• The KSFM Journal of Fluid Machinery
• /
• v.7 no.6 s.27
• /
• pp.55-61
• /
• 2004

A numerical procedure for optimizing the shape of three-dimensional sedimentation tank is presented to maximize its sedimentation efficiency. The response surface based optimization is used as an optimization technique with Reynolds-averaged Navier-Stokes analysis for multi-phase flow. Standard $k-{\epsilon}$ model is used as a turbulence closure. Three design variables such as, tank height to center feed wall diameter ratio, blockage ratio of center feed wall and angle of distributor are chosen as design variables. Sedimentation efficiency is defined as an objective function. Full-factorial method is used to determine the training points as a means of design of experiment. Sensitivity of each design variable on the objective function has been evaluated. And, optimal values of the design variables have been obtained.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.9
• /
• pp.1282-1289
• /
• 2001

One feeding trial and two metabolic trials were conducted to investigate the effects of lysine to protein ratio in practical swine diets on growth performance and efficiency of nitrogen retention and utilization in different growing phases. In Trial one (the feeding trial), 90 mixed sex pigs weighing $9.1{\pm}1.4kg$ (Duroc ${\times}$ Landrance ${\times}$ Beijing Black) were used to study the effects of concentrations of 5.2, 5.3, 5.8, 6.4 and 7.2 g lysine/100 g CP in diets containing 1.2% lysine on growth performance and serum urea nitrogen. The results showed that feed conversion efficiency and economic efficiency were best for pigs fed the diet containing the lysine concentration of 5.8 g /100 g crude protein. Serum urea nitrogen concentration decreased linearly (p=0.0009) and serum free lysine content increased linearly (p=0.0017) as the lysine to protein ratio in diets increased from 5.2 to 7.2 g/100 g. In Trials two and three (the metabolic trials), five growing barrows (Duroc ${\times}$ Landrance ${\times}$ Beijing black), with initial body weights of approximately $26{\pm}2.4kg$ and $56.3{\pm}3.5kg$, respectively, were allotted to five dietary treatments according to a $5{\times}5$ Latin square design. Trial two contained 5.2, 5.7, 6.1, 6.7 and 6.8 g lysine/100 g CP treatments. Trial three contained 4.6, 5.0, 5.6, 6.1 and 6.6 g lysine/100 g CP treatments. The results showed that nitrogen retention in growing pigs decreased linearly (p=0.0011 in Trial two; p=0.0099 in Trial three) as the lysine to protein ratio in diets increased. The ratio of lysine to protein in diets resulting in maximum nitrogen retention was 5.2 g/100 g and 5.0 g/100 g in Trial two and Trial three, respectively. In Trial two, apparent biological value and gross nitrogen efficiency increased linearly (p=0.0135 and p=0.0192, respectively) as the lysine to protein ratio increased from 5.2 to 6.8 g lysine/100 g CP. In summary, we concluded that the optimal Lysine to Protein Ratios for 8-20 kg and 20-80 kg pigs were 5.8 g/100 g and 5.0 to 5.2 g/100 g, respectively.

• 유체기계공업학회:학술대회논문집
• /
• 2002.12a
• /
• pp.425-432
• /
• 2002

Both numerical and experimental studies on sedimentation efficiency of a sedimentation bed were carried out. Three different structures of sedimentation bed and five different combinations of blockage ratio of center feed wall and angle of distributor are implemented to find the optimal values of geometric parameters. The effect of rotation of the distributor on sedimentation efficiency is also investigated. It reveals that the effect of blockage ratio and angle of distributor on sedimentation efficiency is considerable, while rotation effect can be neglected, and that calculated efficiencies show good agreements with those of experiment, qualitatively.

• The KSFM Journal of Fluid Machinery
• /
• v.6 no.2 s.19
• /
• pp.54-61
• /
• 2003

Both numerical and experimental studies on the sedimentation efficiency of a sedimentation bed were carried out. Three different structures of sedimentation bed and five different combinations of blockage ratio of center feed wall and angle of distributor are implemented to find the optimal values of geometric parameters. The effect of rotation of the distributor on sedimentation efficiency is also investigated. It reveals that the effects of blockage ratio and angle of distributor on sedimentation efficiency are considerable, while rotation effect can be neglected, and that calculated efficiencies show good agreements with those of experiment, qualitatively.

