• 한국세라믹학회지
• /
• 제29권5호
• /
• pp.383-390
• /
• 1992

We investigated the effect of substrate on the properties of the Ni-Zn-Cu ferrite thin films deposited on SiO2 (1000∼3000${\AA}$) / Si (100) substrate at various conditions by rf magnetron sputtering. A disktype Ni-Zn-Cu ferrite sintered by conventional ceramic process and argon gas were used as a target and a sputtering gas, repectively. The compositions of the thin films measured by EPMA were similar to target composition (Fe: 65.8 at%, Ni: 12.7 at%, Cu: 6.7 at%, Zn: 14.8 at%) irrespective of substrate temperature. Amorphous thin films were deposited when substrate was not intentionally heated, but the films came to crystallize with increasing substrate temperature, and crystalline thin films were deposited at substrate temperature above 200$^{\circ}C$. Below 250$^{\circ}C$ saturation magnetization (Ms), remanence (Mr) and coercivity (Hc) of the ferrite thin film increased with the substrate temperature due to the increase of grain size and the improvement of crystallinity. And above 250$^{\circ}C$, Ms, Mr increased slightly, but Hc of the amorphous thin films increased due to crystallization, whereas that of the crystalline thin films decreased because of grain growth and stress release.

• Journal of Magnetics
• /
• 제2권1호
• /
• pp.16-21
• /
• 1997

Those were investigated, the crystallographic, morphological, and magnetic properties of barium ferrite film (SiO2/Si substrate) prepared by sol-gel dip coating. Appropriate sol was prepared by dissolvin barium and iron nitrate in ethylene glycol at 80$^{\circ}C$. To obtain the films, thermally oxidized p-type silicon substrate with (111) of crystallographic orientation were dipped into the sol, dried at 250$^{\circ}C$ to remove organic material, and heated at 800$^{\circ}C$ for 3 hours in air for the crystallization of barium ferrite. It was found that the particles of barium ferrite formed on the substrate exhibited needle-like shape placing parallel to the substrate and its c-axis is long axis direction. There was tendency that the coercive force in horizontal direction to the substrate was higher than that in vertical direction to it. This tendency was profound in large thickness.

• 한국세라믹학회지
• /
• 제37권5호
• /
• pp.425-431
• /
• 2000

Cobalt ferrite thin films on Corming glass substrate were fabricated by a sol-gel method. Cobalt ferrite thin films with the grain size of 20-35 nm and thickness of 50nm were obtained. Rapid thermal annealing (RTA) and Annealing processes were adopted for comparison of characteristics of the films. Coercivity values were changed with thermal condition and magnetization values were increased as a function of soaking time. With prolonged soaking time, however, it was decreased because of the diffusion of cations from the glass substrate. The RTA process in preparation of cobalt ferrite thin film was the effective way to prevent and to form a single spinel phase in reduced soaking time. The film heated at 600$^{\circ}C$ for 30 minutes by RTA had coercivity of 2,600 Oe, saturation magnetization 460 emu/㎤, and Mr$.$$\delta$ of 1.43 memu/$\textrm{cm}^2$.

• 한국자기학회지
• /
• 제15권2호
• /
• pp.125-129
• /
• 2005

$A1_2O_3$ 기판을 하지층으로 하는 Ba-ferrite 박막을 pulsed laser deposition system으로 제조하여 결정학적 및 자기적 성질을 SEM, $M\ddot{o}ssbauer$ 분광법 및 VSM을 사용하여 연구하였다. Ba-ferrite박막은 $A1_2O_3$ 기판위에 PLD를 이용하여 기판온도 $400^{\circ}C$, 산소압력 0.1 Torr로 증착 하였고 증착 시간을 달리하여 두께 조절하였다. Ba-ferrite 박막은 5분 증착한 시료에서만 판상으로 결정이 형성되었음을 볼 수 있고 그보다 두꺼운 시료의 경우에는 침상모양과 판상모양이 임의의 방향으로 혼재되었음을 확인하였다. $M\ddot{o}ssbauer$ssbauer 분광법으로부터 측정된 Ba-ferrite결정 내 Fe 원자의 스핀 방향은 두께가 얇을수록 판상의 결정이 많이 존재하여 기판에 수직으로 정렬하려는 경향을 보이고 있다. VSM으로 측정한 자기이력곡선은 판상과 침상의 상이한 2가지 형태가 공존하는 것으로 나타났다.

• Journal of Magnetics
• /
• 제3권2호
• /
• pp.64-67
• /
• 1998

Microwave absorbing properties of ferrite-epoxy composite (absorbing layer) attached on the carbon fiber polymer composite (reflective substrate) are analyzed on the basis of wave propagation theory. A modified equation for wave-impedance-matching at the front surface of absorbing layer including the effect of electrical properties of the quasi-conducting substrate is proposed. Based on this analysis, the frequency and layer dimension that produce zero-reflection can be estimated from the intrinsic material properties of the obsorbing layer and the substrate. It is demonstrated that the microwave reflectivity of carbon fiber composite has a strong influence on the microwave absorbance of front magnetic layer.

