• 전기학회논문지
• /
• 제67권4호
• /
• pp.595-599
• /
• 2018

Interruption system with the transformer type superconducting fault current limiter(TSFCL) is proposed in this paper. The interruption system with a TSFCL is a technology that it maximizes the interruption function of a mechanical DC circuit breaker using a transformer and a superconducting fault current limiter. By a TSFCL, the system limits the fault current till the breakable current range in the fault state. Therefore, the fault current could be cut off by a mechanical DC circuit breaker. The Interruption system with a TSFCL were designed using PSCAD/EMTDC. In addition, the Interruption system with a TSFCL was applied to the DC test circuit to analyze characteristics of a current-limiting and a interruption operation. The simulation results showed that the Interruption system with a TSFCL interrupted the fault current in a stable when a fault occurred. Also, The current-limiting rate of the Interruption system with a TSFCL was approximately 69.55%, and the interruption time was less than 8 ms.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권6호
• /
• pp.396-402
• /
• 2005

The software reliability growth model(SRGM) has been developed in order to evaluate such measures as remaining fault number, fault rate, and reliability for the developing stage software. Most of the study literatures assumed that this detecting efficiency was perfect. However the actual fault detecting is generally imperfect, and widely known to many persons. It is not easy to develop and remove the fault existing in the software because the fault finding is difficult, and the exact solving method also not easy, and new fault may be introduced depending on the tester's capability. There, the fault removing efficiency influences the software reliability growth or developing cost of software. It is a very useful measure throughout the developing stage, much helpful for the developer to evaluate the debugging efficiency, and evaluate additional workload. Hence, the study for the imperfect debugging is important in point of software reliability and cost. This paper proposes that the fault debugging is imperfect and new fault may be introduced for the developing software during the developing stage.

• 한국지형학회지
• /
• 제28권1호
• /
• pp.67-81
• /
• 2021

Geomorphological development and distribution at the macro scale provide a clue to the geotectonic characteristics that have affected the geomorphological system. This is because the developmental characteristics and distribution of the landform at the macro scale remain spatial characteristics due to tectonic processes, such as fault activity. From the perspective of tectonic geomorphology, this study identified the developmental characteristics and distribution of the Quaternary landforms in central-southern Yangsan fault and discussed its relevance to fault activity. In this paper, we presented examples and results of morphotectonic analysis of the Yangsan fault, and will present the results of age dating, stratigraphic relationship of the Quaternary landforms, and calculation of cumulative slip rate in the next paper.

• 한국정보기술응용학회:학술대회논문집
• /
• 한국정보기술응용학회 2005년도 6th 2005 International Conference on Computers, Communications and System
• /
• pp.143-146
• /
• 2005

The software reliability growth depends on the testing time because the failure rate varies whether it is long or not. On the other hand, it might be difficult to reduce failure rate for most of the cases are not available for debugging during operational phase, hence, there are some literatures to study that the failure rate is uniform throughout the operational time. The failure rate reduces and the reliability grows with time regardless of debugging. As a result, the products reliability varies with the time duration of these products in point of customer view. The reason of this is that it accumulates the products experience, studies the exact operational method, and then finds and takes action against the fault circumstances. I propose the simple model to represent this status in this paper.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전력기술부문
• /
• pp.385-387
• /
• 2008

When a fault occurs in the distribution system, it is detected by protection system, then protection system is opened and de-energises the feeder where the fault exists. in this paper, the failure rate of protection system will estimate that using a discrete markov approach with failure data of protection system in order to improve the reliability of protection system.

• 품질경영학회지
• /
• 제22권2호
• /
• pp.33-40
• /
• 1994

Most software reliability models and other methods attempt to estimate some measures based on its fault history. There are several phases of the software life cycle including testing phase. We can propose it's stopping rule to decide when to stop the testing and pass it on to the next phase by considering the detailed structure of software and calculating the failure rate when each fault was detected. Downs (1985) proposed a method which was developed for estimating the failure rate applicable only to two-level profiles. In this paper, I extended to profiles involving more levels.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2005년도 학술발표회 논문집
• /
• pp.11-17
• /
• 2005

