• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.565-583
• /
• 1993

In order to reduce the production cost and improve the quality of dairy feed, several dairy feed mill model suitable for Korean farm size are developed. Also, capital requirement and operating costs of the model mill are analyzed. And these analyzed data are compared with the commercial feed production cost, in order to test whether the model mills are suitable or not in Korean dairy farm. Also optimum model is recommended depending on size of dairy farm. As a result, developed model mill(TMR) is very useful in Korea dairy farm not only reduce production cost up to 78% but also improve the qualities.

• Asian-Australasian Journal of Animal Sciences
• /
• v.4 no.2
• /
• pp.187-193
• /
• 1991

Almost 1/4 of all the coconuts in the world is produced in the Philippines. During periods of high supply of coconuts it would be better to feed coconut meat to farm animals for conversion into meat and eggs. Three studies were conducted at the Visayas State College of Agriculture, Baybay, Leyte, Philippines from April, 1983 to April, 1985 to determine the response of Mallard ducks, Muscovy ducks and broilers to fresh coconut meat supplementation in their diets. Results showed that Mallard ducks on ration with coconut meat performed similarly with those on ration without coconut meat. Feed cost per dozen eggs was reduced by 28-30% with coconut meat. Feed cost per unit gain of muscovy ducks was reduced by 32-37% by coconut meat supplementation. With broilers, feed conversion, gain in weight and breast weight were significantly improved by coconut meat supplementation. Return-above-feed cost increased with increasing level of coconut meat in the ration.

• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.6
• /
• pp.755-768
• /
• 1998

Nitrogen and phosphorus are major nutrients in animal feeds which partially remain in the environment as pollution. In addition, nitrogen and phosphorus along with energy are the main nutrients which determine the feed cost. Any decreases in the levels of these three nutrients can contribute to reducing the pollution problem as well as the cost of feed. The nutrient requirements for chickens in the work here reported should allow for the addition of mixed enzymes (phytases, proteases, glucanases, xylanases and others). Such minimal levels of crude protein in the research results which are here reported are 16% for 0-6 weeks of age, 13.5% for 7-12 weeks of age, 11.5% for 13-18 weeks of age for layer type chicks, 13% for layer, 18% for 0-3 weeks of age broiler and 16.5% for 4-7 weeks of age broiler. These research projects have been done without adding enzyme supplements to their experimental diets. The minimal values of phosphorus, shown as available phosphorus, are 0.25% for pullets, 0.09% for layers and 0.25% for broilers with the addition of phytase. The minimum energy requirement (metabolizable energy) for reducing the feed cost could be summarized as 2,750 kcal per kg feed for pullets, 2,800 kcal for layers and 2,700 kcal for broilers.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.5
• /
• pp.747-755
• /
• 2009

The feed resource for animals is a major cost determinant for profitability in livestock production enterprises, and thus any effort at improving the efficiency of feed use will help to reduce feed cost. Feed conversion ratio, expressed as feed inputs per unit output, is a traditional measure of efficiency that has significant phenotypic and genetic correlations with feed intake and growth traits. The use of ratio traits for genetic selection may cause problems associated with prediction of change in the component traits in future generations. Residual feed intake, a linear index, is a trait derived from the difference between actual feed intake and that predicted on the basis of the requirements for maintenance of body weight and production. Considerable genetic variation exists in residual feed intake for cattle and pigs, which should respond to selection. Phenotypic independence of phenotypic residual feed intake with body weight and weight gain can be obligatory. Genetic residual feed intake is genetically independent of its component traits (body weight and weight gain). Genetic correlations of residual feed intake with daily feed intake and feed conversion efficiency have been strong and positive in both cattle and pigs. Residual feed intake is favorably genetically correlated with eye muscle area and carcass weight in cattle and with eye muscle area and backfat in pigs. Selection to reduce residual feed intake (excessive intake of feed) will improve the efficiency of feed and most of the economically important carcass traits in cattle and pigs. Therefore, residual feed intake can be used to replace traditional feed conversion ratio as a selection criterion of feed efficiency in breeding programs. However, further studies are required on the variation of residual feed intake during different developmental stage of production.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.56 no.4
• /
• pp.373-379
• /
• 2023

