• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 Techno-Fair 및 추계학술대회 논문집 전기물성,응용부문
• /
• pp.177-179
• /
• 2007

기존의 fence전극구조는 ITO구조에 비해 휘도가 감소하여 효율이 떨어지는 것으로 알려져 있다. 따라서 효율 상승을 위하여 다음과 같은 fence 구조를 제안하였다. 실험은 reference(II-fence형 전극구조)와 제안된 구조(II-fence형 돌기격벽측배치)로 구성되어있는 4-inch AC-PDP 패널을 직접 제작하여 discharge current, luminance, luminous efficiency를 측정하여 비교하였다. 제안된 구조의 휘도는 약 5% 감소하였으나, 방전전류가 최대 14% 감소하였고, 효율면에서 최대 12%의 효율 상승을 가진다.

• 한국환경복원기술학회지
• /
• 제20권1호
• /
• pp.117-129
• /
• 2017

This research was conducted to construct a tree belt around Saemangeum reclaimed land using various planting methods and to analyze initial growth amount, to provide practical data to construct tree belt of various purposes. Tree species used in tree belt construction were Pinus thunbergii and Quercus serrata, and the main planting treatment methods used were categorized by existence of windy fence, mixed planting, and un-mixed planting. Growth amount analysis was conducted using ANOVA to compare growth amounts in different experimental groups and Duncan's multiple range test. Growth amount analysis results of tree belt by planting method showed that it is most statistically plausible to install 50% porous windy fence from the direction of wind and frost, followed by planting P. thunbergii and Q. serrata in areas that require mixed tree species tree belt around Saemangeum reclaimed land. In areas where un-mixed planting tree belt is required, it was appropriate to use P. thunbergii alone without a windy fence. Lastly, if the purpose of the tree belt is limited to rapid growth, it was most ideal to plant P. thunbergii alone (without windy fence) or install 50% porous windy fence from the direction of wind and frost, followed by planting P. thunbergii and Q. serrata. This research is based on initial growth amount of tree belt and there is a need for a long-term monitoring of tree belt growth to increase tree-planting success rate in establishing tree belt according to Saemangeum internal development.

• 한국농공학회논문집
• /
• 제54권4호
• /
• pp.19-27
• /
• 2012

The objective of this study was to test the pollutant reduction effect by the silt fence and vegetated ridge through field monitoring. The experiment plots were established with two replication and three treatments. Each plot was designed with 5 m width, 22 m length, and 3 % slope. Flumes with the floating type stage gages were installed at the outlet of each plot to monitor the runoff. For a rainfall monitoring, tipping bucket rain gage was installed within the experiment site. Cultivated crops were spring daikon and autumn chinese cabbage. Analysis of variance (ANOVA) indicated that the water quality concentration from three experiment plots were not significantly different in 5 % of significant level. The monitoring results showed that the average pollution loads reduced by silt fence compared to control were SS 75.33 %, TN 40.87 %, TP 56.58 %, BOD 52.12 %, COD 36.07 %, TOC 34.99 %; by vegetated ridge compard to control were SS 65.27 %, TN 81.80 %, TP 54.26 %, BOD 67.09 %, COD 46.55 %, TOC 43.30 %. Analysis of Spearman's rank correlation coefficient showed that BOD-SS and SS-Turbidity were highly related at the silt fence and vegetated ridge plots. In all plots, SS-Turbidity and TP-TN relations were relatively high. The monitoring results showed that the silt fence and vegetated ridge were effect method to reduce the pollutant loads from the field runoff. Long-term monitoring is required to obtain more quantitative reduction effect for diverse crops and to increase the reliability of results.