• Membrane and Water Treatment
• /
• v.4 no.1
• /
• pp.11-25
• /
• 2013

Emulsion liquid membrane (ELM) process suffers from emulsion instability problem. So far, emulsion produced by mechanical methods such as stirrer and homogenizer has big size and high emulsion breakage. This paper discussed the application of emulsion produced by sonicator to extract cadmium in a batch ELM system. The emulsions consist of N,N-Dioctyl-1-octanamine (trioctylamine/TOA), nitrogen trihydride (ammonia/NH4OH), sorbitan monooleate (Span 80), and kerosene as carrier, stripping solution, emulsifying agent, and organic diluent, respectively. Effects of comprehensive parameters on extraction efficiency of Cd(II) such as emulsification time, extraction time, stirring speed, surfactant concentration, initial feed phase concentration, carrier concentration, volume ratio of the emulsion to feed phase, and pH of initial feed phase were evaluated. The results showed that extraction efficiencies of Cd(II) greater than 98% could be obtained under the following conditions: 15 minutes of emulsification time, 4 wt.% of Span 80 concentration, 4 wt.% of TOA concentration, 15 minutes of extraction time, 250 rpm of stirring speed, 100 ppm of initial feed concentration, volume ratio of emulsion to feed phase of 1:5, and initial feed pH of 1.53.

• Environmental Engineering Research
• /
• v.17 no.2
• /
• pp.89-94
• /
• 2012

Pyrolysis/gasification technology utilizes an energy conversion technique from various waste resources, such as biomass, solid waste, sewage sludge, and etc. to generating a syngas (synthesis gas). However, one of the major problems for the pyrolysis gasification is the presence of tar in the product gas. The tar produced might cause damages and operating problems on the facility. In this study, a gliding arc plasma reformer was developed to solve the previously acknowledged issues. An experiment was conducted using surrogate benzene and naphthalene, which are generated during the pyrolysis and/or gasification, as the representative tar substance. To identify the characteristics of the influential parameters of tar decomposition, tests were performed on the steam feed amount (steam/carbon ratio), input discharge power (specific energy input, SEI), total feed gas amount and the input tar concentration. In benzene, the optimal operating conditions of the gliding arc plasma 2 in steam to carbon (S/C) ratio, 0.98 $kWh/m^3$ in SEI, 14 L/min in total gas feed rate and 3.6% in benzene concentration. In naphthalene, 2.5 in S/C ratio, 1 $kWh/m^3$ in SEI, 18.4 L/min in total gas feed rate and 1% in naphthalene concentration. The benzene decomposition efficiency was 95%, and the energy efficiency was 120 g/kWh. The naphthalene decomposition efficiency was 79%, and the energy yield was 68 g/kWh.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.6
• /
• pp.825-831
• /
• 2012

The retrofitting of a thickening unit process is widely considered in municipal wastewater treatment plants in Korea to enhance the anaerobic digestion efficiency. The authors examined the effect of feed concentration (2-34.1 g VS/L) and feed to microorganism (F/M) ratio (0.50-1.35 g VS/g VS) on anaerobic batch digestion of sewage sludge. Methane yield over 90 mL $CH_4/g$ $VS_{feed}$ was found at a feed concentration in the range of 12-26 g VS/L and a F/M ratio below 0.6 g VS/g VS. A high F/M ratio decreased methane yield and rate with oragnic acid accumulation. As sudden increase of sewage sludge concentration prior to anaerobic digestion would jeopardize the digester performance due to the rasied F/M ratio, gradual increase of the sludge feed concentration or an additional biomass retention in the digester is recommended.