Along the Ulsan Fault System, many Quaternary faults have been reported and investigated with outcrop observation and trench excavation to clarify the neotectonic movements and fault parameters such as length, displacement, slip rate and recurrence interval. In the northern part of the Ulsan fault system, we have interpreted small scale(1:10,000) aerial photographs and extracted lineaments by geomophological features to select trench site. After precise field survey and tracing for lineaments, two trench sites at Galgokri, Gyeongju were selected on the lineament to elucidate the fault movement history. One is successful in finding faults but the other is not. In the Galgok-Chisil trench(3m(w) x 1.5m(d) x 10m(l)), very closed two Quaternary faults cut the alluvial deposits of which age shows about 10-3ka. More than three times of fault movements can be inferred by geologic structures and C-14 dating. Repeatedly fault movements had been occurred before 10 ka, between 10ka-4.9 ka, between 4.9-1.4 ka at Galgok-Chisil trench section.

• 전기학회논문지
• /
• 제61권12호
• /
• pp.1801-1806
• /
• 2012

This paper presents a simple and practical method which enables to prevent malfunction of protection relay due to differential current caused by one end CT saturation in case of external fault. This method uses difference of magnitude(instantaneous value) between the both end current just before the occurrence of differential current without a separate method to CT staturation detection. One end CT saturation is simulated by current transformer model using type-96 component and the presented method is verified by using EMTP MODELS with respect to internal and external fault with one end CT staturation. The presented method distinguished rightly bewteen external and internal fault with one end CT saturation. This information can be used to prevent malfunction of current differential protection relay in case of external fault. And this method is not affected by sampling rate and has no calculation burden, so it will be applicable to differential current protection relay with ease.

• 한국음향학회지
• /
• 제36권1호
• /
• pp.30-38
• /
• 2017

본 논문에서는 수동 소나 시스템을 위한 수중 음향 센서 결함 탐지 기법을 제안하였다. 일반적으로 수동 소나 시스템에서는 수십개의 음향 센서를 통해 얻은 음향 신호를 이용하여 배열 신호처리 기법을 이용해 처리된 신호를 협대역 또는 광대역 분석을 위한 2차원 영상 형태로 전시한다. 운용 소프트웨어에서 전시되는 탐지 결과는 배열 신호처리를 통해 누적된 결과값을 전시하기 때문에, 단일 센서 채널의 결함 또는 고장에 따른 신호의 이상 여부를 판단하는데 어려움이 있다. 따라서 본 논문에서는 인접 채널간 실효치 비교 및 실효치교차율(Root Mean Square Crossing-Rate, RMSCR) 분석기반 센서 자동 결함 탐지 기법을 제안하고, 결함 센서 채널에 대한 처리 기법을 비교 분석하였다. 제안된 기법의 성능 분석을 위하여 일부 연안 지역에서 실제 운용 중인 센서 배열을 통해 획득된 신호를 이용하여 결함 탐지 정확도를 측정하고, 결함 처리 기법의 성능을 비교하였다. 실험을 통해 제안된 기법이 높은 RMS의 주변소음 환경에서도 높은 결함 탐지 정확도를 보였으며, 결함 처리 기법으로는 0으로 설정 처리 기법이 가장 높은 성능을 보였다.

• 전기학회논문지
• /
• 제56권2호
• /
• pp.277-281
• /
• 2007

We investigated fault current limitation characteristics of the resistive superconducting fault current limiter (SFCL) which consisted of a Bi-2212 bulk coil and a shunt coil. The Bi-2212 bulk coil and the shunt coil were connected in parallel. The Bi-2212 bulk coil was placed inside the shunt coil to induce field-assisted quench. The fault test was conducted at an input voltage of $200V_{rms}$ and fault current of $12kA_{rms}\;and\;25kA_{rms}$. The fault conditions were asymmetric and symmetric, and the fault period was 5 cycles. The test results show that the SFCL successfully limited the fault current of $12kA_{rms}\;and\;25kA_{rms}$ to below $5.5{\sim}6.9kA_{peak}\;within\;0.64{\sim}2.17$ msec after the fault occurred. Limitation was faster under symmetric fault test condition due to the larger change rate of current. We concluded that the speed of fault current limitation was determined by the speed of current rise rather than the amplitude of a short circuit current. These results show that the Bi-2212 bulk coil is suitable for distribution-class SFCLS.