• 대한소아치과학회지
• /
• 제27권1호
• /
• pp.77-84
• /
• 2000

치수절단술은 유치의 치수치료 방법 중 사용빈도가 높은 시술 중 하나로 치수절단 술식에 사용되는 약제는 치수나 주위조직에 무해하여야 하며, 감염이나 내흡수 등의 부작용이 없어야 한다. 본 연구는 임상에서 유치의 지혈적 치수절단 술식의 약제로 사용되는 ferric sulfate의 유전자 독성을 평가할 목적으로 human gingival fibroblast에 ferric sulfate를 다양한 농도와 접촉시간을 설정한 후 comet assay를 이용하여 유전자 독성을 평가하여 보았다. 그 결과는 다음과 같다. 1. 농도에 따른 세포의 유전자 손상정도의 변화는 ferric sulfate의 농도에 비례하여 유전자 손상이 증가하는 양상을 나타내었다. 2. 농도에 따른 세포의 유전자 손상정도는 0.1mM 이상의 농도에서 대조군과 유의한 차이를 나타내었다(p<0.05). 3. 시간경과에 따른 세포의 유전자 독성의 변화는 대조군과 유의한 차이를 보이지 않았다(p>0.05).

• 대한소아치과학회지
• /
• 제27권2호
• /
• pp.333-343
• /
• 2000

본 연구의 목적은 성견 치아에서 ferric sulfate로 치수절단술을 시행하고 상부 이장재의 영향을 최소화한 후에 잔존 치수 조직 반응을 formocresol을 사용한 군과 조직병리학적으로 비교 평가하는 것이다. 생후 $6\sim7$개월, 체중 $10\sim12Kg$ 정도의 성견 5마리의 전치 40개에 5급 와동을 형성하여 치수절단술을 시행하였다. 치수를 formocresol과 ferric sulfate를 이용하여 복조를 시행하고 IRM으로 밀봉하였다. 실험동물은 3일, 1주, 2주, 4주, 그리고 8주 후에 관류 고정하여 희생되었으며, 표본을 광학현미경으로 관찰하여 다음과 같은 결론을 얻었다. 1. Ferric sulfate군과 formocresol군 모두에서 치수절단술 후에 염증 반응을 보였지만 ferric sulfate군에서 현저히 감소된 염증 양상과 빠른 치수조직 회복소견을 보였다. 2. Ferric sulfate군에서 치수절단술 후 치수 측벽의 상아모세포의 배열 양상은 초기에는 치관부 1/3에 불규칙한 배열양상을 나타내었지만 2주 후부터는 대체로 회복된 양상을 보였다 그러나 formocresol군에서는 불규칙한 배열양상이 실험기간 동안 지속되었다. 3. 치근을 따라 넓고 길게 형성된 수복상아질층이 formocresol군 8주의 1개 치아에서 나타났으며 상아질교의 형성은 ferric sulfate군 8주의 2개 치아에서 관찰할 수 있었다.

• 대한소아치과학회지
• /
• 제29권1호
• /
• pp.38-43
• /
• 2002

15.5% ferric sulfate solution을 이용하여 유치치수절단술을 시행한 유구치의 상태를 임상적, 방사선학적으로 평가를 하여 이를 20%로 희석한 formocresol로 치수절단술을 시행한 경우와 비교하였다. 1997년부터 1998년까지 서울대학교병원 소아치과에서 치료를 받은 건강한 환아를 대상으로 하였고, ferric sulfate를 이용한 치수절단술을 치료받은 30개의 치아와 20%로 희석한 formocresol로 치수절단술치료한 23개의 치아, 총 53개의 치아를 평균 34개월 후 follow-up하여 그 임상적, 방사선학적 상태를 조사하였다. ferric sulfate군의 전체적인 성공률은 80.0%이었고, formocresol군의 성공률은 81.0%이었다. 두 군의 결과 차이를 카이제곱검정의 통계방법으로 분석하였다. ferric sulfate군의 4개와 formocresol군의 4개의 치아가 외흡수를 보였고 근단부 치조골파괴는 ferric sulfate군의 3개와 formocresol군의 2개에서 보였다. ferric sulfate군과 formocresol군 사이의 성공률은 통계학적으로 유의한 차이를 보이지 않았다.