The dietary inclusion of black soldier fly larvae meal Hermetia illucens (BSL) for starry flounder Platichthys stellatus was examined in a four-month trial at a Pohang fish farm. Two diets were prepared: a fish meal-based commercial diet (CD) and an experimental diet containing 7% BSL in the CD (BCD). Fish (average weight, 125.2 g) were reared in a square concrete tank (7×7 m) in triplicates. Feed efficiency was significantly higher in fish fed BCD compared to that of the fish fed CD. The DHA/EPA ratio in dorsal muscle was not significantly affected by the fatty acid composition of the experimental diets. Based on the growth performance, the feed cost for producing 1 kg of starry flounder was 1,797 won for CD and 1,814 won for BCD. With government subsidies the feed cost for producing 1 kg of starry flounder was 1,481 won for CD and 1,309 won for BCD. The results indicate that BSL can be included at 7% without adverse effects on growth performance, fillet composition, or feed cost. However, further research is needed to determine the optimum percentage of BSL as a replacement of FM in starry flounder diets.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.87-90
• /
• 2008

Levelized generation cost(LGC) has been widely used in assessing feed-in tariffs(FiT) for electricity generating from new and renewable energies. Current FiTs for renewable electricity in Korea have been fixed and applied with realistic economic data by the efforts of KERI(Korea Electrotechnology Research Institute) since October 2006. Some critical issues on the estimation of LGC are, however, found in KERI's report. Major issues are the estimation of capital cost, the consideration of corporate tax, and the application of economic life cycle in the formulae for LGC. These critical issues are examined and interpreted in a correct way in this paper.

• Korean Journal of Poultry Science
• /
• v.8 no.1
• /
• pp.25-30
• /
• 1981

This study was conducted to find the method that the least-cost formula can be determined thus allowing a better keeping of raw material supplies under the constraints having to be used some raw materials that are either in limited supply or for other reason in restricted use. In this study, it was considered that three kinds of feed were produced under limited supply of six kinds of raw materials, and data for the analysis were collected from a feed mill in southern part of Korea. According to the result of this study, it was proved better to determine the least-cost formula as the multi-mix problem than as the simple least-cost problem when more than two kinds of feed were produced wilt limited supply of raw materials.

• Korean Journal of Poultry Science
• /
• v.23 no.1
• /
• pp.27-37
• /
• 1996

This experiment was carried out to study the effects of feeding split diets for a.m. and p.m. on laying hen performance and feed cost with 480 ISA Brown layers for three periods during 32∼36, 52∼56 and 72∼76 wk of age, respectively. The control group(C) was fed a conventional single diet throughout the day and split diet groups (T$_1$, T$_2$, T$_3$, T$_4$ and T$\_$5/) were offered high energy-high protein-low Ca diets, and low energy-low protein-high Ca diets in a.m. and p.m., respectively. In split diet groups, feed intake, ME and CP consumption, and feed cost were significantly reduced(P<0.05) compared to the C, while the hen-day egg production was significantly improved. However, the average egg weight was not influenced by the feeding system. Due to the reduced daily feed, ME, and CP intakes, and the improved egg production, the conversions of feed, ME, CP, and feed cost required per kg egg mass were also significantly improved (P<0.05) in splits diet groups. Among split diet groups, the T$_2$ group fed the diet devoid of Ca supplement from the conventional laying hen diet in a.m., and the diet containing the Ca supplement 2 times the conventional diet in p.m., was superior in conversion of nutrients and feed cost per kg egg mass to the other split diet groups. It was concluded that daily feed and nutrients cousumption and daily feed cost could be reduced 5∼6％ while hen-day egg production could be improved about 4％, so that about 10％ of the feed and nutrients and feed cost per kg egg mass could be spared by introducing the split diet feeding for a.m. and p.m. based on T$_2$ treatment in laying hens.

