• Journal of Animal Science and Technology
• /
• 제54권3호
• /
• pp.175-183
• /
• 2012

The present study was conducted to investigate the relationships of muscle fiber characteristics to dietary energy density [3.0(Low-E) vs. 3.2 (Med-E) Mcal DE/kg)] and slaughter weight [SW; 110, 125, and 138 kg] in finishing pigs (gilt vs. barrow) using a $2{\times}3{\times}2$ factorial treatment design. Forty-one longissimus dorsi muscle (LM) samples were analyzed histochemically, with growth performance and physicochemical data for the 41 animals and their LM out of 192 animals and 72 LM used in a previous study retrospectively included. The ADG was less (P<0.01) in the Low-E than in the Med-E group (0.93 vs. 0.73 kg) whereas lightness ($L^*$) and redness ($a^*$) of LM were greater in the Low-E group SW did not influence these variables. The diameter and perimeter of the type I (slow-oxidative), type IIA (fast oxido-glycolytic) and type IIB (fast glycolytic) fibers increased with increasing SW whereas densities of the fibers decreased. However, the number and area percentages of the fiber types were not influenced by SW or dietary energy density. The percentage and per-$mm^2$ density of type IIB fibers were negatively correlated with SW (r = -0.33 and -0.57, with P<0.05 and <0.01, respectively), whereas type I fiber number percentage was positively correlated with SW (r = 0.31; P<0.05). Marbling score was negatively correlated (P<0.05) with type I (r = -0.36) and type IIB (r = -0.39) fiber densities. The $a^*$ was correlated (P<0.01) with both type I and type IIB fiber number percentages in the opposite way (r = 0.42 and -0.47, respectively). However, $L^*$ (lightness), drip loss and $pH_{24h}$ were not correlated with the fiber number percentage or density of any fiber type. Collectively, results indicate that muscle fibers grow by hypertrophy during the late finishing period, but that fiber characteristics other than the size are not significantly influenced by dietary energy density or SW.

• Kyungpook Mathematical Journal
• /
• 제54권2호
• /
• pp.203-209
• /
• 2014

We assume that the existence and termination conjecture for flips holds. A complex projective manifold is said to be of almost general type if the intersection number of the canonical divisor with every very general curve is strictly positive. Let f be an algebraic fiber space from X to Y. Then the manifold X is of almost general type if every very general fiber F and the base space Y of f are of almost general type.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 추계학술대회논문집
• /
• pp.176-181
• /
• 1997

During a compression molding of continuous fiber reinforced composites, the separation of matrix and fiber is caused by the flow of the molding process. As the characteristics of the products are greatly dependent on the separation, it is very important to clarify the separation in relation to molding condition, degree of needle punching number on the degree of nonhomogeneity are studied.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.55-60
• /
• 2001

Influencing factors on flexural toughness of ring-type fiber reinforced concrete(RSFRC) are investigated. An experiment proceeding ASTM C 78 is peformed to make a comparison between ring-type fibers and double-hook type fibers. Most specimen with ring type fibers have failed by the cone type failure, while discrete hook type fibers have failed by fiber pullout. For the hook-type fiber reinforced concrete(SFRC), the first crack load increases, as the fiber mixing volume increases. Aspect ratio(fiber length/fiber diameter) is critical for hook type fibers, so the flexural toughness increases significantly, as the length of fiber increases. However, for the ring type, the toughness indices Increase as the number of fibers in the specimen increases. Since there is no bond problem between the ring fiber and the concrete matrix, the aspect ratio does not affect the performance of the composite material with the newly developed steel fibers. Influencing factors with respect to flexural toughness RSFRC were observed to be ring diameter, diameter of steel fiber and fiber content.

• Advances in concrete construction
• /
• 제5권6호
• /
• pp.613-624
• /
• 2017

In this paper, an experimental investigation was carried out to study the effect of volume fraction of fiber and maximum aggregate size on mode-I fracture parameters of high strength concrete. Total of 108 beams were tested on loading frame with three point loading, the variables in the high strength concrete beams are aggregate size (20 mm, 16 mm and 10 mm) and volume fraction of fibers (0%, 0.5%, 1% and 1.5%). The fracture parameters like fracture energy, brittleness number and fracture process zone were analyzed by the size effect method (SEM). It was found that fracture energy (Gf) increases with increasing the Maximum aggregate size and also increasing the volume of fibers, brittleness number (${\beta}$) decreases and fracture process zone (CF) increases.