• 한국자기학회지
• /
• 제13권2호
• /
• pp.64-69
• /
• 2003

Si 기판 위에 $\alpha$-Fe$_2$O$_3$을 하지층으로 하는 Ba-ferrite 박막을 pulsed laser deposition system으로 제조하여 결정학적 및 자기적 성질을 X선 회절, SEM, Mossbauer 분광법 및 VSM을 사용하여 연구하였다. $\alpha$-Fe$_2$O$_3$박막은 Si 기판위에 PLD를 이용하여 기판온도 400 $^{\circ}C$, 산소압력 0.1 Torr로 5분간 증착 하였고 그 위에 두께를 달리하여 Ba-ferrite 박막을 제조하였다. Ba-ferrite 결정은 가늘고 긴 모양의 결정립들로 형성되었으며 두께에 따라 그 모양과 상태가 변화하였다. Mossbauer 분광법으로부터 Ba-ferrite 결정내의 Fe 원자의 스핀 방향은 두께가 얇을수록 하지층의 영향으로 기판에 수직으로 정렬하려는 경향을 보이고 있음을 확인하였다. 자기이력곡선의 각형비 역시 두께가 얇을수록 더 크며 이러한 특성은 수평에 비하여 수직의 경우가 더 강하게 나타났다. 보자력 역시 같은 경향을 보이나 포화자화의 값은 수평의 경우에 더 큰 값을 나타내었다. 결정구조는 Magnetoplumbite로서 두께가 작아질수록 결정상수 $\alpha$는 감소하고 c는 증가하는 경향을 보였다.

• ETRI Journal
• /
• 제41권3호
• /
• pp.289-297
• /
• 2019

In this paper, a wideband, circularly polarized patch antenna is proposed that leverages the unidirectional resonant modes of a circular patch mounted on top of a grounded dielectric-ferrite substrate. The proposed antenna is fed via the proximity coupling method and several parasitically coupled patches are placed on a dielectric superstrate to enhance the impedance bandwidth of the antenna. The resonant modes of the structure rotate only in the clockwise or counter clockwise directions. In the frequency range where the effective permeability of the ferrite layer is negative, the resonance frequencies of these modes differ significantly, which produces a large axial ratio (AR) bandwidth. For the proposed antenna, the numerical results show the 10 dB impedance bandwidth to be around 44% and the 3 dB axial ratio bandwidth to be higher than 64%.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 1998년도 춘계연구발표회 논문개요집
• /
• pp.20-21
• /
• 1998

• 전자공학회논문지A
• /
• 제33A권5호
• /
• pp.65-74
• /
• 1996

in this paper, the propagation characteristics of the dominant modes in multiple coupled microstrip lines on a magnetized ferrite substrate are analyzed. The propagation constants and characteristic impedances are calculated by using the spectral domain method. With the numerical results, multi-port impedance parameters as well as scattering parameters are derived from nonreciprocal transmission line equations which are consistent with conventional transmission line theory. In additon, the numerical resutls of nonreciprocal characteristics for various values of structural, material parameters, and external magnetic fields are also presented.

• 한국자기학회지
• /
• 제11권3호
• /
• pp.129-133
• /
• 2001

본 연구에서는 TiO$_2$ 하지층이 첨가된 hexagonal barium-ferrite(BaM) 박막을 RF/DC magnetron sputtering system을 이용하여 상온에서 증착한 후, 여러 온도에서 열처리하여 결정화하였다. BaM박막에 TiO$_2$ 하지층을 첨가하여 열처리한 경우 Si와 BaM의 (006), (106), (114), (217), (2011) peak들이 사라지고 (008)의 intensity가 낮아졌으며 SiO$_2$와 (116), (302)의 peak들이 성장하였음을 XRD pattern을 통하여 알 수 있었다. BaM 박막의 자기적 특성을 VSM을 통하여 알아본 결과, 보자력, 잔류자화, 각형비 등의 자기적인 특성들은 수직에 비해 수평이 더 좋게 나타났는데, 이러한 결과로 박막면에 평행한 방향으로의 자화용이축이 존재하고 있다는 것을 알 수 있었다. SEM을 통하여 증착압력 및 열처리 시간에 따른 결정화 정도와 자기적 특성을 알아본 결과 5 mTor 보다 10 mTrr에서 더 좋게 나타났으며, 열처리를 시작한 뒤 10분 이내에 750 $^{\circ}C$ 이상에서 대부분의 특성변화가 일어났음을 알 수 있었다.