• 한국추진공학회지
• /
• 제16권1호
• /
• pp.25-35
• /
• 2012

본 논문에서는 가스터빈 유로의 열유동 환경을 개선하기 위해 끝벽면 경계층 판을 이용한 방법을 적용하였으며, 이 방법에 의한 효과를 최대화하기 위해 경계층 판의 형상에 대한 최적화를 수행하였다. 터빈 유로를 모사하기 위해 $90^{\circ}$ 곡관을 이용하였다. 터빈 유로에서의 전압력 손실과 유로 끝벽면에서의 열전달 계수, 그리고 끝벽면 면적을 최소화하는 �微蛙� 판 형상 도출을 연구의 목적으로 하였으며, 최적화 과정의 효율성을 위해 근사 최적화 기법을 적용하였다. 연구결과를 통해, 최적화된 경계층 판에 의한 상당한 공력환경 개선을 확인할 수 있었으며, 열환경 개선 정도는 공력환경 개선정도에 비해 작게 나타났다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.853-858
• /
• 2000

The working fluid from the combustor to the turbine stage of a gas turbine makes various boundary layer thickness. Since the inlet boundary layer thickness is one of the important factors that affect the turbine efficiency. It is necessary to investigate secondary flow and loss with various boundary layer thickness conditions. In the present study, the effect of various inlet boundary layer thickness on secondary flow and loss and the proper height of the boundary layer fences for various boundary layer thickness were investigated. Measurements of secondary flow velocity and total pressure loss within and downstream of the passage were taken under 5 boundary layer thickness conditions, 16, 36, 52, 69, 110mm. It was found that total pressure loss and secondary flow areas were increased with increase of thickness but they were maintained almost at the same position. At the fellowing research about the boundary layer fences, 1/6, 1/3, 1/2 of each inlet boundary layer thickness and 12mm were used as the fence heights. As a result, it was observed that the proper height of the fences was generally constant since the passage vortex remained almost at the same position. Therefore once the geometry of a cascade is decided, the location of the Passage vortex and the proper fence height are appeared to be determined at the same time. When the inlet boundary layer thickness is relatively small, the loss caused by the proper fence becomes bigger than endwall loss so that it dominates secondary loss. In these cases the proper fence hight is decided not by the cascade geometry but by the inlet boundary layer thickness as previous investigations.

• 터널과지하공간
• /
• 제24권4호
• /
• pp.275-281
• /
• 2014

국내 국도에 분포하는 160개 비탈면에서의 발생한 낙석에너지의 특성을 고려하여 신뢰도지수를 산정하고 낙석방지울타리의 요구성능을 고찰하였다. 몬테카를로 시뮬레이션을 통해 낙석에너지를 결정하는 변수의 통계적 특성을 고찰한 결과 비탈면 경사는 정규분포형태이며, 낙석중량과 발생높이는 대수정규분포형태인 것으로 나타났다. 낙석에너지는 대수정규분포형태인 것으로 나타났으며 이는 낙석중량에 영향을 받은 결과로 판단된다. 낙석방지울타리의 신뢰성지수는 0.678이며 파괴확률은 24.9%로 매우 높은 것으로 나타났다. 국내의 낙석에너지 규모를 고려하여 제시된 낙석방지울타리의 요구성능은 최대 500kJ 수준이며 신뢰성지수의 범위는 1.028~1.956으로 분석되었다. 제시된 신뢰도지수를 통해 비탈면의 낙석에너지가 고려된 요구성능을 적용할 경우 낙석방지울타리의 파괴확률은 14.8~2.5% 수준인 것으로 분석되었다.

• 한국지반환경공학회 논문집
• /
• 제10권6호
• /
• pp.49-60
• /
• 2009

본 연구는 기존의 낙석방지울타리에 적용되는 와이어로프를 경강선으로 대체하고 소재 및 체결부에 대한 실내성능실험과 더불어 현장에서의 수직낙하시험을 통해 전체적인 에너지 흡수능력을 평가하여 새로운 낙석방지울타리를 개발하는데 있다. 12단 경강선 적용 낙석방지울타리의 수직낙하시험 결과, 국내 낙석방지울타리에 기준으로 적용되는 흡수에너지인 50kJ 이상의 에너지를 흡수하는 것으로 나타났다. 또한 경강선 단수가 12단에서 16단으로 증가함에 따라 에너지 흡수능력도 향상되었다. 이러한 새로운 낙석방지울타리를 도로공사 절취사면 현장에 성공적으로 적용하였다. 그 결과, 시공성은 기존에 비해 별차이가 없는 것으로 나타났으나 미관상 전체적으로 심플하고 깨끗한 이미지를 연출할 수 있었다. 경제성 분석결과에 있어서는 전체 건설비용에 있어 기존 대비 약 20% 정도 절감되는 것으로 나타났다.