• 대한소아치과학회지
• /
• 제25권4호
• /
• pp.843-848
• /
• 1998

Pulpotomy is a frequently used treatment modality in primary teeth. It is method by which infected coronal pulp is removed while retaining vital radicular pulp. Since its introduction in 1930 by Sweet formocresol remains the most popular medicament for this treatment. However, despite its outstanding bactericidal properties, formocresol is known to cause adverse tissue reactions. Theoretically, formocresol disinfects and fixes radicular pulp and thus prevents infection and internal resorption. In reality, however, it leads to chronic inflammation and is sometimes responsible for failures through abscess formation and internal root resorption. Also, Myers et al., in 1978, reported on the systemic distribution of FC and other studies have followed with reports of its immunological, mutagenic and carcinogenic effects. Much effort has, therefore, focused on the development of alternative medicaments and techniques. Since its introduction in 19C, ferric sulfate proven itself as an effective hemostatic agent and is used as an astringent in dentistry. In 1988, Landau and Johnsen suggested ferric sulfate be used as a medicament in pulpotomy and many studies have focused on it to overcome the toxic effects of FC. Ferric sulfate acts through its ferric ion and iron ion, which react with blood protein leading to aggregation. The aggregated protein acts to plug the blood vessels, causing mechanical hemostasis. As blood clot formation is minimal, there is reduced inflammation of radicular pulp and enhanced healing. There are no reports regarding its systemic distribution. This is a report of cases treated by the author using pulpotomy with ferric sulfate.

• 한국염색가공학회지
• /
• 제14권2호
• /
• pp.40-50
• /
• 2002

In order to remove the pollutants effectively in the dye wastewater by chemical precipitation process, coagulation arid flocculation test were carried out using several coagulants on various reaction conditions. It was found that the Ferrous sulfate was the most effective coagulant for the removal of disperse dye(B79), and we could get the best result lot the removal of disperse dye(B56) in the aspects of TOC removal efficiency and sludge field. When the Ferrous sulfate dosage was $800mg/\ell$, the sludge settling velocity was very fast>, and the color was effectively removed in the disperse dye(B79) solution. Although the color removal was ineffective when the Alum was used as a coagulant, the sludge field was decreased in comparison with the Ferrous sulfate or the Ferric sulfate was used in the disperse dye(B56) solution. The general color removal effect for the disperse dye(B56 and B79) solutions, the Ferric sulfate was more proper coagulant than the Alum. It was showed that TOC removal was improved 5% and over by the addition of Calcium hydroxide, and $30mg/\ell$ of sludge yield was decreased(B79). When Alum or Ferric sulfate was used as a coagulant, pH condition for most effective color removal was 5 in B56 solution. In case of Ferrous sulfate as a coagulant, most effective pH condition for color removal was 9. When Ferric sulfate or Ferrous sulfate was used as a coagulant, pH condition for most effective color removal was 9 in B79 solution.

• 상하수도학회지
• /
• 제26권2호
• /
• pp.295-302
• /
• 2012

The coagulation of combined sewer overflows ($CSO_{s}$) was investigated by jar-testing with several commercial coagulants. $CSO_{s}$ sample showed different characteristics of coagulation from secondary wastewater with three common coagulants, aluminum sulfate, ferric chloride and polyaluminum chloride (PACl). Jar-tests showed that relatively wide range of optimal SS and T-P removal yielded with alum and ferric chloride compared with cationic polymers, though efficient SS and T-P removal can be achieved with all three coagulants. The decrease of pH was caused by the increase in dosage of aluminum sulfate, ferric chloride and PACl as coagulants. The pH was changed from 7.0 to 4.7 with the dosages of ferric chloride 25 mL/L. Aluminum sulfate revealed pH of 5.0 and PACl was highest pH of 5.4 after dosing of coagulants. The optimal pH to treat $CSO_{s}$ with aluminum sulfate were 6-6.5; with PACl 6-7, and with ferric chloride higher than 7.

• 상하수도학회지
• /
• 제24권4호
• /
• pp.463-474
• /
• 2010

In this study, chemical coagulation conditions for treating combined sewer overflow(CSO) occurred during rainy season were evaluated by jar tests with aluminum sulfate[$Al_2(SO_4)_3{\cdot}17H_2O$] and ferric chloride[$FeCl_3{\cdot}6H_2O$]. The raw domestic sewage sampled from the primary sedimentation tank at a local sewage treatment plant was filtered through $150{\mu}m$ sieve before using. Point of zero charge(PZC) for various dose of aluminum sulfate occurred at pH 5.8-6.5, while for ferric chloride occurred at pH 5.3-6.0 in term of streaming current(SC) values. Charge neutralization ability of aluminum sulfate was bigger than that of ferric chloride. Optimum pH and dose of aluminum sulfate and ferric chloride were 6.2, 0.438mM and 5.8, 0.925mM, respectively. Removal efficiencies of TCOD, turbidity, SS and TP were 75, 97, 95, 96% with aluminum sulfate and 74, 96, 98, 99% with ferric chloride at their optimum coagulation conditions. More efficient removal of SS, TP and small particles was possible with ferric chloride at optimum coagulation conditions. Both SC values and COD removal started to increase where soluble phosphorus was completely removed.

