• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.4
• /
• pp.506-511
• /
• 2004

Biometrics is getting more and more attention in recent years for security and other concerns. So far, only fingerprint recognition has seen limited success for on-line security check, since other biometrics verification and identification systems require more complicated and expensive acquisition interfaces and recognition processes. Hand-Geometry has been used for biometric verification and identification because of its acquisition convenience and good performance for verification and identification performance. Hence, it can be a good candidate for online checks. Therefore, this paper proposes a Hand-Geometry recognition system based on geometrical features of hand. From anatomical point of view, human hand can be characterized by its length, width, thickness, geometrical composition, shapes of the palm, and shape and geometry of the fingers. This paper proposes thirty relevant features for a Hand-Geometry recognition system. However, during experimentation, it was discovered that length measured from the tip of the finger was not a reliable feature. Hence, we propose a new technique based on Genetic Algorithm for extraction of the center of nail bottom, in order to use it for the length feature.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.702-706
• /
• 1995

Integration of CAM and CAM information is important in the CIM era. For a CIM system, the feature representation can be a solution to the integration of product model data. These are geometry feature, functional feature, and manufacturing feature in the feature context. This paper proposes a framework to integrate the configuration design method, parametric modeling and the feature modeling method. The concept of design unit which is one level higher than functional feature and parametric modeling concept with functional features have been proposed.

• Journal of the Korea Computer Graphics Society
• /
• v.23 no.1
• /
• pp.57-65
• /
• 2017

In this paper, we present a dictionary learning method for reducing errors in point cloud models and reconstructing their geometry. For this, 3D feature information is extracted from the models which have a similar shape characteristic as the target model. Then a dictionary is constructed and the geometry is reconstructed using the dictionary. The presented method in this paper consists of the following three steps. First, a geometric patch is constructed from a similar model. Second, a morphological 3D feature of the acquired patch is learned. Third, a geometry reconstruction is performed using the learned dictionary. Finally, the error between the original model and the reconstruction result is calculated, and the accuracy of the reconstruction result is checked.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.4
• /
• pp.1721-1737
• /
• 2020

Human apparent age estimation has become a popular research topic and attracted great attention in recent years due to its wide applications, such as personal security and law enforcement. To achieve the goal of age estimation, a large number of methods have been pro-posed, where the models derived through the cumulative attribute coding achieve promised performance by preserving the neighbor-similarity of ages. However, these methods afore-mentioned ignore the geometric structure of extracted facial features. Indeed, the geometric structure of data greatly affects the accuracy of prediction. To this end, we propose an age estimation algorithm through joint feature selection and manifold learning paradigms, so-called Feature-selected and Geometry-preserved Least Square Regression (FGLSR). Based on this, our proposed method, compared with the others, not only preserves the geometry structures within facial representations, but also selects the discriminative features. Moreover, a deep learning extension based FGLSR is proposed later, namely Feature selected and Geometry preserved Neural Network (FGNN). Finally, related experiments are conducted on Morph2 and FG-Net datasets for FGLSR and on Morph2 datasets for FGNN. Experimental results testify our method achieve the best performances.

• Korean Journal of Computational Design and Engineering
• /
• v.1 no.2
• /
• pp.122-132
• /
• 1996

Features are generic shapes with which engineers associate certain attributes and knowledge useful in reasoning about the product. Feature-based modeling systems support additional levels of information beyond those available in geometric modelers. The objective of this study is to develop a PC level feature-based modeling system which explicitly represents dimensions of the part. The feature-based modeler retains all the benefits of traditional B-rep. solid models, and represents the dimensions at a high level of a abstraction so that dimension driven geometry can be achieved.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.737-742
• /
• 1994

In this paper , we propose an incremental approach for recognizing a class of machining features from a featurebased design model as a part design proceeds, utilizing various information such as nominal geometry, design intents, and design feature characteristics. The proposed apptroach can handle complex intersecting features and protrusion features designed on oblique faces. The class of recognized volumetric machining features can be expressed as Material Removal Shape Element Volumes (MRSEVs), a PDES/STEP-based library of machining features.

• Korean Journal of Computational Design and Engineering
• /
• v.4 no.2
• /
• pp.139-152
• /
• 1999

This paper presents a feature-based approach to extracting machining features fro a feature-based design model. In the approach, a design feature to machining feature conversion process incrementally converts each added design feature into a machining feature or a set of machining features. The proposed approach an efficiently handle protrusion features and interacting features since it takes advantage of design feature information, design intent, and functional requirements during feature extraction. Protrusion features cannot be directly mapped into machining features so that the removal volumes surrounding protrusion features are extracted and converted it no machining features. By utilizing feature information as well as geometry information during feature extraction, the proposed approach can easily overcome inherent problems relating to feature recognition such as feature interactions and loss of design intent. In addition, a feature extraction process can be simplified, and a large set of complex part can be handled with ease.

• ETRI Journal
• /
• v.44 no.1
• /
• pp.38-50
• /
• 2022

This paper presents a study on the use of encoder-derived features in decoder-side depth estimation. The scheme of multiview video encoding does not require the transmission of depth maps (which carry the geometry of a three-dimensional scene) as only a set of input views and their parameters are compressed and packed into the bitstream, with a set of features that could make it easier to estimate geometry in the decoder. The paper proposes novel recursive block splitting for the feature extraction process and evaluates different scenarios of feature-driven decoder-side depth estimation, performed by assessing their influence on the bitrate of metadata, quality of the reconstructed video, and time of depth estimation. As efficient encoding of multiview sequences became one of the main scopes of the video encoding community, the experimental results are based on the "geometry absent" profile from the incoming MPEG Immersive video standard. The results show that the quality of synthesized views using the proposed recursive block splitting outperforms that of the state-of-the-art approach.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.1
• /
• pp.48-54
• /
• 2002

A part definition must not only provide shape information of a nominal part but also contain non-shape information such as tolerances, surface roughness and material specifications. Although machining features are useful for suitable shape information fur process reasoning in CAPP, they need to be integrated with tolerance information for effective process planning. We develop a tolerance modeler that efficiently integrates the machining features with the tolerance information fur feature-based CAPP. It is based on the association of machining features, tolerance features, and tolerances. The tolerance features in this study, where tolerances are assigned, are classified into two types; one type is a face that is a topological entity on a solid model and the other type is a functional geometry that is not referenced to topological entities. The (unctional geometry is represented by using machining features. All the data fur representing the tolerance information are stored completely and unambiguously in an independent tolerance data structure. The developed tolerance modeler is implemented as a module of a comprehensive feature-based CAPP system.

• Proceedings of the KGS Conference
• /
• 2004.05a
• /
• pp.103-103
• /
• 2004

With the emergency of geographic information systems (GIS), the traditional layer based data model can only contain the spatial geometry and thematic attributes of phenomena. In real world, geographic phenomena have not only spatial geometry and thematic attribute but the temporal situation and the relationship between each phenomenon. (omitted)