• 한국염색가공학회지
• /
• 제12권1호
• /
• pp.52-60
• /
• 2000

In the prior studies, we reported that the dye uptakes of C. I. Disperse Violet 1 on polyester fiber in hexane and cyclohexane were higher than those in the other solvents, as the number of carbon atoms of alkanes decreased, the dye uptake increased, and the logarithmic plot of the dye uptakes vs. the solubilities of the dye showed that the dye uptakes are inversely proportional to the solubilities. In this study, for Interpretation of dyeing behavior of C. I. Disperse Violet 1 on polyester in alkanes, the thremodynamic parameters of dyeing, such as standard affnity, heat of dyeing(enthalpy change), entropy change, diffusion coefficient, and activation energy of diffusion, were obtained from isotherms and dyeing rates at different temperature. As the number of carbon atoms of alkanes increased, the standard affinity decreased, but the heat of dyeing(enthalpy change) and the entropy change showed larger negative values. These results mean that as the number of carbon atoms of alkanes increases, the dye uptake decreases, but both the fraction of the dye molecules dyed at relatively highly aligned or compact region of polyester fiber and the regularity of dye aggregates in the fiber become increased. As the number of carbon atoms of alkanes increased, the diffusion coefficient decreased, but the activation energy of diffusion increased. In the alkane of larger number of carbon atoms, because the solubility of the dye is higher, the desorption rate of the dye is faster and the diffusion coefficient is smaller than those in the smaller alkanes. But the energy required to separate the dye molecules from the alkane molecules is much higher because the interaction between the alkane molecule and the dye molecule become strong with the number of carbon atoms.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.659-663
• /
• 1995

The fiber oriented conditied inside fiber reinforced composite material is a basic factor of mechanical properties of composite materials. It is very important to measure the fiber orientation angel for the determination of molding conditions, mechanical charactistics, and the design of composite materials. In the work, the fiber orientation distribution of simulation figure plotted by PC is measured using image processing in order to examine thr accuracy of intersection counting method. The fiber orientation function measured by intersection countingmethod using image processing is compared with the calculated fiber orientation function. The results show that the measured value of fiber orientation function using intersection counting method is lower than the calculated value, because the number of intersection between the secant line and the fiber with smaller fiber aspect ratio is counted less than with larger fiber aspect ratio.

• Geomechanics and Engineering
• /
• 제18권5호
• /
• pp.503-513
• /
• 2019

In the present, the liquefaction potential of fiber-reinforced sandy soils was investigated through the energy-based approach by conducting a series of strain-controlled cyclic simple shear tests. In the tests, the effects of the fiber properties, such as the fiber content, fiber length, relative density and effective stress, and the test parameters on sandy soil improvement were investigated. The results indicated that the fiber inclusion yields to higher cumulative liquefaction energy values compared to the unreinforced (plain) ground by increasing the number of cycles and shear strength needed for the liquefaction of the soil. This result reveals that the fiber inclusion increases the resistance of the soil to liquefaction. However, the increase in the fiber content was determined to be more effective on the test results compared to the fiber length. Furthermore, the increase in the relative density of the soil increases the efficiency of the fibers on soil strengthening.

• International Journal of Concrete Structures and Materials
• /
• 제11권1호
• /
• pp.29-43
• /
• 2017

This study investigates the blast resistance of fiber-reinforced cementitious composite (FRCC) panels, with fiber volume fractions of 2%, subjected to contact explosions using an emulsion explosive. A number of FRCC panels with five different fiber mixtures (i.e., micro polyvinyl alcohol fiber, micro polyethylene fiber, macro hooked-end steel fiber, micro polyvinyl alcohol fiber with macro hooked-end steel fiber, and micro polyethylene fiber with macro hooked-end steel fiber) were fabricated and tested. In addition, the blast resistance of plain panels (i.e., non-fiber-reinforced high strength concrete, and non-fiber-reinforced cementitious composites) were examined for comparison with those of the FRCC panels. The resistance of the panels to spall failure improved with the addition of micro synthetic fibers and/or macro hooked-end steel fibers as compared to those of the plain panels. The fracture energy of the FRCC panels was significantly higher than that of the plain panels, which reduced the local damage experienced by the FRCCs. The cracks on the back side of the micro synthetic fiber-reinforced panel due to contact explosions were greatly controlled compared to the macro hooked-end steel fiber-reinforced panel. However, the blast resistance of the macro hooked-end steel fiber-reinforced panel was improved by hybrid with micro synthetic fibers.

• 대한기계학회논문집
• /
• 제18권10호
• /
• pp.2514-2522
• /
• 1994

The mirror surface grinding of carbon fiber reinforced plastics(CFRP) was realized by using the metal bonded super-abrasive micro grain wheel with electrolytic in-process dressing(ELID). The maximum surface roughness $R_{max}$ of CFRP which was obtained with #6,000 wheel, was 0.65 $\mu{m}$, which was rougher surface finish compared to those of hard and brittle materials with the same mesh number wheel with ELID. The grinding performance was much dependent on the grinding direction and the best surface roughness was obtained at $90^{\circ}C$ grinding with fiber direction. The spark-out effect on the surface improvement was significant when smaller mesh number grinding wheels were used. From the surface observations of CFRP with scanning electron microscope(SEM) and Auger electron spectroscopy(AES), it was found that the mirror surface grinding of CFRP was generated by the homogenization due to carbonization of the ground surface and smearing of chips composed of the carbon fiber and carbonized epoxy resin into the ground surface.