• 한국물환경학회지
• /
• 제26권2호
• /
• pp.289-296
• /
• 2010

The purpose of this study is to evaluate various pre-treatment methods and proprieties of water quality for wastewater reuse using reverse osmosis (RO) processes. Secondary effluents were sampled from wastewater treatment plants and lab scale pre-treatments and RO filtration test were conducted systematically. Specifically, different types of pre-treatments, such as coagulation, microfiltration and ultrafiltration, were employed to evaluate the removal efficiency of particle and organic matters which may affect the membrane fouling rate. RO process was later added to eliminate trace amounts of remaining organic matters and salt from the raw water for wastewater reclamation. The permeate through the RO process satisfied water quality regulations for industrial water uses. The experimental results showed that the initial fouling tendency differed not only by the feed water properties but also by the membrane characteristics. Membrane fouling was greater for the membranes with large surface roughness, regardless of the hydrophobicity and zeta potentials. Thus both careful consideration of pre-treatment options and proper selection of RO membrane are of paramount importance for an efficient operation of wastewater treatment.

• 자원리싸이클링
• /
• 제18권2호
• /
• pp.16-29
• /
• 2009

본고는 펄프 제지산업 폐수에 함유된 오염물질들의 특성과 생물학적 처리기술들에 대해 설명한다. 펄프 제지산업 폐수는 고농도의 생화학적 산소요구량 (BOD)과 화학적 산소요구량 (COD)을 포함하고 높은 독성을 보이며 강한 흑갈색을 띠는 것이 특징이다. 특히, 펄프의 표백공정에서 리그닌의 염소화에 의해 다이옥신, 퓨란과 같은 독성의 유기염소화합물이 형성된다는 것이 알려져있다. 이에 따라 최근 펄프 제지산업은 기존의 표백처리를 무염소공정(TCF)으로 대체하고 있다. 펄프 제지산업 폐수처리에 사용되는 모든 생물학적 기술들은 폐수와 박테리아의 접촉 메커니즘에 기반을 두고 있는데, 이것은 박테리아가 폐수 내 유기물질을 먹이로 이용하여 세포로 전환함으로써 폐수 내 BOD농도를 감소시키는 것이다. 펄프 제지산업 폐수의 생물학적 처리에서 호기성 처리와 혐기성 처리 모두 효과적인 것으로 밝혀졌다. 뿐만 아니라, 최근 곰팡이류를 이용한 생물학적 처리, 생물-응집-여과기법을 혼용한 처리 등도 폐수처리분야에 새롭게 적용되었다. 이러한 기술들로 처리된 폐수를 펄프 제지공정에 재활용함으로써 제조공정의 물소비량을 상당히 감소시킬 수 있다.

• 상하수도학회지
• /
• 제25권6호
• /
• pp.917-922
• /
• 2011

Adsorption characteristics of boron on activated carbon was investigated in order to evaluate the use of activated carbon for the removal of boron in desalination processes using SWRO. Boron was removed ranging from 54~60% when the concentration of activated carbon was 1,000 mg/L in 6 hours under the initial boron concentration of 5 mg/L. The removal of boron increased by 20~22% with the increase of pH from 5 to 9. Organic matter had adverse effect on the adsorption of boron on activated carbon. Boron removal decreased by 10-12% when EDTA was added at 1 mg/L under 5 mg/L of boron and 200mg/L of activated carbon. In this results, activated carbon would be a good candidate for a pretreatment of desalination processes by SWRO from the view of mitigating the feed boron concentration to RO and meeting the effluent boron concentration without post-treatment after RO.

• 한국환경보건학회지
• /
• 제19권3호
• /
• pp.17-21
• /
• 1993

Characteristics of a downflow anaerobic packed bed reactor with raschig ring ceramics as a packing were measured and discussed for the basic evaluation of the process. A synthesized glucose substrate wastewater were used as a feed and process characteristics such as pH, biogas production, composition of produced gas, COD removal and VSS were measured with the hydraulic retention time (HRT) changing from 0.25 to 2 days. As a result, this type of reactor was applicable in continuous operation within the given HRT range and the transient period approaching the steady state was about 20 days. The content of methane in produced gas increase with HRT was always high above 50% enough to use as energy source. The COD removal efficiency increased gradually as HRT increased. The axial profile of VSS concentration in the reactor usually showed the maximum at the lower region and the minimum at the middle. The VSS concentration at the upper region and the exit appeared similarly. However, at 0.25 day of HRT, the VSS concentration of effluent became higher than that of the upper region. Therefore the optimum HRT of this reactor occurred about 0.5 day, at which the production of methane began to be just stabilized and loss of VSS and COD removal were resonable.

• Fisheries and Aquatic Sciences
• /
• 제24권12호
• /
• pp.394-399
• /
• 2021

Song-Gang^® bio-stone (SGS) is a microporous crystalline hydrated aluminosilicate which has found various applications because of their very unique physiochemical characteristics such as ion exchange and absorptive-desorptive properties. Significant progress has been made in recent years on applications of these inorganic adsorbents in different industries including agriculture, aquaculture, water and wastewater treatment. This review article intends to summarize the published reports on the applications of SGS in aquaculture industry. SGS application as a feed additive to enhance fish growth and promote their health and nutritional parameters is the most important discussed areas. According to the technical data that are discussed in this review, SGS should be considered as a material with tremendous potential for application in the aquaculture industry. Considerable amounts of research works are under way to explore other opportunities for application of SGS to benefit aquaculture industry.

