiber sheet, surface preparation of the concrete for installation of high-tension bar is not required and installation is not affected by environmental conditions. Anchoring pin or anchoring plate are installed at the end of beam to connect the high-tension bar to concrete beam. The deviator are used in order that supplementary external bars would follow the curvature of the tested beam. A set often laboratory tests on reinforced concrete beam strengthened using the technique are reported. The main test parameters are the section area of strengthening bar, the depth of deviator and the number of deviators. The paper provides a general description of structural behavior of beams strengthened using the technique. The test result of strengthened beam are compared with those from a reference specimen. It is shown that the reinforcing technique can provide greater strength enhancements to unstrengthened beam and that the provision of deviator enhances efficiency. The ultimate moment of specimen with two deviators was higher than that of specimens with one deviator. It is also shown that the external bars enhance strength of beams in shear.

• Development and Reproduction
• /
• v.10 no.2
• /
• pp.93-96
• /
• 2006

The total length, head length, head height, eye diameter, retina thickness, and lens diameter of the dotted gizzard shad, Konosirus punctatus, showed positive allometric relationships between hatching and 30 days post-hatching (dph). The increase in total length relative to head length and head height, head length growth relative to eye and lens diameter, head height growth relative to eye diameter and lens diameter, and thickness of the retina relative to eye diameter, lens diameter, head length, and head height were showed allometric relationships. The eyes were formed completely at 9 dph. At this age, the eye has a lens, an optic nerve fiber layer, a ganglion cell layer, an inner plexiform layer, an inner nuclear layer, an outer plexiform layer, an outer nuclear layer, an outer limiting membrane, a rod and cone layer, and an epithelial layer. The essential demands that must be met by the retina in this species pertain to light sensitivity and spatial resolution.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.6
• /
• pp.827-830
• /
• 2013

To evaluate the effects of feeding four different levels of starter in male Holstein dairy calves, a completely randomized study was conducted, using 28 calves with initial body weight of $40.5{\pm}2.4$ kg. The animals were fed iso-nitrogenous starter and were weaned when they consumed 350, 500, 650 and 800 g/d of starter for 3 d consecutively. Starter and water were available ad-libitum throughout the experiment. Body weight at pre-weaning (less than 5 wk) and post-weaning (8 wk) was lower in calves that received 350 g/d of starter than in the other treatments (p<0.05). Feed conversion ratio (FCR) was the highest among all treatments in pre-weaning period (p<0.05). Dry matter intake (DMI) at weaning and total DMI was higher in that calves received 800 g/d of starter compared with other treatments (p<0.05). Calves fed 350 and 500 g/d of starter were weaned earlier (p<0.05) and showed lower milk consumption (kg, DM) compared with other treatments whereas no significant difference was observed between calves fed 350 and 500 g/d of starter (p>0.05). Dry matter, organic matter and crude protein digestibilities were lower in calves that received 350 g/d of starter compared with other treatments (p<0.05). No differences were observed in acid detergent and neutral detergent fiber digestibility among all treatments (p>0.05).Treatments had no significant effect on time of starting rumination, respiratory score, and days of drug administration for pneumonia. There were no meaningful differences in feces, fecal odor scores, body temperature, and days of drug administration for diarrhea among all treatments (p>0.05). Total dry matter intake at the end of experiment showed no significant difference among calves fed 600 and 800 g/d of starter, but calves fed 350 and 500 g/d of starter showed more dry matter (DM) intake than calves in the 600 and 800 g/d groups (p<0.05).

• Journal of the Korea Concrete Institute
• /
• v.22 no.1
• /
• pp.19-27
• /
• 2010

Aging and severe environments are major causes of damage in reinforced concrete (RC) structures such as buildings and bridges. Deterioration such as concrete cracks, corrosion of steel, and deformation of structural members can significantly degrade the structural performance and safety. Therefore, effective and easy-to-use methods are desired for repairing and strengthening such concrete structures. Various methods for strengthening and rehabilitation of RC structures have been developed in the past several decades. Recently, FRP composite materials have emerged as a cost-effective alternative to the conventional materials for repairing, strengthening, and retrofitting deteriorating/deficient concrete structures, by externally bonding FRP laminates to concrete structural members. The main purpose of this study is to investigate the effectiveness of adaptive neuro-fuzzy inference system (ANFIS) in predicting behavior of circular type concrete column retrofitted with FRP. To construct training and testing dataset, experiment results for the specimens which have different retrofit profile are used. Retrofit ratio, strength of existing concrete, thickness, number of layer, stiffness, ultimate strength of fiber and size of specimens are selected as input parameters to predict strength, strain, and stiffness of post-yielding modulus. These proposed ANFIS models show reliable increased accuracy in predicting constitutive properties of concrete retrofitted by FRP, compared to the constitutive models suggested by other researchers.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.15 no.4
• /
• pp.281-301
• /
• 1993

