• 한국초지조사료학회지
• /
• 제38권3호
• /
• pp.150-155
• /
• 2018

This study was conducted to determine grazing intensity of growing Korean native goats(Capra hircus coreanae) on mountainous pasture. It was carried out to obtain basic information for improvement of mountainous pasture management and establishing feeding system of Korean native goat. A total of 20 goats were grouped by feeding systems [A mountainous pasture grazing group (Concentrated feed of 1.5% body weight, treatment 1, T1, n=10) and a barn feeding group (TMR, treatment 2, T2), n=10] to conduct study from April to September. The average forage productivity of the mountain pasture was $500.9{\pm}61.41kg/ha$. The average dry matter intake in T1 was 0.64 and the calculated grazing intensity was 21 head/ha. In productivity, when the two treatments(T1, T2) were compared, the dry matter intake was about two to three times the difference. The average daily gain per day during the experiment was 63.3 in the mountain pasture and 120 g in barn feeding. When grazing, considering mountainous pasture productivity it is necessary to increase the productivity through proper feeding. The feed costs of black goats raised by grazing on the grassland in the same period showed an average 75% reduction compared to barn feeding. As a result of this study, it can be expected that a considerable reduction of feed costs can be expected in the breeding of Korean native black goat using the mountain pasture.

• Journal of Welding and Joining
• /
• 제31권3호
• /
• pp.39-43
• /
• 2013

It is difficult to feed welding wire stably, when the distance between welding wire feeder and welding torch is far enough. In order to solve this problem, arranging a extension wire feeder between them could be one of useful methods. However, the welding wire could be twisted up in the extension cable between extension and terminal wire feeders in the case that RPM of extension wire feeding motor is higher than that of terminal motor. In this study, feeding problem of normal push-pull wire feeding system occurred at low welding current range less than 250A. In order to solve the problem, two new wire feeding systems of push-pull type were introduced. Welding wire feeding tests were preformed in the range of 150A to 400A with the developed push-pull feeding system. In addition, weldability test was performed at the welding current of 200A, 300A, and 400A. The welding wire twisting problem that was observed in the normal feeding system did not occur in the new push-pull wire feeding system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.937-940
• /
• 1992

A cost-saving feeding rate contro method for a batch reaction process is proposed by reconfigurating the flow rate control loop where the feeding rate is estimated by differentiating weight measurement. While the existing control methods require either a flow rate measurement device or a flow rate estimator, the proposed method is devised not to require neither of these facilities by directly controlling the tank weight with a time-varying set point. Experimental evaluation in a pilot-scale unit shows that the proposed method can significantly reduce the actuator hunting of the existing method where the flow rate is estimated by differentiating the weight measurement.

• 보건교육건강증진학회지
• /
• 제17권1호
• /
• pp.61-79
• /
• 2000

This study to study and analyze the current state of infancy breast-feeding ＆ practice and related factors and to provide basic data for the effective practice of breast-feeding and breast-feeding percentage improvement. For the object, 474 mothers of the infants who were born between Jan. 1, 1998 and Dec. 31, 1998 were selected, and the survey period ＆ method were from Oct. 15, 1999 through Nov. 14, 1999 (1 month period) and telephone interview, respectively. To examine by month breast-feeding type, the average breast-feeding percentage in 1 month after a child's birth was 42.4%, but after 6 month it decreased to 23.0%. To see breast-feeding percentage by academic background, the breast-feeding of elementary school graduated mothers was 33.3%, which was highest, and it decreased as the academic background of mothers went better (p〈0.01). By employment state, the percentage for the mothers who were not employed was higher (24.6%) than that of those who were employed at the time, which was 8.0% (p〈0.001). There was no meaningful difference found in breast-feeding percentage by infant mothers age, delivery place, infant sex, child order in family, weight at the time of birth. To examine breast-feeding percentage by delivery method, natural delivery was 27.0% which was higher than 13.1% of Caesarean section (p〈0.01), and by breast-feeding experience before leaving the hospital, 35.6% of those who have breast-fed were breast-feeding while it was 16.4% for those who never did it while in the hospital (p〈0.001). After conducting logistics multi return analysis having breast-feeding percentage as a variable at the time of 6 months after babys birth, I found that infant mothers employment state, delivery method, and breast-feeding experience before leaving the hospital become meaningful variables. As unemployed mothers (p〈0.05), as chose natural delivery (p〈0.05), as experienced breast-feeding before leaving the hospital (p〈0.001), there was more tendency to do breast-feeding. Summing the above results, I would like to suggest the following to raise breast-feeding percentage. Firstly, systematic education about the importance and advantages of breast-feeding and correct breast-feeding method should be practised for women. Secondly, vacation before and after childbirth for working women should be practised and the support of systems for working womens breast-feeding such as installation of nursery in work place are needed. Thirdly, continuous publicity and education for natural delivery inducement is necessary, and for the ones who chose Caesarean section, recommendation of breast-feeding is also needed. Fourth, for breast-feeding within fastest time after delivery, rooming-in required and legal and systematic support is also needed. Lastly, in the governmental level, publicity for breast-feeding and breast-feeding recommending programs that promotes 10 rules for successful breast-feeding bringing-up, provided by UNISEF and WHO, are to be provided.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.495-498
• /
• 2002

This article deals with the introduction of longitudinal instability of liquid rocket (pogo) and the analytical results on the frequency responses of KSR-III propulsion feeding system. Both the stiffness of bellows and the cavitation volume of venturi affect the frequency response of the feeding system. Especially, bellows has a great roll to reduce the natural frequency of the feeding system. Also, oxidizer and fuel feeding systems of the KSR-III have natural frequencies of ${\~}280Hz\;and\;{\~}90Hz$, respectively.