• Journal of Nutrition and Health
• /
• v.8 no.2
• /
• pp.7-13
• /
• 1975

In the classic point of view, it has well known that the tangle is the mineral source, especially iodide. However, there are few reports that the tangle can be used the high-protein source. With the consideration whether the tangle can be used as a protein source as well as one of the foodstuff or not, this studies is done by animal experiment. The Albino rats to be examined were fed on the basal diet (Table 1) and the others including the polished tangle by weight 2%, 3%, 4% and 5%, as experimental diets, for 4 weeks, respectively. The weight gain(Fig. 1), total amount of diet intake (Fig. 2), total water intake(Fig. 3), feed efficiency ratio (Fig. 4) and protein efficiency ratio (Fig. 5) was measured by each week, respectively. In addition, organ weight (Fig. 6) and blood study (Fig. 7, Fig. 8) was also analyzed at the end of the experiment. As the results of this study, growth rate, that is, weight gain, feed efficiency ratio and protein efficiency ratio in all experimental groups increased more than those of the control group. Moreover, it was also found that weight gain, feed efficiency ratio, protein efficiency ratio by feeding on the 2 percent tangle group was higher than the corresponding values of all experimental groups. However, feed intake and total water gain were the most by feeding on the 5% tangle group. This result may be interpreted to show that the total content of sodium includes more than enough in the feed intakes. To obtain further information concerning the effect of the tangle-dietary conditions on the growth rate of Albino rats, it was measured the organ weight. In the adrenal and spleen, the total weight by feeding on the all experimental groups were decreased more than that in the case of the control group. In the other hand, in the liver the weight by feeding on the high concentration groups (4%, 5% tangle diets) were not higher than the control group, while in the case of the low concentration groups (2%, 3% tangle diets) were higher than that of the control group. When it was observed the blood components, total protein, hemoglobin, sodium, potassium, white blood cell and red blood cell of rats, the content of white blood cell by feeding on all experimental groups were lower than that by feeding on the control group, but it was also clear that in the other components except white blood cell in blood the contents by feeding on all experimental groups were similar to that in the case of the control groups. However, in the 5% tangle group, the content of sodium was the lowest of all experimental groups, where as the content of potassium was the highest of all experimental groups.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.49 no.5
• /
• pp.607-611
• /
• 2016

This study was conducted to investigate the effects of different water temperatures on growth, survival, biochemical composition, and blood physiological parameters of juvenile mandarin fish Siniperca scherzeri. Feed-trained juvenile fish were subjected to four water temperatures (20, 23, 26 and 29℃) with two replicate groups. The fish were fed to apparent satiation twice daily using a formulated diet containing 55% crude protein and 6% crude lipid. After the 8-week feeding trial, survival was >96% in all groups. Weight gain and feed efficiency of fish reared at 26 and 29℃ were higher than those reared at 20℃. The protein efficiency ratio, daily feed intake, and whole body proximate composition were not affected by water temperature. These results indicate that a suitable water temperature range for optimal growth and feed efficiency of juvenile mandarin fish is 26-29℃ under these experimental conditions.

• Fisheries and Aquatic Sciences
• /
• v.24 no.6
• /
• pp.219-227
• /
• 2021

The effects of various feeding ratios on the growth, body composition, and blood chemistry of the juvenile mandarin fish Siniperca scherzeri (initial body weight 9.6 g) were examined in recirculating freshwater system equipped with 21, 300 L tanks at 20 fish per tank. The triplicate groups of seven feeding ratios treatments were prepared: 100% (control), 95%, 90%, 85%, 80%, 75%, and 70% of satiation. The feed amount of control group was determined by supplying with apparent satiation and then the feed amounts of the other six feeding groups were determined based on the feed amount of the control group. Fish were hand-fed with test diet (55.4% crude protein) for 10 weeks. Weight gain (WG) and specific growth rate of fish fed to 100% satiation were not significantly (p > 0.05) different from those of fish fed to ≥ 80% satiation but were significantly higher than those of fish fed to 75% and 70% satiation. Feed efficiency, protein efficiency ratio, and protein retention of 100% satiation were not significantly different from those of 95% and 90% satiation but were significantly (p <0.05) lower than ≤ 85% satiation. Condition factor, hepatosomatic index, and coefficient variation were not significantly (p > 0.05) affected by feeding ratio. Whole body composition and contents of hematocrit, glutamic oxaloacetic transaminase, glutamic pyruvic transaminase, glucose, total protein, and high-density lipoprotein cholesterol in blood serum were not significantly (p > 0.05) affected by the feeding ratio; however, content of total cholesterol tended to decrease as the feeding ratio decreased. Using broken-line analysis of WG, it was suggested that the optimum feeding ratio of juvenile mandarin fish, ranging from 9.0 g to 37.0 g, appeared to be 87.7% of satiation without growth inhibition.