It was revealed that the morphology and projection pattern of terminal arbors from single primary afferent are different among distinct fiber types, functional types and the different subdivision of trigeminal sensory nucleus complex(TSNC). But it was not identified the ultrastructural morphology and synaptic connections of terminal arbors from each primary afferent within TSNC. So we employed the intra-axonal horseradish peroxidase(HRP) injection technique to define the terminal arbors of primary afferent fiber from slowly adapting mechanoreceptors in the periodontal ligament of the cat, and examined 66 labeled terminal arbors within the rostrodorsomedial part(Vo.r) of the trigeminal nucleus oralis, electromicroscopically with 90nm serial sections. All the boutons labelled with HRP contained clear, spherical and uniform sized synaptic vesicles(diameter : $47.66{\pm}3.58nm$ ). Most of the labelled boutons were boutons en passant type and they were connected by unmyelinated axonal strand. In which neurofilament and microtubule was not developed but occasionally contained synaptic vesicle in contrast to the myelinated axon. The size of the labelled bouton was relatively small(long diameter : $1.46{\pm}0.24{\mu}m$, short diameter $0.85{\pm}0.26{\mu}m$, average diameter $1.15{\pm}0.24{\mu}m$) and the shape of which varied from dome to elongated shape, but scalloped glomerulus shape was not developed. Each primary ending in Vo.r made synapse with one or two neuronal propiles(average : $1.11{\pm}0.31$), of which, 89.4% of labelled boutons made synapse with only one neuronal pro pile, the remainder, 10.6% of labelled boutons, made synapse with two neuronal propile. So characteristically they made very simple synapse. Most of labelled boutons(80.03%) made asymmetrical synapse only with dendritic shaft or spine, and 6.1% of labelled boutons received symmetrical synapse from pleomorphic vesicle containing axonal ending(p-ending). So presynaptic inhibiton was relatively scarce. Synaptic triad, in which a p-ending is presynaptic both pre-and post-synaptic element of the axo-dendritic contact from the labelled primary ending was not observed.