• 한국ITS학회:학술대회논문집
• /
• 한국ITS학회 2006년도 제5회 추계학술대회 및 정기총회
• /
• pp.171-174
• /
• 2006

• 한국기계가공학회지
• /
• 제17권1호
• /
• pp.23-33
• /
• 2018

In the general manual feeder of an LED lighting assembly system, many workers are needed to supply parts to the main conveyor. The automatic feeder for modern automation lighting assembly systems consists of a completely automated feeding system and a magazine system that supplies the parts automatically. A standardized LED panel and diffusion cover is stacked in the cartridge of the magazine system. The structural safety of the automatic feeding system with regard to handling the load from the panels and covers stored in the cartridge should be guaranteed. LED convergency lighting modules are assembled using two LED panels and one diffusion cover in an automatic feeder. In this study, the structural safety and fatigue life of the automatic feeder and magazine were analyzed by considering the load generated in the automatically assembled LED convergency lighting system. In addition, the dynamic behavior of each auto-feeding system and magazine delivery system was visualized, and the working process was evaluated via dynamic simulation using a virtual engineering method. A tack time table for automatic feeding systems was derived by developing a virtual prototype.

• 한국정밀공학회지
• /
• 제24권9호
• /
• pp.86-94
• /
• 2007

The design process must be planned carefully and executed systematically in order to support designers who are faced with many engineering design problems. In particular, conceptual design stage is very important than other stages such as detailed design or manufacturing stage on designing engineering systems. When designers are faced contradictory situation in task, conceptual design usually requires inventive thinking which depends on their creativity. And in order to develop good concepts, it is necessary to resolve contradictory situations during conceptual design. This paper presents a structure of systematic conceptual design process for designing engineering systems. And we developed the automatic feeding screw device using the proposed design process structure.

• Animal cells and systems
• /
• 제14권2호
• /
• pp.125-128
• /
• 2010

This study investigated the effect of different light intensities on first feeding of chub mackerel Scomber japonicus larvae. Fertilized eggs, obtained from LHRHa-induced spawning of captive broodstock, were stocked (60 larvae/l) into twelve 30-1 aquaria under light intensities of 0, 100, 200, 500 and 1000 lx, with three replicate aquaria per treatment. Temperature was maintained at $20^{\circ}C$ and salinity was 35 psu. Larvae were fed the rotifer Brachionus rotundiformis at a density of five rotifers/ml. Feeding incidence was measured as the percentage of larvae with prey in the digestive tract. Feeding intensity was evaluated as the number of prey in the digestive tract of the larvae. Larvae fed in darkness (0 lx) had significantly lower (P < 0.05) feeding incidence ($13{\pm}0.05%$ larvae with prey) and feeding intensity ($1.00{\pm}0.05$ rotifers per larva) than those larvae fed at 100 ($30{\pm}0.07%$, $1.17{\pm}0.09$ rotifers per larva), 200 ($43{\pm}0.08%$, $1.24{\pm}0.11$ rotifers larvae$^{-1}$), 500 ($53{\pm}0.08%$, $1.48{\pm}0.14$ rotifers per larva) and 1000 lx ($60{\pm}0.08%$, $1.38{\pm}0.13$ rotifers per larva). The feeding incidence of S. japonicus larvae increased with light intensity while feeding intensity showed no significant difference (P > 0.05) between light treatments.

• Journal of Biosystems Engineering
• /
• 제38권4호
• /
• pp.295-305
• /
• 2013

Purpose: Recent research showed that total mixed ration (TMR) feeding for pigs improved the productivity and reduced feed cost and manure odor. An automatic TMR feeding system was developed for this study because the conventional feeder cannot deliver the TMR containing roughage. Methods: Conventional feeding systems and physical properties of TMR were surveyed, and performance tests of the conventional feeder were conducted to develop a TMR feeder. Based on the TMR feeder was developed and installed, driving, measuring weight, radio frequency identification (RFID) reading, and discharging test for feeding were conducted to ensure the performance. Results: Moisture content, density, and angle of repose of the TMR 1 (mixture of 30% cut IRG silage and 70% concentrates) were 31.6%, 387 $kg/m^3$, and $51^{\circ}$, respectively. Moisture content, density, and angle of repose of the TMR 2 (mixture of 45% concentrates, 30% cut IRG silage and by-products, 10% bean curd refuse, 10% others, and 5% fermenter) were 22.2%, 544 $kg/m^3$, and $50^{\circ}$, respectively. The coefficient of variation (C.V.) of conventional concentrate feeding were 1.9~4.1%, and C.V. of TMR containing 1~3% cut IRG roughage feeding by conventional feeder were 9~42%. The conventional disc type feeder was not suitable for TMR feeding because the supply unit was clogged. The C.V. of TMR 1 was 0.6~7.9% when 0.5~10 kg of the TMR supplied, and it was suitable for feeding grow-finish pigs and sows. On the contrary, the C.V. with TMR 2 was 28% when 0.5 kg of the TMR supplied, and it was not suitable for feeding sows. Conclusions: The TMR feeder developed in this study was suitable for feeding grow-finish pigs because the feeder performed stably with over 5.0 kg feed. However, the feeder showed a lack of accuracy for feeding sows because the amount of each feed was more than 0.5 kg per a feeding. Therefore, the improvement of outlet structure for accurate feeding is needed for sow feeding.