• Journal of the korean Society of Automotive Engineers
• /
• v.14 no.6
• /
• pp.113-126
• /
• 1992

Recently the multi-kind, small-amount manufacturing system has been replacing the mass manufacturing system, and domestic machining inustry also is eager to absorb the new technology because of its high productivity and cost reduction. The optimization of the cutting condition has been a vital problem in the machining industry, which would help increase the productivity and raise the international competitiveness. It is intended in this study to investigate the machining costs per unit time which is essential to the analysis of the optimal cutting condition, to computer the cutting speed that lead to the minimum machining costs and the maximum production to suggest the cutting speed range that enables efficient speed cutting, and to review the machining economy in relation to cutting depth and feed. Also considered are the optimal cutting speed and prodution rated in rrelation with feed. It is found that the minimum-cost cutting speed increases and the efficient cutting speed range is reduced as machining cost per unit time increases since the cutting speed for maximum production remains almost constant. The machining cost is also lowered and the production rate increases as the feed increases, and the feed should be selected to satisfy the required surface roughness. The machining cost and production rate are hardly affected by the cutting depth if the cutting speed stays below 100m/min, however, they are subject to change at larger cutting depth and the high-efficient speed range also is restricted. It can be established an adaptive optimal cutting conditions can be established in workshop by the auto-selection progam for optimal operation. It is expected that this method for choosing the optimal cutting conditions might contribute to the improvement of the productivity and reduced the cost. It is highly recommended to prepare the optimal cutting conditionthus obtained for future use in the programing of G-function of CNC machines. If proper programs that automatically select the optimal cutting conditions should be developed, it would be helpful to the works being done in the machine shops and would result in noticeable production raise and cost reduction.

• Korean Journal of Poultry Science
• /
• v.29 no.3
• /
• pp.195-204
• /
• 2002

Two experiments were conducted to study the effects of nutrient level and feeding method of split diets for a.m. and p.m. on laying hen performance, feed cost and eggshell quality. In experiment 1, 384 ISA Brown layers of 30∼38wk of age were assigned to four treatments which comprise of three replicates each containing 32 birds. The control(C) was fed a conventional single diet throughout the day and split diet groups(T1, T2 and T3) were offered high energy/protein-low Ca diets, and low energy/protein-high Ca diets in a.m.(04:00∼15:00) and p.m.(15:00∼21:00), respectively. In the split diet groups, daily ME and CP consumption, and feed cost were significantly reduced(P<0.05) compared to the C, while the hen-day egg production, average egg weight and daily feed intake were not different among treatments. Due to the reduced daily ME and CP intakes and feed cost, the conversions of feed, ME, CP and feed cost required per day and per kg egg mass were also significantly improved(P<0.05) in the split diet groups. Eggshell qualities (egg specific gravity, egg breaking strength and eggshell thickness) were improved(P<0.05) by split diet feeding. As the Ca level of the p.m. diet increased. In Experiment 2, 384 ISA Brown layers of 50∼58 wk of age were used in three treatments and each treatment was represented by four replicates each containing 32 birds. The control(C) was fed a conventional single diet throughout the day and split diet group(T1) was offered high energy/protein-low Ca diets, and low energy/protein-high Ca diets in a.m.(04:00∼l5:00) and p.m.(15:00∼21:00), respectively. T2 group was fed the diet mixed (50:50) with the a.m. diets in mash and p.m. diet in pellet used T1 group. In T1 and T2 groups, daily feed intake and average egg weight were significantly reduced(P<0.05) compared to the C, while the hen-day egg production was not influenced by the feeding system. Daily ME and CP consumption, and feed cost were reduced(p.0.05), and the conversions of ME, CP and feed cost required per egg were also significantly improved(P<0.05) in T1 and T2, while the conversions of feed, ME, CP and feed cost required per kg egg mass were not different to the C. Eggshell qualities of T1 and T2 were improved(P<0.05) compared to the others. It was concluded the feed and nutrients consumption, feed cost per day or per kg egg mass could be reduced by introducing split diets for a.m. and p.m. and the feeding method of mixed diet of split diets were also convenient and effective for sparing feed cost and improvement of eggshell quality.