• 한국농공학회논문집
• /
• 제55권6호
• /
• pp.145-154
• /
• 2013

Recently, damage occurrence by wind erosion has been increasing in society. In times past, such problems only took place in desert area ; however, in recent years, the wind erosion problem is spreading out to agricultural land. Wind erosion in agricultural land can cause loss of loam soils, the disturbance of the photosynthesis of the crop fields and serious economic losses. To overcome the mentioned problems, installation of windbreak fence can be recommended which function as disturbing strong wind and wind erosion. However, there is still no proper guideline to install the windbreak fence and the installation used to rely on the intuition of the workers due to the lack of related studies. Therefore, this study measured the aerodynamic resistance of screens of the windbreak fence using the apparatus for testing screens. The apparatus for testing screens was designed to measure pressure loss around the screen. Measured pressure loss by wall friction compensated for pressure loss to calculate the aerodynamic resistance of screens. The result of pressure loss by regression analysis derived the aerodynamic coefficient of Darcy-Forchheimer equation and power law equation. The aerodynamic resistance was constant regardless of the overlapped shape when the screen was overlapped into several layers. Increasing the number of layers of the screen, internal resistance increased significantly more, and pressure loss caused by the screen also increased linearly when the wind speed was certain conditions, but permeability had no tendency. In the future, the results of this study will be applied to the computational fluid dynamics simulation. The simulation models will be also validated in advance by wind tunnel experiments. It will provide standard of a design for constructing windbreak fence.

• 한국유체기계학회 논문집
• /
• 제12권2호
• /
• pp.8-16
• /
• 2009

The objective of this study is to investigate the three-dimensional turbulence flow characteristics of a rotor passage of an one-stage axial flow gas turbine and to investigate the effects of a boundary layer fence installed on the hub endwall of the rotor passage. Secondary flows occurring within the rotor passage (e.g. horseshoe vortex, passage vortex, and cross flow) cause secondary loss and reduce turbine efficiency. To control these secondary flows, a boundary layer fence measuring half the height of the thickness of the inlet boundary layer was installed on the hub endwall of the rotor passage. This study was performed numerically. The results show that the wake and secondary flows generated by the stator reduced the rotor load to constrain the development of cross flow and secondary flow reinforced by the rotor passage. In addition, the secondary vortices occurring within the rotor passage were reduced by the rotation of the rotor. Although, the boundary layer fence induced additional vortices, giving rise to an additional loss of turbine, its presence was shown to reduce the total pressure loss when compared to effects of the case without fence regardless of the relative position of blades by enervating secondary vortices occurred within the rotor passage.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제36회 춘계학술대회논문집
• /
• pp.406-413
• /
• 2011

본 논문에서는 가스터빈 유로의 공력열환경을 개선시키기 위해서 비축대칭 끝벽과 끝벽 경계층 판의 형상 최적화를 수행하였다. 터빈 유로 모사를 위해 $90^{\circ}$ 곡관을 이용하였다. 본 연구는 터빈 유로에서의 전압력 손실과 유로 끝벽에서의 열전달 계수를 최소화하기 위한 비축대칭 끝벽과 끝벽 경계층 판의 형상을 찾는 것이다. 최적화 과정의 효율성을 위해 근사 최적화 방식을 사용하였다. 최적화된 비축대칭 끝벽과 끝벽 경계층 판을 통해, 상당한 공력열환경 개선을 확인할 수 있었다.