• 한국재료학회지
• /
• 제21권4호
• /
• pp.225-231
• /
• 2011

The effect of ferrous/ferric molar ratio on the formation of nano-sized magnetite particles was investigated by a co-precipitation method. Ferrous sulfate and ferric sulfate were used as iron sources and sodium hydroxide was used as a precipitant. In this experiment, the variables were the ferrous/ferric molar ratio (1.0, 1.25, 2.5 and 5.0) and the equivalent ratio (0.10, 0.25, 0.50, 0.75, 1.0, 2.0 and 3.0), while the reaction temperature ($25^{\circ}C$) and reaction time (30 min.) were fixed. Argon gas was flowed during the reactions to prevent the $Fe^{2+}$ from oxidizing in the air. Single-phase magnetite was synthesized when the equivalent ratio was above 2.0 with the ferrous/ferric molar ratios. However, goethite and magnetite were synthesized when the equivalent ratio was 1.0. The crystallinity of magnetite increased as the equivalent ratio increased up to 3.0. The crystallite size (5.6 to 11.6 nm), median particle size (15.4 to 19.5 nm), and saturation magnetization (43 to 71 $emu.g^{-1}$) changed depending on the ferrous/ferric molar ratio. The highest saturation magnetization (71 $emu.g^{-1}$) was obtained when the equivalent ratio was 3.0 and the ferrous/ferric molar ratio was 2.5.

• 한국염색가공학회지
• /
• 제9권6호
• /
• pp.26-32
• /
• 1997

In order to remove the pollutants effectively in the dye-processing wastewater by chemical precipitation, coagulation and flocculation test was carried out using several coagulants on various reaction conditions. It was found that the Ferric sulfate was best coagulant for the treatment of mixed dye-processing wastewater. When the Ferric sulfate dosage was 1,100mg/$\ell$, the COD removal rate was very high(50%), and the color was removed very effectively. The COD was decreased relatively well up to 40%, when Alum was dosed as coagulant. But it was difficult to remove the color effectively. Test results about COD removal for the Ferrous sulfate and the Ferric chloride used were mostly same as those of the Alum used. However, the color removal by the Ferrous sulfate was much better than the case of the Alum or the Ferric chloride. It was found that the COD removal was increased and the sludge yield was decreased by pH control before polymer flocculant addition, during the jar test for the Ferrous sulfate and the Ferric sulfate as a coagulant.

• 한국재료학회지
• /
• 제20권6호
• /
• pp.301-306
• /
• 2010

The chemical formula of magnetite ($Fe_3O_4$) is $FeO{\cdot}Fe_2O_3$, t magnetite being composed of divalent ferrous ion and trivalent ferric ion. In this study, the influence of the coexistence of ferrous and ferric ion on the formation of iron oxide was investigated. The effect of the co-precipitation parameters (equivalent ratio and reaction temperature) on the formation of iron oxide was investigated using ferric sulfate, ferrous sulfate and ammonia. The equivalent ratio was varied from 0.1 to 3.0 and the reaction temperature was varied from 25 to 75. The concentration of the three starting solutions was 0.01mole. Jarosite was formed when equivalent ratios were 0.1-0.25 and jarosite, goethite, magnetite were formed when equivalent ratios were 0.25-0.6. Single-phase magnetite was formed when the equivalent ratio was above 0.65. The crystallite size and median particle size of the magnetite decreased when the equivalent ratio was increased from 0.65 to 3.0. However, the crystallite size and median particle size of the magnetite increased when the reaction temperature was increased from $25^{\circ}C$ to $75^{\circ}C$. When ferric and ferrous sulfates were used together, the synthetic conditions to get single phase magnetite became simpler than when ferrous sulfate was used alone because of the co-existence of $Fe^{2+}$ and $Fe^{3+}$ in the solution.