• Fiber Technology and Industry
• /
• v.2 no.4
• /
• pp.490-508
• /
• 1998

One of the latest fields of research in the area of output devices is tactual display devices [13,31]. These tactual or haptic devices allow the user to receive haptic feedback output from a variety of sources. This allows the user to actually feel virtual objects and manipulate them by touch. This is an emerging technology and will be instrumental in enhancing the realism of wearable augmented environments for certain applications. Tactual displays have previously been used for scientific visualization in virtual environments by chemists and engineers to improve perception and understanding of force fields and of world models populated with the impenetrable. In addition to tactual displays, the use of wearable audio displays that allow sound to be spatialized are being developed. With wearable computers, designers will soon be able to pair spatialized sound to virtual representations of objects when appropriate to make the wearable computer experience even more realistic to the user. Furthermore, as the number and complexity of wearable computing applications continues to grow, there will be increasing needs for systems that are faster, lighter, and have higher resolution displays. Better networking technology will also need to be developed to allow all users of wearable computers to have high bandwidth connections for real time information gathering and collaboration. In addition to the technology advances that make users need to wear computers in everyday life, there is also the desire to have users want to wear their computers. In order to do this, wearable computing needs to be unobtrusive and socially acceptable. By making wearables smaller and lighter, or actually embedding them in clothing, users can conceal them easily and wear them comfortably. The military is currently working on the development of the Personal Information Carrier (PIC) or digital dog tag. The PIC is a small electronic storage device containing medical information about the wearer. While old military dog tags contained only 5 lines of information, the digital tags may contain volumes of multi-media information including medical history, X-rays, and cardiograms. Using hand held devices in the field, medics would be able to call this information up in real time for better treatment. A fully functional transmittable device is still years off, but this technology once developed in the military, could be adapted tp civilian users and provide ant information, medical or otherwise, in a portable, not obstructive, and fashionable way. Another future device that could increase safety and well being of its users is the nose on-a-chip developed by the Oak Ridge National Lab in Tennessee. This tiny digital silicon chip about the size of a dime, is capable of 'smelling' natural gas leaks in stoves, heaters, and other appliances. It can also detect dangerous levels of carbon monoxide. This device can also be configured to notify the fire department when a leak is detected. This nose chip should be commercially available within 2 years, and is inexpensive, requires low power, and is very sensitive. Along with gas detection capabilities, this device may someday also be configured to detect smoke and other harmful gases. By embedding this chip into workers uniforms, name tags, etc., this could be a lifesaving computational accessory. In addition to the future safety technology soon to be available as accessories are devices that are for entertainment and security. The LCI computer group is developing a Smartpen, that electronically verifies a user's signature. With the increase in credit card use and the rise in forgeries, is the need for commercial industries to constantly verify signatures. This Smartpen writes like a normal pen but uses sensors to detect the motion of the pen as the user signs their name to authenticate the signature. This computational accessory should be available in 1999, and would bring increased peace of mind to consumers and vendors alike. In the entertainment domain, Panasonic is creating the first portable hand-held DVD player. This device weight less than 3 pounds and has a screen about 6' across. The color LCD has the same 16:9 aspect ratio of a cinema screen and supports a high resolution of 280,000 pixels and stereo sound. The player can play standard DVD movies and has a hour battery life for mobile use. To summarize, in this paper we presented concepts related to the design and use of wearable computers with extensions to smart spaces. For some time, researchers in telerobotics have used computer graphics to enhance remote scenes. Recent advances in augmented reality displays make it possible to enhance the user's local environment with 'information'. As shown in this paper, there are many application areas for this technology such as medicine, manufacturing, training, and recreation. Wearable computers allow a much closer association of information with the user. By embedding sensors in the wearable to allow it to see what the user sees, hear what the user hears, sense the user's physical state, and analyze what the user is typing, an intelligent agent may be able to analyze what the user is doing and try to predict the resources he will need next or in the near future. Using this information, the agent may download files, reserve communications bandwidth, post reminders, or automatically send updates to colleagues to help facilitate the user's daily interactions. This intelligent wearable computer would be able to act as a personal assistant, who is always around, knows the user's personal preferences and tastes, and tries to streamline interactions with the rest of the world.

• Journal of Animal Science and Technology
• /
• v.51 no.3
• /
• pp.241-248
• /
• 2009

Metabolic trial with 3 fistulated sheep was conducted in a 3 $\times$ 3 Latin square design and feeding trial with 24 Hanwoo steers in 12 month of age for 20 months was conducted to investigate the replacing effect of rice straw with fermented spent mushroom (Flammuliua velutipes) compost (FSMC) on fermentation characteristics, ruminal effective degradabilty and whole tract digestibility of nutrients in sheep, and to examine the growth performance of Hanwoo steers. Experimental diets for the metabolic trial with sheep were commercial concentrates and rice straw in the ratio of 70 : 30 (CON, DM basis). Same concentrate with 30% FSMC and 70% rice straw (FSMC-30) and 60% FSMC and 40% rice straw(FSMC-60). Diets for Hanwoo steers in three treatments were same as for metabolic trial in replacing ratio of rice straw with FSMC. pH of rumen fluid in sheep was not affected by FSMC. Ammonia-N content in the rumen fluid was highest in the sheep fed FSMC-60 at 3h (P<0.045). The CON diet increased (P<0.001) acetate proportion at 1h and 3h post feeding compared to FSMC-60 diet while propionate proportion was highest in the sheep fed FSMC-60 diet for all the sampling times (P<0.027~P<0.002). Increased proportion of butyrate was observed at 30 min prior to feeding (P<0.031), and 1h (P<0.011) and 6h(P<0.039) post feeding from sheep fed FSMC-30 diet compared to those from sheep fed other diets. Effective degradability in the rumen was not influenced by experimental diets. Whole tract digestibility of crude protein (P<0.031) and neutral detergent fiber (P<0.006) tended to be increased in the sheep fed CON diet while corresponding values were lowest in the sheep fed FSMC-60 diet. Total body weight gain of Hanwoo steers for 8 months was not different among diets, thus daily body gain was not influenced by the experimental diets.