• 상하수도학회지
• /
• 제7권1호
• /
• pp.46-53
• /
• 1993

This study was carried out to examine substrate removal characteristics with the variation of the hydraulic retention time in an anaerobic filter. The feed concentration of synthetic wastewater used in the experiment was $10,000mg/l$ glucose. As media, the porosity of volcanic stones in Jeju island were 76%. The conditions of the experiment were as follows; HRT ranging from 1 day to 3 day, loading rates ranging from 3.33kg $COD_{er}/void\;m^3.day$ to 10kg $COD_{er}/void\;m^3.day$ and a temperature $35^{\circ}C$. Based on the results of the experiments, the COD removal efficiency was 98~99% in $COD_{er}$ method with loading rates ranging from 3.33kgCOD/void $m^3.day$ to 10kg COD/void $m^3.day$ and HRT ranging from 1day to 3 day. The produced quantity of gas equivalant to a porosity volume was $1.332~3.756Nm^3/void\;m^3.day$. The relationship between $COD_{er}$ loading rates and gas produced quantity equivalant to a porosity volume was well fitted with the equation of $Nm^3/void\;m^3.day{\cdot}=0.359L_0+0.179$($L_0=COD$ loading rate). Judging from the removal efficiency in this experiment, We concluded that anaerobic filter using Volcanic stones is one of improved and effective. As media, practical value of volcanic stones is sufficient.

• 상하수도학회지
• /
• 제24권6호
• /
• pp.735-741
• /
• 2010

A pilot test was carried out to investigate the long term operation characteristics of Microfiltration (MF) system as a pretreatment for seawater reverse osmosis (SWRO) processes for two years. A commercialized MF module with pressurized operation type was used to filter seawater to remove particles which can foul reverse osmosis (RO) membrane. Silt Density Index (SDI) values of filtered seawater by the MF system were ranged from 0.14 to 1.79, which meet the SDI standard for RO feed water as depicted in previous literatures. Although the tested seawater is quite clean (i.e., dissolved organic cabon (DOC) concentration and turbidity were about 1 mg/l and less than 1 NTU, respectively) enough not to foul the MF membrane, steep increase in trans-membrane pressure (TMP) with a constant flux were observed over a whole operation period. A set of operation and water analysis data implies that the steep increase in TMP was resulted from iron and maganese fouling by the combination of metal corrosion by seawater and oxidation state by aeration and residual chlorine.

• 상하수도학회지
• /
• 제8권1호
• /
• pp.1-8
• /
• 1994

Laboratory experiments were conducted to investigate the effect of digestion temperature on the settleability and dewaterability of anaerobically digested sludge. The digesters were operated at a hydraulic retention time of 20 days with a loading rate of 0.63~0.66kg volatile solids per cubic meter per day at the temperature of $35^{\circ}C$ and $55^{\circ}C$. A mixed primary and secondary municipal sludge was used as a feed. The interface height of the sludge during settling test was recorded to identify settleability. As a measure of dewaterability of the sludge, specific resistance and capillary suction time were also measured with and without chemical conditioning. Higher digestion efficiency was obtained at $55^{\circ}C$ than $35^{\circ}C$. However, the settleability and dewaterability of the sludge at $35^{\circ}C$ were quite higher than those of the sludge digested at $55^{\circ}C$. The optimum dosages of ferric chloride for sludge conditioning were 0.4% and 0.6% at $35^{\circ}C$ and $55^{\circ}C$, respectively. The filtrate COD of the sludge digested at $55^{\circ}C$ was higher than at $35^{\circ}C$, which means that poor dewaterability of the sludge result in high filtrate COD.

• 상하수도학회지
• /
• 제20권5호
• /
• pp.747-753
• /
• 2006

Air flotation is a solid-liquid separation process that utilizes up-flow microbubbles to thicken activated sludge and enhance clarification efficiency. Continuous air flotation experiments were performed to investigate the effect of operation parameters such as initial MLSS (mixed liquor suspended solid) concentration, air pressure, surface loading rate, air to solid (A/S) ratio, and flotation time on thickening efficiency. An initial activated sludge concentration ranged from 3,000 to 12,000mgSS/L and thickened sludge concentration varied from 6,400 to 28,100mgSS/L. The result showed that the thickening efficiency was mainly dependent on surface loading rate, A/S ratio, and flotation time. The pressure did not affect the thickening efficiency when it kept in the range of 1.6 to 1.8 bar. Experimental results showed that the thickening efficiency of activated sludge was increased only when the feed sludge concentration exceeded 5,000mgSS/L and the thickened concentration was over 20,000mgSS/L. At this time, SS concentration in the clarified liquid was ranged from 5 to 10mg/L.

• 상하수도학회지
• /
• 제27권6호
• /
• pp.743-750
• /
• 2013

In this study, the carbonized aggregate of light weight and high mechanical strength using sewage sludge was evaluated with changing carbonation variables of temperature, detention time and feed condition. Porosity and mechanical strength was simultaneously increased according to increase of carbonization temperature unexpectedly. Carbonization detention time above 1 hour nearly affect on the porosity, but mainly on mechanical strength of the carbonized aggregate in case of clay addition. On $900^{\circ}C$, porosity and mechanical strength was increased rapidly, but above $1000^{\circ}C$, porosity began to decrease. Clay addition was very effective on increase of mechanical strength following much loss in porosity. The carbonized aggregate manufactured at $900^{\circ}C$ adding 30 % clay in sewage sludge was higher a little in porosity and 3 times in mechanical strength than those at $700^{\circ}C$ not adding clay. Consequently, in manufacturing the carbonized aggregate having simultaneously high porosity and mechanical strength, it is desirable to have operational condition of $900{\sim}1000^{\circ}C$ temperature and 1 hour time, and clay addition within 30 % for further higher mechanical strength.